Triplett WS230 vægscanner brugermanual

1. Introduktion

The Triplett WS230 Wall Scanner is a versatile and compact tool designed for accurately detecting hidden objects behind walls. It features advanced capabilities to locate wood studs, metal objects (ferrous and non-ferrous), and live AC wiring, providing essential information for construction, home improvement, and maintenance tasks. This manual provides detailed instructions for safe and effective use of your WS230 Wall Scanner.

2. Sikkerhedsoplysninger

Læs alle sikkerhedsadvarsler og instruktioner omhyggeligt, inden du bruger enheden. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• Always assume that live electrical wires are present behind walls. Exercise extreme caution.
• Do not rely solely on the detection results. Always verify findings through other means if possible.
• Keep the device dry and clean. Do not expose it to moisture or extreme temperatures.
• Forsøg ikke at åbne eller ændre enheden. Overlad al service til kvalificeret personale.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Triplett WS230 Wall Scanner
• 3.7V/300mAh Lithium Ion Battery (pre-installed)
• Soft Protective Pouch Case
• Brugervejledning (dette dokument)
• USB Type C ladekabel

Figure 3.1: WS230 Wall Scanner with Pouch and USB-C Cable

4. Produktet er slutview

Familiarize yourself with the components of your Triplett WS230 Wall Scanner.

Figur 4.1: Forside View of WS230 Wall Scanner

Figur 4.2: Tilbage View of WS230 Wall Scanner (QR Code: C242594011)

4.1 nøglekomponenter

• Farve LCD-skærm: Displays detection mode, depth, battery status, and object location.
• Power knap: Tænder/slukker enheden.
• Knapper til valg af tilstand: Allows switching between Stud, Metal, and AC Voltage detection modes.
• Sensor Area: Located on the back of the device, this area must be in contact with the wall for accurate scanning.
• USB-C opladningsport: For recharging the internal Lithium-ion battery.

5. Opsætning og opladning

5.1 Opladning af batteriet

The WS230 is equipped with a rechargeable 3.7V/300mAh Lithium-ion battery. Before first use, ensure the device is fully charged.

1. Connect the provided USB Type C charging cable to the charging port on the device.
2. Tilslut den anden ende af USB-kablet til en standard USB-strømadapter (medfølger ikke) eller en USB-port på computeren.
3. Batteriindikatoren på LCD-skærmen viser opladningsstatus. En fuld opladning tager typisk et par timer.

5.2 Tænd/sluk

• For at tænde skal du trykke på og holde nede Power knap (red button) until the screen illuminates.
• For at slukke, skal du trykke på og holde nede Power knap again until the screen turns off.

6. Betjening

6.1 Generelle brugsretningslinjer

• Sørg for, at vægoverfladen er ren og tør.
• Avoid scanning over freshly painted or wallpapered surfaces until they are completely dry, as moisture can affect accuracy.
• Hold the scanner flat against the wall, ensuring the sensor area is in full contact.
• Move the scanner slowly and steadily across the surface.

6.2 Automatisk kalibrering

The WS230 features automatic calibration for accurate results. Calibration occurs automatically upon power-on or when switching detection modes.

1. Place the scanner flat against the wall in an area where you are certain there are no studs, metal, or live wires.
2. Tryk på Power knap or select your desired mode. The screen will display "Calibrating, please wait."
3. Keep the device still against the wall until calibration is complete.

Figure 6.1: Calibration in Progress

6.3 Detektionstilstande

The WS230 offers three primary detection modes:

Figure 6.2: Multiple Detection Mode Displays

6.3.1 Stud Detection

This mode locates the center and edges of wood or metal studs behind walls.

• Select the Stud Detection mode using the appropriate button.
• Place the scanner flat against the wall and slowly move it horizontally.
• The display will indicate the presence of a stud, its center, and depth (up to 1.5 inches / 38mm). Audio alerts will also sound.

Figure 6.3: Wood Stud Detection

6.3.2 Metal Detection

This mode identifies ferrous and non-ferrous metals, such as pipes and electrical wiring (even if not live).

• Select the Metal Detection mode.
• Scan the wall slowly. The display will show "Detect metal" and indicate the object's location and type (magnetic/non-magnetic).
• Maximum detection depth is 4.0 inches (100mm).

Figure 6.4: Metal Detection

Figure 6.5: Non-Magnetic Metal Detection

6.3.3 AC Voltage Registrering

This mode specifically detects live AC wires behind walls, providing an essential safety feature.

• Select the AC Voltage Detection mode.
• Scan the wall slowly. The display will show a lightning bolt icon and indicate the presence of live AC wiring.
• Maximum detection depth is 2 inches (50mm).

7. Vedligeholdelse

• Rengør enheden med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Store the device in its protective pouch in a cool, dry place when not in use.
• Regularly charge the battery to maintain its health, even if the device is not used frequently.

8. Fejlfinding

If you encounter issues with your WS230 Wall Scanner, try the following:

• Upræcise læsninger: Ensure the device is properly calibrated on a clear section of the wall. Check for moisture on the wall surface.
• Ingen strøm: Verify the battery is charged. Connect the USB-C cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Intermittent Detection: Ensure the sensor area is in full contact with the wall and you are moving the device slowly and steadily.

If problems persist, contact Triplett customer support.

9. Specifikationer

Figure 9.1: WS230 Dimensions

10. Garanti og support

For warranty information or technical support, please refer to the official Triplett webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.

Visit the official Triplett Store: Triplett Store on Amazon