Produkt overview
The Cyseed WiFi Extender Internet Booster is designed to extend your existing wireless network coverage, eliminating dead zones and providing a stable internet connection throughout your home or office. This device amplifies your WiFi signal, allowing more devices to connect reliably over a larger area.
Image: Cyseed WiFi Extender Internet Booster. This image displays the front view of the WiFi extender, featuring two prominent top antennas and two smaller side antennas. The front panel includes three blue LED indicators for power, WPS status, and WiFi signal strength, indicating the device's operational status.
Hvad er der i æsken
- Cyseed WiFi Extender
- Ethernet kabel
- Brugervejledning (dette dokument)
Note: The "Blu-ray" mentioned in some product descriptions is an error and is not included with this product.
Opsætningsvejledning
Metode 1: Opsætning af WPS-knap (anbefales)
- Tænd: Plug the WiFi Extender into an electrical outlet near your main router. Wait for the power indicator light to turn on.
- Aktivér WPS på routeren: Press the WPS button on your main wireless router. Refer to your router's manual for the exact location of the WPS button.
- Activate WPS on Extender: Within 2 minutes of pressing the WPS button on your router, press the WPS button on the Cyseed WiFi Extender. The WPS indicator light on the extender will blink.
- Tilslutningsbekræftelse: Wait for the WPS indicator light on the extender to turn solid, indicating a successful connection. This may take up to 60 seconds.
- Flyt forlænger: Once connected, unplug the extender and move it to a location halfway between your router and the area with poor WiFi signal. Ensure the signal indicator light shows a strong connection (e.g., blue or green, depending on the model's specific indicators).
Metode 2: Web Browser opsætning
- Tænd: Plug the WiFi Extender into an electrical outlet near your main router. Wait for the power indicator light to turn on.
- Opret forbindelse til extenderens netværk: On your computer or smartphone, connect to the WiFi network named "Cyseed_Extender" or similar (without a password).
- Adgangsopsætningsside: Åbn a web browser (e.g., Chrome, Firefox, Safari) and type 192.168.10.1 or extender.local ind i adresselinjen. Tryk på Enter.
- Login: Indtast standardbrugernavn og adgangskode (normalt admin for begge).
- Vælg tilstand: Vælg "Repeatertilstand" eller "Extendertilstand" i opsætningsguiden.
- Scan efter netværk: The extender will scan for available WiFi networks. Select your main router's network from the list.
- Indtast adgangskode: Enter the WiFi password (security key) of your main router's network.
- Configure Extender Network: You can choose to keep the same network name (SSID) as your main router or create a new one (e.g., "YourNetworkName_EXT").
- Anvend indstillinger: Klik på "Anvend" eller "Gem". Forlængeren genstarter.
- Flyt forlænger: Once restarted, unplug the extender and move it to a location halfway between your router and the area with poor WiFi signal. Ensure the signal indicator light shows a strong connection.
Betjeningsvejledning
Tilslutning af enheder
After successful setup, your Cyseed WiFi Extender will broadcast an extended WiFi signal. You can connect your wireless devices (smartphones, tablets, laptops, smart TVs, etc.) to this extended network just as you would to any other WiFi network. Look for the network name you configured during setup (e.g., "YourNetworkName_EXT" or your original network name if you chose to keep it).
Brug af Ethernet-port
The extender is equipped with an Ethernet port (RJ45). This port can be used for two primary functions:
- Kablet forbindelse: Connect a wired device (e.g., desktop computer, gaming console, smart TV) to the extender via an Ethernet cable for a stable, high-speed connection.
- Adgangspunkttilstand: If your extender supports Access Point (AP) mode, you can connect it to your main router via an Ethernet cable. In AP mode, the extender creates a new wireless network, converting a wired connection into a wireless one. Refer to the web browser setup for AP mode configuration if available.
LED-indikatorer
The front panel of the extender features LED indicators that provide information about its status:
- Power LED (ⓘ):
- Solid Blue: Device is powered on.
- Slukket: Enheden er slukket.
- WPS LED (ⓘ):
- Blinking Blue: WPS pairing in progress.
- Solid Blue: WPS pairing successful.
- Off: WPS not active or failed.
- Signal LED (ⓘ):
- Solid Blue: Good signal strength from the main router.
- Solid Red/Orange: Weak signal strength. Consider relocating the extender closer to the main router.
- Off: No signal or not connected to the main router.
Opretholdelse
- Firmwareopdateringer: Kontroller jævnligt producentens webwebsted (Cyseed Store) for available firmware updates. Updating firmware can improve performance, add new features, and fix bugs.
- Rensning: Use a soft, dry cloth to clean the exterior of the extender. Do not use liquid cleaners or aerosols. Ensure the ventilation holes are free from dust to prevent overheating.
- Optimal placering: For best performance, ensure the extender is placed in an open area, away from obstructions like large metal objects, concrete walls, and other electronic devices that may cause interference (e.g., microwaves, cordless phones).
- Genstart: If you experience connectivity issues, try unplugging the extender from the power outlet for 10 seconds and then plugging it back in. This can often resolve minor network glitches.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Extenderen tænder ikke. | No power from outlet; faulty power adapter. | Ensure the power outlet is working. Try a different outlet. Check the power adapter for damage. |
| Cannot connect to the extender's WiFi network during setup. | Extender not broadcasting; incorrect network name. | Ensure the extender is powered on. Wait a few minutes after plugging it in. Verify you are selecting the correct default network name (e.g., "Cyseed_Extender"). |
| Extender not connecting to the main router (Signal LED off or red/orange). | Incorrect WiFi password; extender too far from router; interference. |
|
| Connected to extender, but no internet access. | Extender not properly connected to main router; main router has no internet. |
|
| Slow internet speed when connected to the extender. | Poor extender placement; network congestion; interference. |
|
If you continue to experience issues, please refer to the support section or contact customer service.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | fgefw |
| Produktdimensioner | 2.02 x 3.8 x 10.5 tommer |
| Varens vægt | 8.8 ounce |
| Trådløs Standard | 802.11a/b/g/n/ac, 2.4 GHz Radio Frequency |
| Dataoverførselshastighed | Up to 300Mbps (as per feature bullets, 600 Gigabytes Per Second seems like an error in source data) |
| Særlige funktioner | Access Point Mode, LED Indicator, 1-Tap Setup (WPS) |
| Connector Type | RJ45 Ethernet-port |
| Dækningsområde | Up to 13000 Sq.ft (as per product title/feature bullets) |
| Fabrikant | Cyseed |
| Oprindelsesland | USA |
Note: Data transfer rate of "600 Gigabytes Per Second" from source data appears to be an error. Typical WiFi extenders operate in Megabits per second (Mbps). Based on other product information, 300Mbps is a more realistic speed for a 2.4 GHz N-standard extender.
Garanti og support
For warranty information and technical support, please contact Cyseed customer service. You can often find contact details on the manufacturer's official webhjemmeside eller gennem den forhandler, hvor du købte produktet.
Online support: Besøg embedsmanden Cyseed Store on Amazon for produktinformation og potentielle supportressourcer.
Telefonservice: The product description mentions "live phone service" for setup assistance. Please refer to any included quick start guides or packaging for specific phone numbers.