1. Introduktion
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUTEC 13-inch Dusk to Dawn Outdoor Wall Sconce (Model 5273003012). Please read all instructions carefully before beginning installation and retain this manual for future reference.
The LUTEC outdoor wall sconce features a modern design with a matte metal frame and double glazing, equipped with a dusk to dawn sensor for automatic operation. It is designed for outdoor use and is weather-resistant.
2. Sikkerhedsoplysninger
- Always turn off power at the main circuit breaker before installation or servicing.
- Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
- Sørg for, at alle ledningsforbindelser er sikre og overholder lokale el-forskrifter.
- Overskrid ikke det maksimale wattage specificeret for pæren.
- Håndter glaskomponenter forsigtigt for at forhindre brud.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- LUTEC 13-inch Outdoor Wall Sconce (Quantity: 2)
- Mounting Screws (Quantity: 2 per fixture)
- Wire Nuts (Quantity: 3 per fixture)
- Instruktionsmanual
Figur 1: Produktmål og medfølgende tilbehør
4. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | LUTEC |
| Modelnummer | 5273003012 |
| Farve | Sort |
| Materiale | Aluminium, glas |
| Stil | Moderne |
| Produktdimensioner | 7.01 cm L x 8.03 cm B x 12.8 cm H |
| Varens vægt | 5 pund |
| Strømkilde | AC |
| Pære base | E26 |
| Max Wattage | 40W |
| Voltage | 120Vac 60Hz |
| Controller type | Dusk to Dawn |
| Vandmodstandsniveau | Vandtæt |
| Indendørs/Udendørs brug | Udendørs |
5. Installation
Follow these steps to install your outdoor wall sconce:
- Forbered installationsområdet: Turn off power at the circuit breaker. Ensure the mounting surface is clean and stable.
- Monter armaturet: Secure the mounting bracket to the junction box using the provided screws. Connect the electrical wires (live, neutral, ground) from the fixture to your household wiring using the wire nuts.
- Installer pæren: The fixture uses an E26 base bulb (not included). Gently unscrew the bottom plate of the fixture to access the bulb socket. Screw in an E26 bulb, ensuring it does not exceed 40W. Reattach the bottom plate securely.
Figure 2: Bulb Installation
For a visual guide on bulb installation and initial operation, please refer to the video below:
Video 1: Bulb Installation and Initial Light Activation
This video demonstrates the process of screwing in the E26 bulb into the fixture and shows the light activating. It also briefly illustrates the light turning on at dusk and off at dawn.
6. Betjening
The LUTEC outdoor wall sconce is equipped with an integrated Dusk to Dawn sensor, which automates its operation based on ambient light levels.
- Automatisk tænding: The light will automatically turn on when the ambient light level drops (at dusk or in dark conditions).
- Automatisk fra: The light will automatically turn off when sufficient ambient light is detected (at dawn).
Figure 3: Dusk to Dawn Sensor
Figure 4: Automatic Dusk to Dawn Functionality
7. Vedligeholdelse
To ensure optimal performance and longevity of your outdoor wall sconce, follow these maintenance guidelines:
- Rensning: Periodically clean the glass panels and metal frame with a soft, damp klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
- Udskiftning af pære: When replacing the bulb, ensure the power is off at the circuit breaker. Use only E26 base bulbs with a maximum wattage på 40W.
- Vejrbestandighed: The fixture is designed to be waterproof and resistant to various weather conditions including rain, snow, sun, and wind. Regular inspection for any damage to seals or housing is recommended.
Figure 5: Weather Resistance Features
8. Fejlfinding
If you encounter issues with your LUTEC outdoor wall sconce, refer to the following common problems and solutions:
- Lyset tænder ikke:
- Kontroller om strømmen er tændt ved afbryderen.
- Sørg for, at pæren er korrekt installeret og ikke brænder ud.
- Verify that the dusk to dawn sensor is not obstructed by debris or positioned in an area that receives constant light.
- Lyset forbliver tændt i løbet af dagen:
- Check if the dusk to dawn sensor is obstructed or covered, preventing it from detecting daylight.
- Ensure there are no external light sources (e.g., other bright lights) directly illuminating the sensor.
- Lys flimrer:
- Sørg for, at pæren er skruet forsvarligt ind i fatningen.
- Tjek for løse ledningsforbindelser.
9. Garanti og support
LUTEC provides 7*24h after-sales service for this product. For warranty information or technical support, please contact LUTEC customer service directly. Keep your purchase receipt as proof of purchase.
