Amplicomms BigTel 48 Plus AmpLificeret ledningstelefonbrugervejledning

Indledning

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Amplicomms BigTel 48 Plus amplified corded telephone. Designed for ease of use, this phone features large buttons, a clear display, and enhanced audio capabilities to assist users with hearing or vision impairments.

Nøglefunktioner omfatter:

• Easy to Use Big Button Amplified Telefon
• Large and Clear Display
• Audio Boost for Extra Loud Handset Volume
• Kompatibel med høreapparater

Pakkens indhold

Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:

• Amplicomms BigTel 48 Plus Telephone Base
• Håndsæt
• Håndsætledning
• Telefonledning
• Strømadapter
• Brugervejledning (dette dokument)

Billede: Den Amplicomms BigTel 48 Plus telephone base, handset, coiled handset cord, straight telephone line cord, and power adapter are shown, illustrating the complete package contents.

Opsætning

Follow these steps to set up your Amplicomms BigTel 48 Plus telephone.

1. Tilslutning af håndsættet

1. Find den spiralformede ledning til håndsættet.
2. Plug one end of the coiled cord into the jack on the side of the telephone base, typically marked with a handset icon.
3. Plug the other end of the coiled cord into the jack on the bottom of the handset. Ensure both connections are secure.

2. Tilslutning til telefonlinjen

1. Locate the straight telephone line cord.
2. Plug one end of the telephone line cord into the jack on the back of the telephone base, usually marked with a wall jack icon or "LINE".
3. Sæt den anden ende af telefonledningen i dit telefonstik i væggen.

3. Strømtilslutning

1. Connect the small end of the power adapter cable into the DC IN jack on the back of the telephone base.
2. Plug the larger end of the power adapter into a standard electrical outlet.
3. The phone display should illuminate, indicating it is receiving power.

Billede: Den Amplicomms BigTel 48 Plus phone, showcasing its large buttons, clear display, and overall design, ready for operation after setup.

Betjeningsvejledning

This section details the basic functions and features of your telephone.

Foretag et opkald

1. Løft håndsættet fra holderen.
2. Lyt efter en klartone.
3. Ring det ønskede telefonnummer op ved hjælp af det store numeriske tastatur.
4. Vent på, at opkaldet forbindes.
5. For at afslutte opkaldet skal du lægge håndsættet tilbage i holderen.

Modtagelse af et opkald

1. When the phone rings, lift the handset from the cradle to answer the call.
2. For at afslutte opkaldet skal du lægge håndsættet tilbage i holderen.

Adjusting Volume and Audio Boost

De Amplicomms BigTel 48 Plus features an "Audio Boost" function for extra loud handset volume, ideal for users with hearing difficulties. The phone also has a loud ringer.

• Håndsæts lydstyrke: During a call, use the volume control buttons (often marked with arrows or +/-) on the side or front of the phone to adjust the handset listening volume.
• Lydboost: Press the dedicated "Audio Boost" button (often marked with a speaker icon and a plus sign, or "AUDIO BOOST" on the display) to activate maximum amplification. The display will show "AUDIO BOOST" when active.
• Ringelydstyrke: Adjust the ringer volume using the switch or button usually located on the side or back of the phone. The ringer can reach up to 90 dB.

Billede: En detaljeret view of the phone's keypad and display, highlighting the "AUDIO BOOST" indicator, the M1 and M2 speed dial buttons, and visual cues for +40dB amplification and 90dB ringer volume.

Speed Dial (M1/M2 Buttons)

The M1 and M2 buttons allow you to store and quickly dial frequently used numbers.

Programming Speed Dial Numbers:

1. Løft håndsættet.
2. Tryk på BUTIK button (if available, or refer to specific manual for programming sequence).
3. Ring til det telefonnummer, du vil gemme.
4. Tryk på M1 or M2 button to assign the number to that memory key.
5. Place the handset back into the cradle.

Brug af hurtigopkald:

1. Løft håndsættet.
2. Tryk på M1 or M2 button. The stored number will be dialed automatically.

Genopkaldsfunktion

Sådan genopkalder du det sidst opkaldte nummer:

1. Løft håndsættet.
2. Tryk på GENTAGELSE button (often marked with an 'R' or a curved arrow). The last dialed number will be automatically redialed.

Mute-funktion

Under et opkald skal du trykke på STUM button (if available) to temporarily disable your microphone, allowing you to speak privately without the other party hearing you. Press it again to unmute.

Høreapparatkompatibilitet

De Amplicomms BigTel 48 Plus is designed to be compatible with hearing aids. If you use a hearing aid with a T-coil (telecoil) setting, switch your hearing aid to the "T" or "MT" position for an optimized listening experience, reducing background noise and feedback.

Opretholdelse

Proper care and maintenance will ensure the longevity of your telephone.

• Rensning: Brug en blød, damp cloth to clean the telephone's surface. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
• Væskeeksponering: Keep the telephone away from water and other liquids. If the phone comes into contact with liquid, immediately unplug it from the wall jack and power outlet.
• Opbevaring: Opbevar telefonen et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Snore: Periodically check all cords for damage or fraying. Replace any damaged cords immediately.

Fejlfinding

If you experience issues with your telephone, please refer to the following table for common problems and their solutions.

Specifikationer

Detaljerede tekniske specifikationer for Amplicomms BigTel 48 Plus telephone:

• Modelnummer: Amplicomms BigTel 48
• Farve: Sort
• Telefontype: ledning
• Strømkilde: Battery Powered (with included power adapter for full functionality)
• Type svarsystem: Digital
• Kompatible enheder: Hearing Aids, Standard Telephone Lines, Devices with Handsfree Mode
• Multiline drift: Flerlinjedrift
• Telefonens standbytid: 99 timer
• Opkaldsidentifikation: Ingen
• Varens vægt: 2.07 pund
• Pakkedimensioner: 9.13 x 8.35 x 3.03 tommer
• Fabrikant: Amplicomms
• Dato først tilgængelig: 8. januar 2024

Garanti og support

Dine Amplicomms BigTel 48 Plus telephone is covered by a manufacturer's warranty. Please refer to the warranty card included in your original packaging for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Amplicomms customer service. Contact information can typically be found on the manufacturer's official webwebstedet eller på produktemballagen.

It is recommended to have your product model number (Amplicomms BigTel 48) and purchase date ready when contacting support.