CFS Replacement Filter Kit Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your CFS Replacement Filter Kit. This kit is designed for use with HL22121, RO150, and RO300 Reverse Osmosis (RO) systems, ensuring high-quality water filtration.

The kit includes a Sediment Cartridge, a Carbon Block Cartridge, a Color-Indicating DI Cartridge filled with MBD-30 Nuclear Grade Resin, and a 150 GPD (Gallons Per Day) Membrane. These components work together to remove sediment, chlorine, bad tastes, odors, and other impurities from your water.

Image: The CFS Replacement Filter Kit, showing the sediment, carbon, DI cartridges, and the 150 GPD membrane.

2. Produktkomponenter

The CFS Replacement Filter Kit consists of the following essential components:

• Sediment Cartridge: This filter is designed to remove larger particles such as sand, silt, rust, and scale from the water, protecting subsequent filters from premature clogging. It provides depth filtering for high dirt holding capacity.
• Carbon Block Cartridge: Utilizes activated carbon to effectively remove chlorine, chloramines, volatile organic compounds (VOCs), and other chemicals that cause bad tastes and odors in water.
• Color-Indicating DI Cartridge: Filled with Resintech MBD-30 Nuclear Grade Resin, this deionization (DI) cartridge removes remaining dissolved solids from the water, producing ultra-pure water. The color-indicating feature provides a visual cue for when the resin is exhausted and needs replacement.
• 150 GPD Membrane: The core of the Reverse Osmosis system, this semi-permeable membrane filters out dissolved salts, heavy metals, bacteria, viruses, and other microscopic impurities, providing up to 150 gallons per day of purified water.

3. Installationsvejledning

Before beginning installation, ensure your RO system is turned off and the water supply is disconnected. Refer to your specific RO system's manual (HL22121, RO150, or RO300) for detailed housing opening and closing procedures.

1. Forbered systemet: Turn off the water supply to the RO system and depressurize the system by opening the filtered water faucet.
2. Fjern gamle filtre: Carefully unscrew the filter housings using a filter wrench. Remove the old sediment, carbon, and DI cartridges. Dispose of them properly.
3. Clean Housings: Clean the inside of the filter housings with warm, soapy water and rinse thoroughly. Inspect O-rings for damage and replace if necessary. Lubricate O-rings with food-grade silicone grease.
4. Installer nye blækpatroner:
   • Insert the new Sediment Cartridge into its housing.
   • Insert the new Carbon Block Cartridge into its housing.
   • Insert the new Color-Indicating DI Cartridge into its housing.
   Ensure cartridges are seated correctly.
5. Install New RO Membrane (if applicable): If replacing the RO membrane, open the membrane housing. Remove the old membrane and insert the new 150 GPD membrane, ensuring the end with the two O-rings goes in first. Secure the cap.
6. Secure Housings: Hand-tighten all filter housings and the membrane housing. Do not overtighten.
7. Genopret vandforsyningen: Slowly turn on the water supply to the RO system. Check for leaks.
8. Skyl systemet: Allow the system to fill and then flush the new filters by letting water run through the filtered water faucet for at least 10-15 minutes, or until the water runs clear and free of air bubbles. This is crucial for carbon filters to remove any loose carbon fines.

Note: The color-indicating DI resin will change color as it becomes exhausted, typically from blue/green to amber/brown.

4. Betjeningsvejledning

Once installed and flushed, your CFS Replacement Filter Kit will begin purifying water. The system operates automatically, producing purified water as needed and storing it in the RO tank.

• Indledende brug: After flushing, the first tank of water produced by the RO system should be drained to ensure optimal performance and taste.
• Overvågning af vandkvalitet: For systems with a TDS (Total Dissolved Solids) meter, regularly check the TDS levels of the purified water. A significant increase in TDS indicates that the RO membrane or DI resin may need replacement.
• Flowhastighed: Monitor the flow rate of purified water. A decrease in flow rate can indicate clogged filters or a fouled RO membrane.

5. Vedligeholdelse

Regular maintenance is crucial for the longevity and efficiency of your RO system and the quality of your water. The following replacement schedule is recommended, but may vary based on water quality and usage:

• Sediment- og kulfiltre: Replace every 6 months. These filters are the first line of defense and their timely replacement protects the RO membrane.
• DI Cartridge: Replace when the color-indicating resin changes color, or when TDS levels of the purified water begin to rise. This typically occurs every 6-12 months depending on the incoming water quality and usage.
• RO Membrane (150 GPD): Replace every 2-3 years. The lifespan of the membrane is highly dependent on the effectiveness of the pre-filters and the quality of the incoming water.

Always ensure the water supply is off and the system is depressurized before performing any maintenance.

6. Fejlfinding

If you encounter issues with your RO system after installing the replacement filter kit, consider the following common problems and solutions:

If problems persist, contact CFS customer support for further assistance.

7. Specifikationer

8. Officiel produktvideo

Watch this video from Complete Filtration Services Inc. to learn more about their range of filtration products and commitment to quality.

9. Garanti og support

CFS (Complete Filtration Services) is committed to providing quality products. For specific warranty information regarding this replacement filter kit, please refer to the documentation provided with your original RO system or contact CFS directly.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Complete Filtration Services Inc. through their official channels or visit their store on Amazon:

CFS Store on Amazon: Visit the CFS Store

When contacting support, please have your product model (HL22121, RO150/300) and the UPC (810172420038) available for quicker service.