1. Introduction to Creality Hyper PETG Filament
Creality Hyper PETG Filament is engineered for high-performance 3D printing, combining the beneficial properties of both ABS and PLA. It offers high toughness and good mechanical strength, similar to ABS, while maintaining the ease of printing and low warpage characteristic of PLA. This filament is durable, impact-resistant, and odorless, making it suitable for a wide range of daily necessities and creative projects.
Image 1.1: A blue spool of Creality Hyper PETG filament alongside a 3D printed blue lantern, demonstrating the filament's color and application.
2. Nøglefunktioner
- Høj ydeevne: Combines high toughness and good mechanical properties with easy printing and low warpage.
- Good Layer Adhesion and Rigidity: Designed for smooth feeding, stable printing, and excellent surface finish with high precision.
- High Transparency and Light Transmission: Offers excellent transparency, high light transmission, and gloss, ideal for artistic and decorative prints.
- Dimensional Accuracy and Consistency: Features a diameter of 1.75mm with an accuracy of ±0.05mm, ensuring compatibility with most FDM 3D printers.
- Højhastighedsudskrivning: Supports printing speeds up to 600mm/s, significantly reducing print times.
- Waterproof and Sun-resistant: Exhibits excellent UV resistance, water resistance, and sun protection.
- Sturdy and Resilient: Possesses excellent impact strength and high toughness, resisting breakage upon impact.
- Good Chemical Resistance: Resistant to corrosion from various chemical substances, suitable for diverse storage environments.
Billede 2.1: En overview of Creality Hyper PETG filament's key attributes, including print speed, toughness, impact resistance, and waterproof properties.
3. Opsætning og klargøring
3.1 Udpakning og første inspektion
Upon receiving your Creality Hyper PETG filament, carefully unbox it. The filament spool is typically vacuum-sealed with a desiccant to prevent moisture absorption during transit. Inspect the spool for any visible damage or tangles before use.
3.2 Filament Drying
PETG is hygroscopic, meaning it can absorb moisture from the air. Moisture absorption can lead to printing issues such as stringing, bubbles, and reduced print quality. For optimal performance, especially if the filament has been exposed to humid air for an extended period, it is recommended to dry the filament.
- Recommended Drying Parameters: Dry at 50°C for more than 8 hours.
3.3 Ilægning af filamentet
Follow your 3D printer's specific instructions for loading filament. Ensure the filament feeds smoothly into the extruder without kinks or excessive tension.
Image 3.1: A visual guide to the dimensions of the Hyper PETG filament spool and its packaging, illustrating the product's presentation.
4. Operating Instructions (Printing Parameters)
Achieving successful prints with Creality Hyper PETG requires proper calibration of your 3D printer settings. The following are recommended starting parameters:
| Parameter | Anbefalet værdi |
|---|---|
| Filament diameter | 1.75 mm (±0.05 mm) |
| Extrusion/Nozzle Temperature | 190-260°C |
| Opvarmet seng temperatur | 45°C |
| Udskrivningshastighed | 30-600 mm/s |
| Blæserhastighed | 50 % |
These values are starting points and may need fine-tuning based on your specific 3D printer model, nozzle type, and environmental conditions. Always perform calibration prints to optimize settings for your setup.
Image 4.1: A visual representation emphasizing the high-speed printing capability of Creality Hyper PETG filament, reaching up to 600mm/s.
Image 4.2: A close-up of a 3D printer in operation, demonstrating the smooth and effortless extrusion of Hyper PETG filament, resulting in detailed prints.
5. Vedligeholdelse og opbevaring
Proper maintenance and storage are crucial for preserving the quality and performance of your Hyper PETG filament.
- Opbevaring: Store Hyper PETG filament in a sealed container or bag with a desiccant (e.g., silica gel) to protect it from moisture. An airtight environment is essential to prevent degradation.
- Miljø: Keep the filament in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting Common Printing Issues
While Hyper PETG is designed for ease of use, some common issues may arise. Here are potential causes and solutions:
- Tilstopning: Ensure your nozzle temperature is within the recommended range (190-260°C). Check for debris in the nozzle or hotend. Perform a cold pull if necessary.
- Sammenfiltring: Ensure the filament is properly wound on the spool and not allowed to unwind freely. Always secure the end of the filament when not in use.
- Bubbles/Poor Surface Finish: This often indicates moisture absorption. Refer to Section 3.2 for filament drying instructions.
- Warpage/Poor Bed Adhesion: Ensure your heated bed temperature is set to 45°C. Use an appropriate build surface adhesive (e.g., glue stick, PEI sheet) and ensure the bed is level.
- Strenger: Adjust retraction settings (distance and speed) in your slicer software. Ensure the filament is dry.
7. Specifikationer
| Specifikation | Detalje |
|---|---|
| Produktnavn | Hyper PETG |
| Produktets nettovægt | 1000g (1kg / 2.2lbs) |
| Consumable Diameter | 1.75 mm ± 0.05 |
| Recommended Printing Temperature | 190-260°C |
| Recommended Heating Bed Temperature | 45°C |
| Anbefalet udskrivningshastighed | 30-600 mm/s |
| Product Size (Spool) | 20 cm (diameter) x 6.5 cm (højde) |
| Pakkedimensioner | 8.46 x 8.31 x 2.72 tommer |
| Materiale Type | Hyper PETG |
| Producentens varenummer | HYPER PETG |
Image 7.1: A detailed table outlining the product parameters and specifications for Creality Hyper PETG filament.
8. Kompatibilitet
Creality Hyper PETG filament is designed for wide compatibility with FDM 3D printers. It works seamlessly with all common 1.75mm FDM 3D printers on the market, including Creality's fully enclosed and open 3D printers.
Image 8.1: An illustration showing Creality Hyper PETG filament being used with various 3D printer models, highlighting its broad compatibility.
Image 8.2: A banner confirming the wide compatibility of Hyper PETG with various 3D printers, including Creality's range.
9. Safety and Environmental Information
Creality Hyper PETG filament is produced with consideration for safety and environmental impact.
- Ikke-giftig: The filament is made from non-toxic bio-materials.
- Eco-Friendly Spool and Packaging: The spool and packing box are made from recycled materials, contributing to environmental sustainability.
- ROHS-kompatibel: The product adheres to RoHS standards, indicating restricted use of hazardous substances.
Image 9.1: An infographic detailing the safety and environmental features of Creality Hyper PETG, such as non-toxic materials and recycled packaging.
10. Support og garanti
For technical support, product inquiries, or warranty information, please contact Creality customer service through their official website or authorized distributors. While specific warranty details are not provided in this manual, Creality typically offers support for their products.
You can find more information and support resources on the official Creality webwebsted: qr.creality.com
