1. Introduktion
This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your INGCO Cordless Circular Saw, Model B0D83PVJD2. Please read and understand all instructions before using the tool to ensure safe and effective operation.
2. Sikkerhedsinstruktioner
Følg altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade, når du bruger elværktøj.
Generelle sikkerhedsadvarsler for elværktøj
- Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af brandfarlige væsker, gasser eller støv.
- Elektrisk sikkerhed: Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
- Personlig sikkerhed: Always wear eye protection, hearing protection, and a dust mask when operating the saw. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert, watch what you are doing, and use common sense.
- Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.
- Forebyggelse af tilbageslag: Maintain a firm grip on the saw with both hands. Avoid cutting into existing walls or other blind areas where hidden objects may cause kickback.
- Klingesikkerhed: Ensure the blade is sharp and correctly installed. Never use damaged or incorrect blades.
3. Pakkens indhold
The following items are included with your INGCO Cordless Circular Saw (Model B0D83PVJD2):
- 1 x INGCO Cordless Circular Saw (Body Only)
- 1 x 140mm Saw Blade
Bemærk: Batteri og oplader sælges separat.
Image 3.1: INGCO Cordless Circular Saw with indication that battery and charger are sold separately.
4. Produktet er slutview
Familiarize yourself with the components of your circular saw before operation.
Billede 4.1: Hovedbillede view of the INGCO Cordless Circular Saw. Key components include the main handle, auxiliary handle, blade guard, depth adjustment lever, bevel adjustment lever, and dust extraction port.
Nøglekomponenter:
- Hovedhåndtag: For gripping and controlling the saw.
- Udløserkontakt: Aktiverer motoren.
- Sikkerhedslåseknap: Forhindrer utilsigtet start.
- Bladbeskytter: Trækker sig tilbage under skæring for at blotlægge bladet og dækker det, når det ikke er i brug.
- Dybdejusteringshåndtag: Allows setting the desired cutting depth.
- Skråjusteringshåndtag: Allows setting the desired cutting angle (0-45 degrees).
- Støvudsugningsport: Connects to a vacuum system for dust collection.
- Spindellåseknap: Engages to lock the spindle for blade changes.
- Børsteløs motor: Giver effektiv kraft og forlænget værktøjslevetid.
Image 4.2: Detail of the brushless motor housing and the cutting depth adjustment mechanism.
5. Opsætning
5.1 Batteriinstallation
- Ensure the saw is turned off and the safety lock is engaged.
- Juster batteripakken med batteriporten på saven.
- Skub batteripakken ind i porten, indtil den klikker sikkert på plads.
- For at fjerne batteriet skal du trykke på batteriets udløserknap og skubbe det ud.
5.2 Montering og afmontering af kniv
- Sikkerhed først: Disconnect the battery pack before changing the blade.
- Tryk og hold spindellåseknappen nede for at forhindre klingen i at rotere.
- Using the appropriate wrench (not included), loosen the arbor nut by turning it counter-clockwise.
- Fjern den ydre flange og det gamle blad.
- Clean any sawdust or debris from the arbor and flanges.
- Place the new 140mm blade onto the arbor, ensuring the rotation direction arrow on the blade matches the arrow on the saw's upper guard.
- Replace the outer flange and tighten the arbor nut clockwise with the wrench while holding the spindle lock button. Do not overtighten.
5.3 Justering af skæredybde
The cutting depth can be adjusted to match the thickness of your workpiece.
- Ensure the saw is disconnected from the power source (battery removed).
- Løsn håndtaget til dybdejustering.
- Raise or lower the saw base to achieve the desired cutting depth. The blade should extend approximately 3-6mm below the workpiece.
- Spænd dybdejusteringshåndtaget godt fast.
5.4 Justering af skråvinkel
The saw can make bevel cuts from 0 to 45 degrees.
Image 5.1: The saw demonstrating its 0-45 degree bevel cutting capability.
- Ensure the saw is disconnected from the power source (battery removed).
- Løsn skråjusteringsgrebet.
- Tilt the saw base to the desired angle (indicated on the bevel scale).
- Tighten the bevel adjustment lever firmly.
6. Betjeningsvejledning
6.1 Start og stop af saven
- To start the saw, press the safety lock-off button, then squeeze the trigger switch.
- Slip udløserkontakten for at stoppe saven.
6.2 Lav et snit
- Secure your workpiece firmly to prevent movement during cutting.
- Align the saw blade with your cutting line.
- Start the saw and allow the blade to reach full speed before contacting the workpiece.
- Før saven jævnt og stabilt gennem materialet. Tving ikke saven.
- Maintain a firm grip with both hands throughout the cut.
- Når snittet er færdigt, slippes aftrækkeren og klingen stopper helt, før saven løftes fra emnet.
6.3 Støvhåndtering
The circular saw is equipped with a dust extraction port to help manage sawdust. Connect a suitable vacuum system to this port for cleaner operation.
Image 6.1: The saw in operation, demonstrating dust extraction capability.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din rundsavs lange levetid og sikker drift.
- Rensning: After each use, clean the saw with a soft cloth to remove dust and debris. Use compressed air to clear dust from vents. Do not use solvents.
- Bladinspektion: Undersøg savklingen regelmæssigt for skarphed, revner eller manglende tænder. Udskift sløve eller beskadigede klinger med det samme.
- Batteripleje: Follow the manufacturer's instructions for charging and storing battery packs.
- Generel inspektion: Kontrollér, at alle skruer og fastgørelseselementer er spændte. Sørg for, at alle bevægelige dele fungerer problemfrit.
8. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på med din rundsav.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Saven starter ikke | Battery not charged or improperly installed; Safety lock not disengaged; Faulty switch. | Charge battery and ensure proper installation; Press safety lock-off button before trigger; Contact support if switch is faulty. |
| Dårlig skæreevne / Klingen sætter sig fast | Dull or damaged blade; Incorrect cutting depth; Forcing the saw; Workpiece not secured. | Replace blade; Adjust cutting depth; Allow saw to work at its own pace; Secure workpiece firmly. |
| Overdreven vibration | Damaged blade; Loose blade or arbor nut. | Inspect and replace blade if damaged; Ensure blade and arbor nut are securely tightened. |
9. Specifikationer
Technical data for the INGCO Cordless Circular Saw (Model B0D83PVJD2).
| Feature | Specifikation |
|---|---|
| Mærke | Ingco |
| Modelnummer | B0D83PVJD2 |
| Motortype | Børsteløs |
| Voltage | 20V |
| Hastighed uden belastning | 6300 rpm |
| Bladets diameter | 140mm (5-1/2'') |
| Arbor størrelse | 20 mm |
| Maks. skæredybde (90°) | 50 mm |
| Maks. skæredybde (45°) | 33 mm |
| Justerbar skråvinkel | 0-45° |
| Produktdimensioner | 29.9L x 17.5W x 27.3H Centimeter |
| Varens vægt | 0.21 Kilograms (Tool body only) |
| Inkluderede komponenter | 1 Pcs 140mm blade |
10. Garanti og support
INGCO products undergo strict quality inspection. For any service inquiries or support, please refer to the contact information below.
- Online support: 7*24 online support service is available.
- Producentkontakt: +91 95605 23925
- Garanti: This product typically comes with a 6-month warranty. Please retain your purchase receipt for warranty claims.
