1. Vigtige sikkerhedsinstruktioner
Please read all instructions carefully before using this appliance. Failure to follow these instructions may result in fire, electric shock, or injury.
- Sæt altid varmeapparater direkte i en stikkontakt/stikkontakt. Brug aldrig med en forlængerledning eller flytbar el-hane (stikkontakt/stikdåse).
- Denne varmeovn er varm, når den er i brug. For at undgå forbrændinger, lad ikke bar hud berøre varme overflader.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater, and keep them away from the sides and rear.
- Ekstrem forsigtighed er nødvendig, når et varmeapparat bruges af eller i nærheden af børn eller handicappede, og når varmeapparatet efterlades i drift og uden opsyn.
- Brug ikke varmeapparater med en beskadiget ledning eller stik, eller efter at varmeapparatet ikke fungerer korrekt, er blevet tabt eller beskadiget på nogen måde.
- Må ikke bruges udendørs.
- For at afbryde varmeren skal du dreje knapperne til OFF og derefter tage stikket ud af stikkontakten.
- Indsæt eller lad ikke fremmedlegemer trænge ind i ventilations- eller udsugningsåbninger, da dette kan forårsage elektrisk stød eller brand eller beskadige varmeren.
- For at forhindre en mulig brand, må du ikke blokere luftindtag eller udstødning på nogen måde. Må ikke bruges på bløde overflader, som f.eks. en seng, hvor åbninger kan blive blokeret.
- This heater is equipped with overheat protection. If the heater overheats, it will automatically shut off. To reset, unplug the heater from the electrical outlet, wait 5-10 minutes for the unit to cool, then plug it back in.
- The top air outlet has a high heat dissipation temperature. Avoid touching it directly during or immediately after operation.
- Not recommended for use on carpets due to potential heat retention and fire risk.
- Constructed with V0 flame-retardant materials for enhanced safety.
2. Produktet er slutview
The Air Choice DL16F Baseboard Heater is designed to provide efficient and quiet heating for indoor spaces. It features an electric fireplace effect, adjustable thermostat, and a 12-hour timer.
Billede 2.1: Forside view of the Air Choice 33-inch Baseboard Heater, showing the flame effect display and included remote control.
Pakkeindhold:
- Air Choice DL16F Baseboard Heater
- Fjernbetjening
- Brugermanual
Nøglefunktioner:
- 1500W heating power with two modes (700W/1500W)
- Adjustable thermostat (59°F to 99°F)
- 3D dancing flame effect with three operation modes (flame only, heat only, flame + heat)
- 12-timers timerfunktion
- Quiet operation (approximately 20dB)
- Overheat protection and V0 flame-retardant materials
- LED touch screen and remote control operation
- Portable design with built-in handles
3. Opsætning
- Udpakning: Tag forsigtigt varmelegemet ud af emballagen. Gem emballagen til senere opbevaring eller transport.
- Placering: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater from any combustible materials (furniture, curtains, bedding, etc.). Do not place on carpeted surfaces.
- Strømtilslutning: Ensure the heater is turned off before plugging it into a standard 120V AC electrical outlet. Do not use extension cords or power strips.
4. Betjeningsvejledning
The heater can be operated using the LED touch screen controls on the unit or the included remote control.
4.1 Tænd/sluk
- Tryk på Magt button on the unit's touch screen or the remote control to turn the heater on or off.
4.2 Heating Modes and Temperature Adjustment
Image 4.1: Visual representation of the two heating modes: 700W (low) and 1500W (high).
- Opvarmningstilstande: Tryk på Mode button to cycle between Low (700W) and High (1500W) heating settings.
- Temperaturindstilling: Brug Temp op og Temp ned buttons on the remote control to set your desired temperature between 59°F and 99°F. The heater will automatically cycle on and off to maintain the set temperature.
4.3 Flammeeffektkontrol
- Tryk på Flamme button to activate or deactivate the 3D flame effect.
- The flame effect can be used independently without the heating function, or in conjunction with it.
4.4 Timer funktion
Image 4.2: The heater features a 12-hour timer for automatic shut-off.
- Tryk på Timer button to set the automatic shut-off time in 1-hour increments, up to 12 hours.
- The timer indicator on the display will show the selected duration.
4.5 Fjernbetjening
Image 4.3: The included remote control allows convenient operation of all heater functions.
The remote control provides full functionality for the heater, including power, mode, temperature adjustment, flame control, and timer settings. Ensure the remote has working batteries and is pointed towards the heater's sensor.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din varmeovn.
- Rensning: Tag altid stikket ud af varmeapparatet, og lad det køle helt af, inden det rengøres. Brug en blød, tør klud.amp klud til at tørre de udvendige overflader af. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Fjernelse af støv: Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust vents.
- Opbevaring: Hvis varmeapparatet opbevares i længere tid, skal det tages ud af stikkontakten og opbevares et køligt og tørt sted, helst i originalemballagen.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Varmeapparatet tænder ikke. | No power, unit unplugged, or overheat protection activated. | Ensure the unit is securely plugged into a working outlet. If overheat protection is active, unplug the unit, wait 5-10 minutes, then plug it back in. |
| Ingen varmeafgivelse. | Heating mode not selected, or thermostat set too low. | Tryk på Mode button to select a heating level. Increase the set temperature using the remote control. |
| Flammeeffekten virker ikke. | Flame effect is turned off. | Tryk på Flamme button to activate the flame effect. |
| Fjernbetjening virker ikke. | Dead batteries, obstruction, or not pointed correctly. | Replace batteries. Ensure no obstructions between remote and heater. Point remote directly at the heater's sensor. |
| Unit display turns off after a few minutes. | Normal operation; display times out to save energy. | This is an intended feature. The heater continues to operate according to its settings. Press any button to reactivate the display. |
| Cannot adjust temperature from the unit's control panel. | Temperature adjustment is primarily via remote control. | Use the provided remote control to adjust the temperature settings. The unit's touch screen may have limited temperature control options. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Luftvalg |
| Modelnummer | DL16F |
| Strømudgang | 700W (Lav), 1500W (Høj) |
| Voltage | 120V AC |
| Justerbar termostat | 59°F - 99°F |
| Timer | 1-12 timer |
| Varmedækning | Op til 270 sq ft |
| Produktdimensioner | 32.6" D x 6.6" B x 10.6" H |
| Varens vægt | 8.7 pund |
| Særlige funktioner | Adjustable Thermostat, Flame Effect, Overheat Protection, Portable, Timer |
| Sikkerhedscertificeringer | UL Certified, V0 Flame-Retardant Materials |
8. Garanti og support
Air Choice is committed to providing quality products and customer satisfaction.
- Garanti: This product includes a 12-month replacement warranty from the date of purchase.
- Kundesupport: For any inquiries, technical support, or warranty claims, please contact Air Choice customer service. We aim to provide a quick reply within 24 hours. Lifetime after-sales service and technical support are available.
- Kontaktoplysninger: Please refer to the contact details provided on the Air Choice official webwebstedet eller din købsdokumentation.
