Produkt overview
The AOOEPU 1200Mbps Dual Band WiFi Extender is designed to expand your existing wireless network coverage, eliminating dead zones and providing stable internet access throughout your home or office. It supports both 2.4GHz and 5GHz frequency bands, offering high-speed data transfer rates up to 1200Mbps.
Nøglefunktioner omfatter:
- Nem opsætning: One-tap WPS button setup or web browserkonfiguration.
- High-Speed Stable Signal: Dual-band technology (2.4/5GHz) for up to 1200Mbps.
- Full Signal Coverage: Four high-gain external antennas for 360-degree coverage, reducing signal loss through walls.
- Flere tilstande: Supports Repeater, Access Point (AP), and Router modes.
- Ethernet-porte: Two Ethernet ports for wired device connections.
- Forbedret sikkerhed: Maximizes network security to prevent unauthorized access and protect data.

Figure 1: AOOEPU 1200Mbps Dual Band WiFi Extender. This image shows the front view of the white extender with its four adjustable antennas and two Ethernet ports at the bottom. The device is designed to plug directly into a wall outlet.
Opsætningsvejledning
Follow these steps to set up your AOOEPU WiFi Extender:
- Tænd: Plug the WiFi Extender into a standard wall outlet. Wait for the indicator lights to stabilize.
- Opret forbindelse til extenderens netværk: On your computer, tablet, or smartphone, open your Wi-Fi settings. Look for a new Wi-Fi network broadcasted by the extender (e.g., "wifi-2.4g-F6E0" or "wifi-5g-F6E0"). Connect to one of these networks.
- Adgangsopsætningsside: Once connected, a captive portal login window should automatically open in your web browser, prompting you to set up the repeater. If it doesn't, open a web browser og naviger til 192.168.188.1.
- Vælg tilstand: Choose "Repeater" mode from the options presented.
- Enter Host Wi-Fi Password: The setup page will prompt you to enter the SSID (network name) and password of your existing home Wi-Fi network (the host router). Enter the correct password.
- Bekræft forbindelse: After entering the password and clicking "Connect" or "Next", the extender will attempt to connect to your host Wi-Fi network. This process may take a few moments.
- Bekræft forbindelsen: Once the setup is complete, new Wi-Fi networks (e.g., "Extender-PRO-2.4G" and "Extender-PRO-5G") will become available. Connect your devices to these new extended networks using your original home Wi-Fi password. The signal indicator lights on the extender should light up, confirming a successful relay.
For WPS setup, simply press the WPS button on your main router, then within two minutes, press the WPS button on the AOOEPU WiFi Extender. The devices will automatically connect and extend the network.
Betjeningsvejledning
Once set up, the AOOEPU WiFi Extender operates automatically to provide extended Wi-Fi coverage. Here are some operational tips:
- Optimal placering: Place the extender midway between your router and the area with poor Wi-Fi signal. Avoid placing it near large metal objects, microwave ovens, or other devices that may cause interference.
- Indikatorlys:
- Strømlys: Angiver, at enheden er tændt.
- 2.4G/5G Lights: Indicate activity on the respective frequency bands.
- Signallys: Show the strength of the signal received from your main router. More lights indicate a stronger connection.
- Ethernet-porte: Use the two Ethernet ports to connect wired devices such as smart TVs, gaming consoles, desktop computers, or network-attached storage (NAS) for a stable, high-speed connection.
- Skift af bånd: Your devices will automatically connect to the optimal band (2.4GHz or 5GHz) based on signal strength and network congestion. You can manually select "Extender-PRO-2.4G" or "Extender-PRO-5G" from your device's Wi-Fi settings if you prefer a specific band.
Opretholdelse
To ensure optimal performance and longevity of your WiFi Extender:
- Hold rent: Regularly wipe the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ventilation: Sørg for, at ventilationshullerne ikke er blokerede for at forhindre overophedning.
- Firmwareopdateringer: Kontroller jævnligt producentens website for firmware updates. Updating firmware can improve performance, add new features, and enhance security.
- Nulstil: If you experience persistent issues or wish to reconfigure the extender, use the reset button located on the side. Press and hold the reset button for approximately 5-10 seconds until the lights flash, indicating a factory reset.
Fejlfinding
If you encounter issues with your WiFi Extender, try the following solutions:
- Ingen internetadgang:
- Sørg for, at din primære router har en aktiv internetforbindelse.
- Verify the extender is properly connected to your main router's Wi-Fi network (check signal lights).
- Prøv at genstarte både din primære router og extenderen.
- Re-run the setup process to ensure the correct Wi-Fi password was entered.
- Svagt signal eller lav hastighed:
- Relocate the extender closer to your main router, but still within the area needing extended coverage.
- Justér antennerne for bedre modtagelse.
- Minimér interferens fra andre elektroniske enheder.
- Ensure your main router is providing a strong signal.
- Kan ikke få adgang til opsætningssiden:
- Ensure your device is connected to the extender's initial Wi-Fi network (e.g., "wifi-2.4g-F6E0").
- Prøv en anden web browser.
- Ryd din browsers cache og cookies.
- Perform a factory reset on the extender and try again.
- Extender Disconnects Frequently:
- Se efter firmwareopdateringer.
- Ensure the extender is not overheating.
- Consider changing the channel on your main router to avoid congestion.
Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 7.48 x 3.74 x 2.8 tommer |
| Varens vægt | 5.6 ounce |
| Varemodelnummer | AOOEPU-AV1 |
| Mærke | AOOEPU |
| Standard for trådløs kommunikation | 802.11ac |
| Dataoverførselshastighed | 1200 Mbps (1.2E+3 Megabytes Per Second) |
| Frekvensbåndsklasse | Dual Band (2.4 GHz & 5 GHz) |
| Inkluderede komponenter | WiFi Extender |
| Speciel funktion | Aftagelig antenne |
| Connector Type | Ethernet (2 ports) |
| Farve | white-mr1 |
| Kompatible enheder | Security Camera (and other Wi-Fi enabled devices) |
| Fabrikant | AOOEPU-J03 |
| Dato først tilgængelig | 10. juli 2024 |
Garanti og support
For warranty information, technical support, or to access additional resources, please refer to the official AOOEPU webwebstedet eller kontakt deres kundeservice. Gem din købskvittering til garantikrav.
For the latest drivers, firmware, and FAQs, visit the manufacturer's support page. You can often find detailed troubleshooting guides and community forums there.




