YESOUL Selvdreven Motionscykel C1EV Brugermanual

1. Introduktion

Thank you for choosing the YESOUL Self-Powered Exercise Bike C1EV. This indoor cycling fitness equipment is designed to provide an immersive and effective workout experience with its self-generating power system, integrated cooling fan, and smart app connectivity. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your exercise bike.

Figure 1: YESOUL Self-Powered Exercise Bike C1EV

2. Sikkerhedsoplysninger

Please read all instructions carefully before using the exercise bike. Keep this manual for future reference.

• Rådfør dig med din læge, før du starter et nyt træningsprogram.
• Sørg for, at alle dele er forsvarligt samlet og fastspændt før hver brug.
• Hold børn og kæledyr væk fra udstyret under drift.
• Placer cyklen på en flad, stabil overflade.
• Brug passende sportstøj og fodtøj.
• Do not insert fingers or objects into the fan blades or moving parts.
• Maksimal brugervægtkapacitet: 300 lbs.

3. Pakkens indhold

Verify that all components are present and undamaged before assembly. Refer to Figure 2 for a visual overview af delene.

Figure 2: Unboxing and Components Overview

• Hovedramme
• Forreste rør
• Bagerste rør
• Samling af styr
• Hovedrør
• Sæde
• Ventilator
• Tablet holder
• Pedalsæt (venstre/højre)
• Dekorativt omslag
• Roterende beslag
• Parts Package (screws, nuts, washers, wrenches)
• Brugermanual

4. Opsætning og montering

Follow these steps carefully for proper assembly. An installation video is available for visual guidance.

4.1. Udpakning og klargøring

1. Hold bunden af ​​kassen opad.
2. Klip tapen på kassen.
3. Tag først benrøret ud.
4. Vend kassen.
5. Hold both sides of the box with both hands, then lift the box to reveal the bike and foam packaging.
6. Klip tapen over, og fjern polyfoam-emballagen.
7. Fjern forsigtigt alt tilbehør fra polyfoamen.

4.2. Installation of Bottom Tubes (Front and Rear)

You will need: Cap nut & D8 flat spacer & Carriage bolt, Open-ended wrench 13-15#(D).

1. For the Front Tube: Unscrew the pre-installed nut. Invert the bottom tube and insert the screw from the bottom. Support the screw with your left hand.
2. Lift the main frame with your other hand and insert the front tube into the lower part of the frame.
3. Screw the nut onto the screw. Use an open-ended wrench 13-15#(D) to tighten the nut securely.
4. For the Rear Tube: Repeat the process. Unscrew the pre-installed nut. Insert the rear tube into the lower part of the frame.
5. Screw the nut onto the screw. Use an open-ended wrench 13-15#(D) to tighten the nut securely.

4.3. Installation of Seat & Seat Post

You will need: Seat Post, Seat, Open-ended wrench 13-15#(D).

1. Loosen the knob on the main frame to the left until the seat post can be inserted. Pull the knob outward and hold it.
2. Insert the seat post into the frame to your desired height. Release the knob to secure it.
3. Sæt sadlen ind mod sadelpindens huller.
4. Spænd den faste knap på sædets gliderør.
5. Spænd møtrikkerne på begge sider af sædet med gaffelnøglen 13-15#(D).
6. Brug dine hænder til at kontrollere, at sædet er sikkert fastgjort.

Figure 3: Wider Cushion for reduced pressure on hips and tailbone.

4.4. Installation of Head Tube

You will need: Head Tube.

1. First, connect the adjustment pipeline from the head tube to the bike connection line.
2. Rotate the front column tightening knob in the left direction for 4-5 turns using one hand, pull the handle out and hold it.
3. Insert the head tube into the frame, then turn the knob to the right direction to the tightest position.

4.5. Installation of Handlebar Assembly

You will need: Handlebar Assembly, Hex wrench 5#(B), D6 elastic washer 2PCS, M6-12 bolt 2PCS, M6-35 bolt 1PC.

1. Untie the fixed Line's rope from the handlebar assembly.
2. Insert the D6 elastic washers into the M6-12 nuts.
3. Use a Hex wrench size 5 (B) to pre-tighten the two M6-12 nuts on the handlebar assembly.
4. Sæt den roterende beslag i gelænderet.
5. Brug en M6-35 bolt til at fastgøre den roterende beslag.
6. Tighten each nut individually using the Hex wrench.

4.6. Installation of Fan

You will need: Fan, Hex wrench 5#(B), M6x35 hex socket flathead screw.

1. Juster ventilatoren med hullerne på den roterende beslag.
2. Insert the M6x35 hex socket flat head screw from below and tighten it with a hex wrench 5#(B).
3. Secure the wire using the attached Velcro strap.
4. Tilslut strømkablets type-C-stik til ventilatorens opladningsport.

Figure 4: Integrated fan provides cooling during workouts.

4.7. Installation of Tablet (Mobile Phone) Holder

You will need: Tablet Holder, M10 bolt 1PC, M10 jam nut 1PCS, Hex wrench 8#(A), Multi-function wrench 13-15-17-19#.

1. Sæt tablet-holderen (mobiltelefonen) ind i rillen på den roterende beslag.
2. Fastgør M10-bolten og M10-kontramøtrikken manuelt i hullerne.
3. Use hex wrench 8#(A) and multi-function wrench 13-15-17-19# to tighten the nut securely.

4.8. Installation of Pedals

You will need: Right Pedal, Left Pedal, Open-ended wrench 13-15#(D), Multi-function wrench 13-15-17-19#(C).

1. For the Right Pedal: Remove the nut pre-installed on the right pedal. Rotate the pedal clockwise into the crank. Tighten the foot pedal using an open-ended wrench 13-15#(D).
2. For the Left Pedal: Remove the nut pre-installed on the left pedal. Screw the foot pedal counter-clockwise into the crank. Tighten the foot pedal using an open-ended wrench 13-15#(D).

5. Betjeningsvejledning

Your YESOUL Exercise Bike is designed for intuitive operation. Here's how to get started and make the most of your workout.

5.1. Self-Generating Power

The bike features a self-powered system. Your pedaling motion generates electricity to power the integrated cooling fan and LED indicator lights. No external power source is required, offering flexibility in placement.

Figure 5: The bike's self-powered design generates electricity from your pedaling.

5.2. Køleventilatorens drift

The built-in fan provides a refreshing breeze during your workout. Adjust the gear level by operating the fan switch located on the fan unit. The fan has multiple speed settings to suit your preference.

5.3. Magnetic Resistance Adjustment

The bike features 100 levels of magnetic resistance for a smooth and quiet ride. Rotate the red knob located on the main frame to increase or decrease the resistance. This allows for precise control over your workout intensity, from warm-up to high-intensity interval training (HIIT).

Figure 6: Adjust resistance with the red knob for customized workouts.

5.4. App Connectivity and Features

Connect your exercise bike to the YESOUL app via Bluetooth for an enhanced training experience. The app allows you to:

• Monitor real-time workout statistics (speed, time, RPM, distance).
• Explore immersive scenic rides.
• Join live training sessions and instructor-led classes for all skill levels.
• Track your progress over time.

Figure 7: The YESOUL App provides exclusive exercise plans and data tracking.

Note: iPad/tablet for reference only, sold separately.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din motionscykels levetid og optimale ydeevne.

• Rensning: Tør cyklen af ​​med annonceamp en klud efter hver brug for at fjerne sved og støv. Undgå slibende rengøringsmidler.
• Inspektion: Kontrollér regelmæssigt alle bolte og møtrikker for at sikre, at de er stramme. Spænd dem igen om nødvendigt.
• Bæltedrev: The belt drive system is designed for low maintenance and quiet operation. No lubrication is required.
• Opbevaring: Opbevar cyklen et tørt, køligt sted væk fra direkte sollys og ekstreme temperaturer.

7. Fejlfinding

If you encounter any issues with your YESOUL Exercise Bike, refer to the following common problems and solutions:

8. Specifikationer

Detailed specifications for the YESOUL Self-Powered Exercise Bike C1EV:

9. Garanti og support

For warranty information or technical support, please refer to the warranty card included in your package or visit the official YESOUL website. You can also contact customer service through the retailer where you purchased the product.