Phoenix Gold RX212S 12-tommer enkelt 4-ohm subwoofer brugsanvisning

Indledning

This manual provides essential information for the proper installation, operation, and maintenance of your Phoenix Gold RX212S 12-inch Single 4-Ohm Subwoofer. The RX2-series subwoofers are engineered to deliver robust bass performance. They feature long-wound 2.0-inch voice coils, enabling 25mm of peak-to-peak excursion for deep, accurate bass reproduction. These subwoofers are rated at 200 watts RMS and are compatible with both vented and sealed enclosures, offering flexibility for various audio system configurations.

Sikkerhedsoplysninger

Please read all instructions carefully before installing and operating your subwoofer. Failure to follow these guidelines may result in damage to the product, vehicle, or personal injury.

• Frakobl altid bilens negative batteripol, inden du påbegynder elektrisk arbejde.
• Sørg for, at alle ledninger er korrekt isoleret og fastgjort for at forhindre kortslutninger og skader.
• Use appropriate gauge wiring for power and speaker connections as recommended by amplifier and subwoofer specifications.
• Monter subwooferen sikkert for at forhindre bevægelse under kørsel.
• Undgå at udsætte subwooferen for overdreven fugtighed eller ekstreme temperaturer.
• Længerevarende lytning ved høje lydstyrker kan forårsage høreskader.

Pakkens indhold

Kontroller, at alle varer er til stede, når du åbner pakken:

• Phoenix Gold RX212S 12-inch Subwoofer (1 unit)
• Instruktionsmanual (dette dokument)

Opsætning og installation

Proper installation is crucial for optimal performance and longevity of your subwoofer. Consider professional installation if you are unfamiliar with car audio wiring and enclosure construction.

Valg af kabinet

The RX212S subwoofer is designed for use in both sealed and vented (ported) enclosures. The choice of enclosure will affect the subwoofer's sound characteristics:

• Forseglede kabinetter: Provide tight, accurate bass response, ideal for musical clarity.
• Vented Enclosures: Offer louder, deeper bass output, often preferred for SPL (Sound Pressure Level) applications.

Consult recommended enclosure volume specifications for optimal performance. These can typically be found on the manufacturer's website or in detailed product specifications.

Ledningsforbindelser

The RX212S is a single 4-Ohm subwoofer. Connect the subwoofer to a compatible amplifier capable of delivering sufficient power (200W RMS) at a 4-Ohm load.

1. Identify the positive (+) and negative (-) terminals on the subwoofer.
2. Connect the positive (+) terminal of the subwoofer to the positive (+) speaker output terminal of your amplivligere.
3. Connect the negative (-) terminal of the subwoofer to the negative (-) speaker output terminal of your amplivligere.
4. Ensure all connections are secure and free from frayed wires that could cause short circuits.

Figur 1: Bag view of the Phoenix Gold RX212S subwoofer showing the speaker wire terminals. The red terminal indicates positive (+), and the black terminal indicates negative (-).

Figur 2: Bag view of the Phoenix Gold RX212S subwoofer, illustrating the robust basket design and terminal connections.

Figur 3: Front view of the Phoenix Gold RX212S subwoofer, showcasing keglen og omgiver.

Figur 4: eksploderede view of the Phoenix Gold RX212S subwoofer components, illustrating its internal construction.

Betjeningsvejledning

Once installed, proper tuning of your amplifier and head unit is essential for optimal sound quality and to prevent damage to the subwoofer.

• AmpIndstilling af forstærkning: Start med amplifier gain set to minimum. Gradually increase the gain until the desired volume is achieved without distortion. Do not use the gain control as a volume knob; it should be set to match the output voltage of your head unit.
• Crossover-indstillinger: Brug lavpasfilteret (LPF) på din amplifier or head unit to send only low frequencies to the subwoofer. A common starting point for the LPF is between 80 Hz and 100 Hz.
• Subsonisk filter: Hvis din ampHvis subwooferen har et subsonisk filter, skal du aktivere det og indstille det lidt under dit kabinets tuningsfrekvens (for portede kabinetter) eller omkring 25-30 Hz (for lukkede kabinetter) for at beskytte subwooferen mod at spille frekvenser, der er for lave til dens design.
• Indbrudsperiode: Allow a break-in period of approximately 10-20 hours of moderate listening before operating the subwoofer at maximum output. This allows the suspension components to loosen and perform optimally.

Opretholdelse

The Phoenix Gold RX212S subwoofer requires minimal maintenance to ensure long-term performance.

• Rensning: Use a soft, dry cloth to wipe down the cone and surround. Avoid using harsh chemicals or excessive moisture.
• Inspektion: Periodically check speaker wire connections for tightness and corrosion. Inspect the subwoofer's cone and surround for any signs of damage or wear.
• Miljøbeskyttelse: Ensure the subwoofer is protected from direct sunlight, extreme temperatures, and moisture, which can degrade materials over time.

Fejlfinding

Hvis du oplever problemer med din subwoofer, kan du se følgende almindelige fejlfindingstrin:

If these steps do not resolve the issue, contact Phoenix Gold customer support or your authorized dealer.

Specifikationer

Key technical specifications for the Phoenix Gold RX212S 12-inch Single 4-Ohm Subwoofer:

Thiele-Small Parameters (RX2 12S)

Garanti og support

The Phoenix Gold RX212S subwoofer comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Phoenix Gold webwebsted.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Phoenix Gold customer support:

• Webwebsted: www.phoenixgold.com
• Kontaktoplysninger: Refer to the Phoenix Gold webwebstedet for de mest aktuelle kontaktoplysninger, herunder telefonnumre og e-mailsupport.

Please have your model number (RX212S) and proof of purchase ready when contacting support.