Indledning
This manual provides essential information for the safe installation, operation, and maintenance of your GLOBE 180-Degree Twin Head Motion Sensor LED Security Flood Light. Please read this manual thoroughly before installation and retain it for future reference.

Front view of the GLOBE 180-Degree Twin Head Motion Sensor LED Security Flood Light.
Sikkerhedsoplysninger
ADVARSEL: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Sørg for, at strømforsyningen er slukket før installation.
- Forsøg ikke at ændre armaturet.
- Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
- This fixture is designed for outdoor use and is weather-resistant.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 1 x GLOBE 180-Degree Twin Head Motion Sensor LED Security Flood Light
- Monteringsudstyr (skruer, trådmøtrikker, monteringsplade)
- Instruktionsmanual
Opsætning og installation
This flood light is designed for wall mount installation only. Follow these steps carefully:
- Sluk for strømmen: Locate the circuit breaker controlling the outdoor lighting circuit and turn it off. Verify power is off using a voltage tester.
- Forbered monteringsoverfladen: Sørg for, at monteringsfladen er ren, tør og strukturelt sund.
- Fastgør monteringsplade: Fastgør monteringspladen til samledåsen med de medfølgende skruer.
- Ledningsforbindelser: Connect the fixture wires to your household wiring using the wire nuts.
- Connect the black fixture wire to the black (live) household wire.
- Connect the white fixture wire to the white (neutral) household wire.
- Connect the green or bare copper fixture wire to the green or bare copper (ground) household wire.
- Monteringsbeslag: Carefully push the wired fixture onto the mounting plate and secure it with the provided screws. Ensure no wires are pinched.
- Forsegling (valgfrit men anbefalet): Apply silicone sealant around the edges of the fixture where it meets the wall to prevent water intrusion.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.

The flood light is designed for wall mount installation only. Ensure proper mounting for optimal performance.

Product dimensions: 7.09"L x 4.49"W x 7.09"H. Refer to this diagram for precise measurements during installation.
Betjeningsvejledning
Your GLOBE security flood light features a motion sensor and adjustable lamp hoveder.
Bevægelsessensordrift
The integrated motion sensor detects movement within a 180-degree detection zone, up to 40 feet (12.2 meters) away. The light will automatically turn on when motion is detected and turn off after a set period of no motion.

The motion sensor provides a 180-degree detection zone, covering up to 40 feet (12.2 meters) for enhanced security.
Justering af Lamp Hoveder
The twin lamp Hovederne kan justeres for at tilpasse lysdækningsområdet. Tag forsigtigt fat i hvertamp hovedet og vip det op, ned eller fra side til side efter behov. Der kræves ingen værktøj til denne justering.

Lamp heads can be manually adjusted to direct light precisely where it's needed.
Lysudgang
The fixture provides 1000 lumens of bright white light with a 4000 Kelvin color temperature, ideal for security and general outdoor illumination.

The 1000 lumens output provides ample brightness for outdoor security and visibility.
Opretholdelse
This LED security flood light requires minimal maintenance.
- Rensning: Tør armaturet regelmæssigt af med en blød kludamp klud til at fjerne snavs og rester. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening.
- lysdioder: The integrated LEDs are designed for long life and are not user-replaceable.

The fixture is outdoor-rated and weather-resistant, designed to withstand various elements.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | No power; faulty wiring; sensor malfunction. | Check circuit breaker. Verify wiring connections. Ensure sensor is not obstructed. |
| Lyset forbliver tændt konstant. | Constant motion detected; sensor sensitivity too high; wiring error. | Check for continuous motion in detection zone. Adjust sensor sensitivity (if applicable, though not explicitly stated as adjustable in product info). Recheck wiring. |
| Lyse flimrer. | Løs ledningsforbindelse; strømsvingninger. | Check and tighten all wiring connections. Consult an electrician if power fluctuations persist. |
| Bevægelsessensor registrerer ikke. | Sensor obstructed; incorrect angle; extreme temperature. | Clear any obstructions. Adjust sensor angle. Allow sensor to acclimate to temperature. |
Specifikationer
- Mærke: GLOBUS
- Modelnavn: 17000200
- Farve: Sort
- Materiale: Harpiks
- Lyskildetype: Integreret LED
- Lysstyrke: 1000 lumen
- Farvetemperatur: 4000 Kelvin (Daylight White)
- Wattage: 10 watt
- Voltage: 120 volt
- Bevægelsesdetektion: 180-degree, up to 40 feet (12.2 meters)
- Installationstype: Vægmontering
- Indendørs/udendørs brug: Udendørs
- Særlige funktioner: Motion Sensor, Water Resistant
- Produktdimensioner: 7.09 cm L x 4.49 cm B x 7.09 cm H
- Varens vægt: 1.54 pund
Garanti og support
This GLOBE security flood light is backed by a 3-year manufacturer's limited warranty.
For warranty claims or technical support, please visit the official GLOBE website or contact their customer service. You can find more information and products from GLOBE at their Amazon store: Visit the GLOBE Store.





