1. Introduktion
Thank you for choosing darkFlash G24 120MM Magnetic ARGB PC Case Fans. This manual provides detailed instructions for the installation, operation, and maintenance of your new PC cooling fans. These fans are designed for efficient heat dissipation and customizable lighting, featuring a tool-free magnetic installation system.
Image: darkFlash G24 120MM Magnetic ARGB PC Case Fans. This image displays the white magnetic ARGB fans, highlighting their design and the magnetic connection capability.
2. Pakkens indhold
Kontroller venligst, at alle nedenstående komponenter er inkluderet i din pakke:
- 3 x darkFlash G24 Magnetic Fans
- 1 x 3-Pin 5V ARGB / 4-Pin PWM Cable
- 1 x Series-Connection Extension Magnetic Cable
- 12 x monteringsskruer
Image: darkFlash G24 Fan Package Contents. This image shows the three magnetic fans, the included cables (3-pin ARGB/4-pin PWM, and extension magnetic cable), and the mounting screws.
3. Opsætning og installation
The darkFlash G24 fans feature a tool-free magnetic mounting system for simplified installation.
3.1 Magnetisk forbindelse
The fans connect to each other magnetically, reducing the number of cables required. Simply align the magnetic edges of the fans and they will snap together. This allows for a clean and efficient setup.
Image: Magnetic Fan Connection. This image illustrates how the fans connect magnetically, reducing the need for multiple wire connections between individual fans.
3.2 Kabelforbindelser
Connect the provided 3-Pin 5V ARGB / 4-Pin PWM cable to the last fan in your magnetic chain. This single cable will power and control all connected fans.
- 4-Pin PWM Cable: Connect this to your motherboard's 4-pin fan header for fan speed control based on system temperature.
- 3-Pin 5V ARGB Cable: Connect this to your motherboard's 3-pin 5V Addressable RGB header for lighting synchronization and control. Ensure it is a 5V ARGB header, not a 12V RGB header, to prevent damage.
Use the Series-Connection Extension Magnetic Cable if you need to extend the reach or connect fans in a non-linear configuration.
Image: Simplified Cable Handling. This image shows the 4-pin PWM cable and the 3-pin 5V ARGB cable, which are used for power, speed control, and lighting synchronization.
4. Betjeningsvejledning
4.1 ARGB-lysstyring
The darkFlash G24 fans feature customizable ARGB lighting. To control the lighting effects, connect the 3-Pin 5V ARGB cable to a compatible motherboard header. The lighting can then be synchronized and controlled using your motherboard's RGB software, such as:
- ASUS Aura Sync
- GIGABYTE RGB Fusion 2.0
- MSI Mystic Light Sync
- ASRock Polychrome RGB
Refer to your motherboard's manual for specific instructions on using its ARGB control software.
Image: ARGB Compatibility. This image highlights the compatibility of the fans' ARGB lighting with various motherboard RGB synchronization software, including ASUS Aura Sync, GIGABYTE RGB Fusion 2.0, MSI Mystic Light Sync, and ASRock Polychrome RGB.
4.2 PWM Fan Speed Control
The 4-Pin PWM connection allows your motherboard to automatically adjust the fan speed based on the system's temperature. This ensures optimal cooling performance while minimizing noise when the system is under light load. You can typically configure fan curves within your motherboard's BIOS/UEFI settings or through dedicated software provided by your motherboard manufacturer.
5. Vedligeholdelse
Regular maintenance helps ensure the longevity and optimal performance of your darkFlash G24 fans.
- Fjernelse af støv: Periodically clean the fan blades and frame to remove accumulated dust. Use compressed air or a soft brush. Ensure the fan is powered off before cleaning.
- Lejepleje: The fans utilize a quality hydro bearing designed for long life and quiet operation. No lubrication is required. Avoid applying excessive force or pressure to the fan blades.
6. Fejlfinding
Ventilatoren drejer ikke:
- Ensure the 4-Pin PWM cable is securely connected to the motherboard fan header.
- Check BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- Verify that the power supply is providing adequate power to the motherboard.
ARGB-belysning virker ikke:
- Confirm the 3-Pin 5V ARGB cable is correctly connected to a 5V Addressable RGB header on your motherboard (not a 12V RGB header).
- Ensure your motherboard's RGB software is installed and updated.
- Check the software settings to ensure ARGB control is enabled for the connected header.
Overdreven støj:
- Sørg for, at ingen kabler eller forhindringer rammer ventilatorbladene.
- Check if the fans are securely mounted and not vibrating against the PC case.
- Verify fan speed settings in BIOS/UEFI or software; high RPMs will naturally produce more noise.
7. Specifikationer
Detailed specifications for the darkFlash G24 120MM Magnetic ARGB PC Case Fans:
| Feature | Specifikation |
|---|---|
| Produktdimensioner | 120 mm x 120 mm x 25 mm (4.72" L x 4.72" B x 0.98" H) |
| Mærke | mørkFlash |
| Strømstik type | 4-Pin PWM |
| Voltage | 5 Volts (ARGB), 12 Volts (Fan Motor) |
| Wattage | 1.8 watt |
| Afkølingsmetode | Luft |
| Kompatible enheder | Desktop pc'er |
| Støjniveau | 33.55 dB (Maksimum) |
| Materiale | Rubber (Damping Pads) |
| Maksimal rotationshastighed | 2200 RPM |
| Luftstrøm | Op til 53 CFM |
| Statisk tryk | Up to 1.96 MMH2O |
Image: darkFlash G24 Fan Performance Specifications. This image visually represents the fan's key performance metrics including fan speed (up to 2200 RPM), air capacity (up to 52.96 CFM), and fan pressure (up to 1.96 MMH2O).
Image: darkFlash G24 Fan Noise Level. This image provides a graph illustrating the low noise operation of the darkFlash magnetic fan, indicating a typical noise level of 33dB compared to other sound sources.
8. Garanti og support
For garantioplysninger og teknisk support henvises til den officielle darkFlash-version. webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
For further assistance, you may visit the darkFlash store on Amazon: darkFlash-butik
