GLOBE Electric 66000138 2-lyss delvist indbygget loftslampe brugermanual

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your GLOBE Electric 66000138 2-Light Semi-Flush Mount Ceiling Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The GLOBE Electric 66000138 is a 2-light semi-flush mount ceiling fixture featuring a matte black finish and a 2-tier white linen shade. Its contemporary design is suitable for various indoor settings, including dining rooms, kitchens, and living rooms.

Image 1.1: The GLOBE Electric 66000138 2-Light Semi-Flush Mount Ceiling Light with its matte black base and two-tiered white linen shade.

2. Vigtige sikkerhedsoplysninger

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing.

• Always turn off the main power supply at the circuit breaker before installing or performing any maintenance on the fixture.
• Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
• Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electric Code (NEC).
• Brug kun den specificerede pæretype og wattage (2x E26/Medium Base 60W max). Exceeding the maximum wattage can cause overheating and damage to the fixture.
• Installer ikke denne armatur i våde eller dråber.amp steder. Den er kun beregnet til indendørs brug.
• Handle the linen shade and bulbs with care to prevent damage.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x Semi-Flush Mount Ceiling Light Fixture (Model 66000138)
• Mounting Hardware (including mounting plate, screws, wire nuts)
• Installationsvejledning

Bemærk: Pærer er ikke inkluderet og skal købes separat.

4. Produktspecifikationer

Image 4.1: Dimensional diagram of the ceiling light, showing a 15-inch diameter and 9.75-inch height.

5. Opsætning og installation

Before you begin, ensure you have the necessary tools: screwdriver, wire strippers, electrical tape, and safety glasses.

Trin-for-trin installation:

1. Sluk for strømmen: Locate the circuit breaker that controls the power to the light fixture location and turn it off. Verify power is off using a voltage tester.
2. Forbered monteringsplade: Attach the mounting plate (included in hardware) to the electrical junction box in the ceiling. Ensure it is securely fastened. Note: Some older electrical boxes may require shorter mounting screws than those provided. Check for proper fit and acquire suitable screws if necessary.
3. Ledningsforbindelser: Carefully connect the electrical wires from the fixture to the wires in the junction box.
   • Tilslut sort wire (hot) from the fixture to the sort wire (hot) from the junction box.
   • Tilslut hvid wire (neutral) from the fixture to the hvid wire (neutral) from the junction box.
   • Tilslut jord ledning (blank kobber eller grøn) fra armaturet til jord wire from the junction box.
   Fastgør alle forbindelser med trådmøtrikker og pak dem ind med elektrikertape for ekstra sikkerhed.
4. Monter armaturet: Carefully push the wired connections into the junction box. Align the fixture base with the mounting plate and secure it using the provided screws.
5. Installer pærer: Screw two E26/Medium Base 60W maximum bulbs (sold separately) into the sockets. Do not overtighten.
6. Fastgør skærm: Carefully attach the 2-tier linen shade to the fixture according to the product design. Ensure it is stable and secure.
7. Gendan strøm: Turn the power back on at the circuit breaker. Test the light fixture.

Billede 5.1: Et nærbillede view of the two E26 bulb sockets within the matte black fixture base, ready for bulb installation.

6. Betjeningsvejledning

Tænd/sluk:

Operate the light fixture using a standard wall light switch connected to the circuit. Ensure the switch is in the 'ON' position for the light to function.

Dæmpbar funktion:

This fixture is fully dimmable. To utilize the dimming function, you must install a compatible dimmer switch (sold separately) in place of your standard wall switch. Follow the dimmer switch manufacturer's instructions for installation and operation.

Pære kompatibilitet:

The fixture requires two E26/Medium Base bulbs with a maximum wattage of 60W each. It is compatible with both LED and Incandescent bulbs. For smart lighting solutions, consider using Globe Electric Smart bulbs (sold separately).

Billede 6.1: Eks.amples of compatible E26 base bulbs, including standard LED, Edison-style, and Wi-Fi enabled smart bulbs.

7. Vedligeholdelse

Rensning:

To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry cloth to wipe down the matte black metal components. For the linen shade, gently dust with a soft brush or a lint-free cloth. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish and shade material.

Udskiftning af pære:

Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely before touching them. Unscrew the old bulbs and screw in new E26/Medium Base bulbs, ensuring they do not exceed 60W each. Restore power after replacement.

8. Fejlfinding

Hvis du støder på problemer med din lampe, kan du se følgende almindelige problemer og løsninger:

9. Garanti og support

Garantioplysninger:

This product is sold without an explicit warranty. Please refer to your retailer's return policy for any issues upon purchase.

Kundesupport:

For further assistance or inquiries regarding your GLOBE Electric product, please visit the official Globe Electric website or contact their customer service department. You can often find contact information on the manufacturer's webwebstedet eller gennem dit købssted.

Besøg GLOBE Electric Store on Amazon for flere produkter og information.