DRIKLUX Automatisk Uroptrækker Brugermanual

1. Introduktion

Thank you for choosing the DRIKLUX Automatic Watch Winder. This device is designed to keep your automatic watches wound and ready to wear, preventing them from stopping and requiring manual resetting. Featuring a super quiet Japanese motor, LED lighting, and a five-speed control mode, this winder offers reliable and convenient watch maintenance.

2. Produktet er slutview

The DRIKLUX Watch Winder combines functional design with quiet operation to ensure your automatic watches are always in optimal condition. Its compact size and elegant appearance make it suitable for any setting.

Nøglefunktioner:

• Modedesign: Fine sand spraying technology with a transparent acrylic glass cover for a comfortable touch and aesthetic appeal.
• Super stille drift: Equipped with a Japanese motor and internal gearbox for extremely quiet performance.
• Rotational Mode Setting: Supports a specific winding cycle to keep watches running.
• Selective Driving Mode: Can be powered by an AC adapter or 2 AA batteries.
• LED lyseffekt: Enhances the display of your watch.

3. Pakkens indhold

• 1 x DRIKLUX Automatic Watch Winder
• 1 x AC Power Adapter (located at the bottom of the brown corrugated box)
• 1 x Brugermanual (dette dokument)

4. Opsætningsvejledning

4.1 Strømtilslutning

The watch winder can be powered by either the included AC adapter or 2 AA batteries (not included).

1. Brug af AC-adapter: Connect the AC adapter to the power input port on the back of the winder and plug it into a standard wall outlet (100-240V, 50/60HZ, 0.3A). Ensure batteries are removed if using AC power.
2. Brug af batterier: Open the battery compartment on the back of the winder and insert 2 AA batteries, observing correct polarity. Disconnect the AC adapter if using battery power.

4.2 Placing Your Watch

1. Gently open the transparent acrylic cover.
2. Place your automatic watch onto the watch pillow. The watch pillow circumference is suitable for watches with a circumference of 6.7 to 7.7 inches.
3. Ensure the watch is securely seated on the pillow and the pillow is correctly positioned within the winder's rotating mechanism.
4. Close the transparent acrylic cover.

5. Driftstilstande

The DRIKLUX Watch Winder features a five-speed control mode, which includes a specific rotational pattern designed to keep your automatic watch wound.

Rotational Cycle:

• The winder operates in a bi-directional, intermittent pause cycle.
• It turns clockwise for approximately 2 minutes.
• It then rests for 6 minutes.
• After the rest period, it resumes turning counterclockwise for 2 minutes.
• Finally, it pauses again for 6 minutes before repeating the cycle.

This cycle ensures your watch remains wound without being overwound.

LED lyseffekt:

The winder includes an LED lighting effect to illuminate your watch. Use the dedicated switch on the back panel to turn the LED light on or off according to your preference.

6. Vedligeholdelse

6.1 Rengøring:

• Wipe the exterior of the winder with a soft, dry cloth.
• Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige finishen.
• For the acrylic cover, use a soft, damp cloth and dry immediately to prevent water spots.

6.2 Generel pleje:

• Keep the winder away from direct sunlight, extreme temperatures, and high humidity.
• Ensure the winder is placed on a stable, flat surface.
• Bloker ikke ventilationsåbningerne.

7. Fejlfinding

Watch is not turning:

• Tjek strøm: Ensure the AC adapter is securely plugged in, or if using batteries, verify they are correctly inserted and not depleted.
• Resting Time: The winder operates with intermittent pauses. If you observe it not turning, it might be in its 6-minute resting period. Wait a few minutes to see if the rotation resumes.
• Kontakter: Confirm that the power switch on the back of the unit is in the 'ON' position.

Usædvanlig støj:

• While the winder is designed to be super quiet, a faint motor sound may be audible in very quiet environments. If the noise is excessive or grinding, contact customer support.

8. Specifikationer

9. Garanti og support

9.1 garanti:

The DRIKLUX Automatic Watch Winder comes with a 1 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og problemer, der opstår ved normal brug. Gem venligst din købsbevis til garantikrav.

9.2 Kundesupport:

If you encounter any problems with your product or have questions not covered in this manual, please do not hesitate to contact our customer support team. We are committed to providing assistance and will respond to your inquiries within 24 hours.

E-mail: support@driklux.com (Eksample email, please replace with actual support email if available)