LAUNCH X431 PRO3S+ Elite Bidirectional Scan Tool User Manual

Indledning

The LAUNCH X431 PRO3S+ Elite is a professional all-in-one bidirectional scan tool designed for comprehensive vehicle diagnostics, testing, and maintenance. Featuring advanced capabilities such as J2534 protocol support, intelligent topology mapping, and over 60 service functions, this scanner provides efficient and accurate solutions for automotive technicians and enthusiasts. It supports a wide range of vehicle makes and models, ensuring extensive compatibility for various diagnostic needs.

Figure 1: The LAUNCH X431 PRO3S+ Elite scan tool, including the main tablet, SmartLinkC V2.0 interface, and various diagnostic adapters, all housed within a durable carrying case.

Opsætning

Unboxing og indledende opsætning

Upon receiving your LAUNCH X431 PRO3S+ Elite, carefully unbox all components and verify against the packing list. The main package includes the X431 PRO3S+ ELITE Display Tablet, SmartLink C V2.0, and a durable carrying case. Additional accessories such as various connectors, cables, and power adapters are also included to ensure broad compatibility and functionality.

The package contents are as follows:

• X431 PRO3S+ ELITE Display Tablet (1)
• SmartLink C V2.0 (1)
• Bæretaske (1)
• HD15F to OBDII 16 Connector (1)
• DB15F to HD15F Cable (1)
• UK/EU/US Plug (1 each)
• Network Cable (1)
• Type A - Type B USB Cable (1)
• Type A - Type C USB Cable (1)
• Brugervejledning (1)
• PIN envelope (1)
• Hurtig startguide (1)
• Specific Adapters: BENZ-38, BMW-20, HONDA-3, TOYOTA-17, GM/VAZ-12, TOYOTA-22, CHRYSLER-6, KIA-20, BENZ-14, FORD 6+1, NISSAN14+16
• Cigarette lighter cable (1)
• MITSUBISHI/HYUNI-12+16 (1)
• Power cable clips (1)
• FUSE (various)

J2534 Driver Installation

To utilize the J2534 PassThru capabilities of the SmartLinkC, drivers must be installed on your PC. This allows the SmartLinkC to work with OEM diagnostic software for advanced programming and diagnostics.

Follow these general steps for driver installation:

1. Besøg den officielle LANCERING website (en.cnlaunch.com).
2. Navigate to the "Products" section and locate the X-431 PAD V LINK (or relevant model) product page.
3. Find the "Download" tab or section on the product page.
4. Download the J2534 driver file (often a .rar or .zip archive).
5. Brug en file extraction tool (like BreeZip or 7-Zip) to open the downloaded archive.
6. Run the `Launch J2534.exe` installer and follow the on-screen prompts to complete the installation.
7. Once installed, connect the SmartLinkC to your PC via USB and to the vehicle's OBD-II port.
8. Open the MDI Manager Launch J2534 application (or similar) to verify connection and check for firmware updates.

Tilslutning til køretøj

Connect the SmartLinkC V2.0 interface to your vehicle's OBD-II diagnostic port, typically located under the dashboard on the driver's side. Ensure a secure connection. The SmartLinkC communicates wirelessly with the X431 PRO3S+ Elite tablet via Bluetooth, providing flexibility during diagnostics.

Figur 2: Bagside view of the LAUNCH X431 PRO3S+ Elite tablet showing its kickstand, alongside the SmartLinkC V2.0 interface, which connects to the vehicle.

Drift

Systemet er slutview

The X431 PRO3S+ Elite operates on Android 10.0 with a 4-Core 2.0 GHz processor, ensuring smooth and fast operation. It features a 10.1-inch touchscreen display, 4GB RAM, 64GB storage, and an 8MP camera. The device supports 2.4GHz/5GHz Wi-Fi for stable connectivity and offers a 6300mAh/7.6V battery for extended use.

Key Diagnostic Functions

Intelligent Topology Map

This feature provides a comprehensive visualization of all vehicle systems, displaying control units in different colors to indicate their status (normal, abnormal, scanned, not scanned, not equipped). This intuitive mapping helps in swift diagnosis and high-level repairs by clearly showing system connections and scan results.

Figure 3: The Topology Module Mapping interface, illustrating the interconnectedness of various vehicle control units and their diagnostic status.

Bi-directional Control (Active Test)

Perform active tests to send command signals from the scanner to various module actuators. This allows you to test component integrity and functionality directly, such as activating cooling fans, testing temperature sensors, or checking acceleration devices, to quickly determine if a component needs replacement or repair.

Figure 4: Visual representation of various bi-directional control tests that can be performed with the scan tool to diagnose component functionality.

60+ Hot Service Functions

The tool offers over 60 special service functions for common vehicle maintenance and repairs. These include, but are not limited to, Oil Reset, ABS (Anti-lock Braking System) Brake Bleed, EPB (Electronic Parking Brake) Reset, SAS (Steering Angle Sensor) Calibration, BMS (Battery Management System) Reset, Suspension Reset, Injector Coding, Power Balance, Turbo Calibration, VGT (Variable Geometry Turbocharger), Transmission Adaptation, and Throttle Adaptation.

Figure 5: A selection of the over 60 hot service functions available on the device for routine maintenance and specialized repairs.

J2534 Protocol & ECU Coding

The SmartLinkC V2.0 supports the J2534 protocol, allowing it to function as a PassThru device for ECU reprogramming. This enables technicians to program new blank ECUs, renew ECU data, upgrade ECU software versions, and repair ECU parameter loss. ECU coding functions allow for component matching, customizing OE settings, disabling certain functions, activating advanced features, and enhancing vehicle comfort.

Figur 6: En overview of the J2534 protocol and ECU coding features, highlighting their role in fixing complex car issues and activating high-end functions.

Omfattende køretøjsdækning

The LAUNCH X431 PRO3S+ Elite provides 99.99% coverage of global vehicles from 1974-2024, supporting over 200 brands. It includes support for CANFD/DoIP/D-PDU/CAN 2.0 protocols and FCA AutoAuth, ensuring compatibility with the latest vehicle technologies across American, European, Asian, and other regional markets.

Figure 7: A visual representation of the extensive global vehicle coverage offered by the scan tool, including various protocols and brands.

Opretholdelse

Softwareopdateringer

The device comes with 2 years of free software updates. Regular updates ensure access to the latest vehicle models, diagnostic functions, and bug fixes. Connect the tablet to a stable Wi-Fi network and navigate to the "Software Update" section on the main menu to download and install available updates.

Batteripleje

The X431 PRO3S+ Elite is equipped with a 6300mAh/7.6V battery. To prolong battery life, avoid extreme temperatures, fully charge the device before first use, and store it with a partial charge if not used for extended periods.

Rengøring og opbevaring

Keep the tablet and SmartLinkC clean by wiping with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Store all components in the provided carrying case in a dry, cool environment to protect them from dust, moisture, and physical damage.

Fejlfinding

Fælles problemer og løsninger

• Registreringsproblemer: If prompted that the product has already been registered during initial setup, contact LAUNCH customer service for assistance. This may occur due to re-sampling inspections before shipment.
• Forbindelsesproblemer: Ensure the SmartLinkC is securely connected to the vehicle's OBD-II port and that the tablet's Bluetooth and Wi-Fi are enabled. Check for any physical damage to cables or connectors.
• Software glitches: Perform a software update to resolve minor bugs. If issues persist, consider a factory reset (backup data first) or contact technical support.
• Enheden tænder ikke: Ensure the battery is charged. If using external power, verify the power source and cable are functioning correctly.

Specifikationer

Garanti og support

The LAUNCH X431 PRO3S+ Elite comes with 2 years of free software updates, ensuring your device remains current with the latest vehicle technologies and diagnostic capabilities. LAUNCH provides 100% service support for its products.

• Kundeservice: For any product-related inquiries, technical assistance, or issues such as product registration, please contact LAUNCH customer service.
• Returpolitik: A 90-day return and replacement policy is available.

For detailed support, refer to the official LAUNCH webwebstedet eller kontaktoplysningerne i din brugermanual.