Laser Tree K60 60W+ Laser Cutter Module User Manual

1. Introduktion

This manual provides comprehensive instructions for the safe and effective use of the Laser Tree K60 60W+ Laser Cutter Module. Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance. Adherence to these guidelines will help prevent damage to the module and ensure user safety.

Figure 1: Laser Tree K60 60W+ Laser Cutter Module. This image shows the front view of the K60 laser module, highlighting its compact design and the integrated display for power and signal indicators.

1.1 Sikkerhedsforanstaltninger

ADVARSEL: This product contains a Class 4 laser. Direct exposure to the laser beam can cause severe eye damage and skin burns. Always wear appropriate laser safety goggles (OD6+) when operating the laser module. Never look directly into the laser beam or its reflection.

• Ensure the work area is well-ventilated to dissipate fumes and smoke generated during cutting or engraving.
• Hold brandfarlige materialer væk fra laserens bane.
• Lad ikke lasermodulet være uden opsyn under drift.
• Sørg for korrekt jordforbindelse af alt udstyr.
• Familiarize yourself with emergency shutdown procedures for your laser engraving machine.

2. Opsætning og installation

2.1 Pakkeliste

Kontroller, at alle komponenter er til stede i pakken, før du fortsætter installationen:

Figure 2: Contents of the Laser Tree K60 package. This image displays the complete set of items included with the K60 laser module, such as the module itself, input cable, driver adapter, spare protective lenses, sliding plate, adjusting screws, L-wrench, air tube, power adapter, and power cable.

• Lasermodul *1
• Input Cable *1
• Driver Adapter 2.0 *1
• Spare Protective Lens *2
• Sliding Plate *1
• Adjusting Screw M4*30 *2
• 2 mm L-nøgle *1
• Air Tube *1
• Strømadapter *1
• Strømkabel * 1

2.2 Fysisk installation

The K60 module is designed for broad compatibility with various laser engraving machines, including Z*AITU, O*Tur, Tw*Trees, S*ulpful9, Xt, and A*omst*ck models. Use the provided sliding bracket with multiple holes for installation compatibility.

• Attach the sliding plate to your existing machine's gantry or mounting bracket using appropriate screws.
• Slide the K60 laser module onto the sliding plate. The integrated dovetail guide design ensures smooth movement and stability.
• Secure the module in place using the adjusting screws.

2.3 Elektriske forbindelser

The K60 module includes an adapter board for electrical compatibility.

• Connect the input cable from the laser module to the driver adapter board.
• Connect the driver adapter board to your laser engraving machine's control board, ensuring correct pin assignments (e.g., PWM, GND, 12V/24V). Refer to your machine's manual for specific wiring diagrams.
• Connect the power adapter to the driver adapter board and then to a suitable power outlet.

3. Betjeningsvejledning

3.1 Tænd og sluk

Once installed and connected, power on your laser engraving machine. The K60 module's display will illuminate, indicating its status.

3.2 Switchable Power Mode

The K60 module offers three distinct power modes: 20W, 40W, and 60W+. This allows for optimization based on the task (engraving or cutting) and material.

Figure 3: K60 Laser Module with Switchable Power Modes. This illustration demonstrates the three selectable power outputs (20W, 40W, 60W+) and how the module's internal light changes color to indicate the selected mode.

To switch between power modes, long press the power button on the module. The display will show the current power setting (e.g., "20", "40", "60").

• 20W tilstand: Ideal for precision engraving and fine detail work.
• 40W tilstand: Suitable for balanced engraving and light cutting tasks.
• 60W+ Mode: Designed for powerful cutting, offering maximum optical power.

3.3 Engraving and Cutting Performance

The K60 module utilizes 12 high-performance fast-axis compression diodes to achieve its powerful output. The module's performance varies significantly between engraving and cutting modes, and across different power settings.

Figure 4: Comparison of Engraving and Cutting Modes. This image illustrates the difference in laser spot size and application for engraving (finer spot) versus cutting (larger, more powerful spot) with the K60 module.

For optimal results, select the appropriate power mode and adjust speed settings in your laser software (e.g., LightBurn, LaserGRBL) according to the material and desired outcome.

Figure 5: K60 Series One-Pass Cutting Depth Performance. This chart provides estimated one-pass cutting depths for various materials (Plywood, Pine Wood, MDF, Acrylic) at 20W, 40W, and 60W+ power settings, along with recommended speeds.

Typical One-Pass Cutting Depths (Power: 100%):

Note: These values are approximate and may vary based on material density, machine calibration, and environmental conditions. Always perform test cuts on scrap material to determine optimal settings.

3.4 Built-in Air Assist

The K60 module features built-in air assist, which significantly improves cutting performance by clearing debris and smoke from the laser's path. This results in cleaner cuts, reduced burn marks, and enhanced accuracy.

• Connect the provided air tube to the air assist port on the module.
• Connect the other end of the air tube to an external air pump (not included).
• Ensure the air pump provides sufficient airflow for effective debris removal.

4. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your Laser Tree K60 module.

Figur 6: Eksploderet view of the Laser Tree K60 module, highlighting key components such as the double cooling fans, working temperature display, laser view window, removable bottom shield, and quick focus lever.

4.1 Cleaning the Protective Lens

The protective lens can accumulate dust and debris, affecting laser performance. Clean it regularly using a lint-free cloth and lens cleaning solution (specifically designed for optical lenses).

• Ensure the laser module is powered off and cooled down.
• Carefully remove the removable bottom shield to access the lens.
• Gently wipe the lens. If heavily soiled, replace it with one of the provided spare protective lenses.

4.2 Fan and Heat Sink Cleaning

The dual-fan cooling design is crucial for heat dissipation and maintaining laser head stability. Periodically inspect and clean the fans and heat sinks to prevent dust buildup.

• Use compressed air to blow away dust from the fan blades and heat sink fins.
• Ensure no obstructions are blocking the airflow.

5. Fejlfinding

This section addresses common issues you might encounter with your Laser Tree K60 module.

5.1 Almindelige problemer og løsninger

• Laser affyres ikke eller har svagt output:
  • Check all electrical connections, ensuring they are secure.
  • Verify the power supply is functioning correctly and providing adequate voltage.
  • Ensure the laser module is in the correct power mode (e.g., not accidentally set to 20W for a cutting task).
  • Clean the protective lens as described in the Maintenance section.
  • Check software settings (PWM, power percentage) in your laser control program.
• Dårlig skære-/graveringskvalitet:
  • Ensure the material is properly focused. Use the quick focus lever for adjustment.
  • Verify that the air assist is connected and functioning, especially for cutting tasks.
  • Adjust speed and power settings in your software. Refer to the performance table in Section 3.3.
  • Check for any debris or damage on the laser lens.
  • Sørg for, at materialet er fladt og sikkert fastgjort.
• Overophedning:
  • Ensure the dual cooling fans are operating correctly.
  • Clean any dust or obstructions from the fans and heat sinks.
  • Operate the module within its recommended parameters.

If you encounter issues not covered here or require further assistance, please contact LASER TREE technical support.

6. Specifikationer

7. Garanti og support

7.1 Garantioplysninger

LASER TREE offers a 12-month warranty on this product. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use. Please retain your proof of purchase for warranty claims.

7.2 Teknisk support

For technical assistance, troubleshooting guidance, or any inquiries regarding your Laser Tree K60 module, please contact LASER TREE customer support. They provide comprehensive pre-sales and after-sales services.

Visit the official LASER TREE store for more information and support resources: LASER TREE Amazon Store