Indledning
This instruction manual provides essential information for the proper installation, operation, and maintenance of your new ILIFE Original Side Brushes. Please read this manual thoroughly before use to ensure optimal performance and longevity of the brushes and your robotic vacuum cleaner. Keep this manual for future reference.
Kompatibilitet
These original ILIFE side brushes are designed for use with the following ILIFE robotic vacuum cleaner models:
- ILIFE A40
- ILIFE A4s
- ILIFE S5
- ILIFE S5 Pro
- ILIFE V4
- ILIFE V5s Pro
- ILIFE V5x
Using these brushes with incompatible models may result in improper fit or reduced cleaning performance.
Pakkens indhold
Din pakke inkluderer:
- 3 x ILIFE Original Side Brushes (Pack of 3)

Image: The product packaging for ILIFE Robotic Vacuum Cleaner Accessories, showing the brand logo and the text 'Robotic Vacuum Cleaner Accessories'. Below the packaging, three sets of black, three-pronged side brushes are displayed, indicating the contents of the pack.
Installationsvejledning
Follow these steps to install or replace the side brushes on your ILIFE robotic vacuum cleaner:
- Sluk: Ensure your robotic vacuum cleaner is powered off and disconnected from its charging base before beginning installation.
- Vend om: Carefully turn the robotic vacuum cleaner upside down to access the underside.
- Find pensler: Identify the existing side brushes (if any) and their mounting points. There are typically two side brushes.
- Remove Old Brushes (if applicable): If replacing old brushes, gently pull them upwards to detach them from their posts. Some models may require unscrewing a small screw in the center of the brush. Use a screwdriver if necessary.
- Installer nye børster: Align the central hole of the new side brush with the corresponding post on the vacuum cleaner. Press down firmly until it clicks into place. If your model uses screws, secure the brush with the screw. Ensure the brushes are securely attached and can rotate freely.
- Gentage: Repeat the process for the second side brush.
- Tænd: Turn the vacuum cleaner right-side up and power it on to confirm proper installation.
Operation
Once installed, the side brushes will automatically operate with your ILIFE robotic vacuum cleaner. Their primary function is to sweep debris, dust, and dirt from edges, corners, and along walls into the vacuum's main cleaning path, ensuring comprehensive floor coverage.
Vedligeholdelse og udskiftning
Regular maintenance of your side brushes is crucial for maintaining optimal cleaning performance:
- Rensning: Periodically check the side brushes for tangled hair, threads, or other debris. Carefully remove any obstructions using your fingers or a small cleaning tool.
- Inspektion: Inspect the bristles for wear and tear. Over time, bristles may become bent or frayed, reducing their effectiveness.
- Udskiftning: It is recommended to replace the side brushes every 3-6 months, or sooner if significant wear is observed, to ensure consistent cleaning performance. Refer to the 'Installation Instructions' section for replacement steps.
Fejlfinding
If you encounter issues with your side brushes, refer to the table below:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Side brush not spinning | Tangled hair or debris; Loose installation | Clean brushes of obstructions; Reinstall brushes securely |
| Reduced cleaning effectiveness | Worn or bent bristles; Brushes are dirty | Replace brushes; Clean brushes thoroughly |
| Unusual noise from brushes | Debris caught in brush mechanism; Damaged brush | Remove debris; Replace damaged brush |
Produktspecifikationer
- Mærke: ILIFE
- Farve: Sort
- Produktdimensioner: 14L x 14W x 2H Centimeters (approximate, for a single brush)
- Inkluderede komponenter: Side Brush (Pack of 3)
- Varens vægt: 500 g (hele pakken)
- Fabrikant: ILIFE Innovations
Garanti og support
For warranty information or technical support regarding your ILIFE Original Side Brushes, please refer to the documentation provided with your ILIFE robotic vacuum cleaner or contact ILIFE customer service directly. Contact details for ILIFE Innovations can typically be found on their official webwebstedet eller på produktemballagen.
Manufacturer Contact: 1800-274-5433





