ANGEWOZ R050_MKLSL_IYZC01C_7B

Brugermanual: Udskiftning af nøglefjernbetjening med 7 knapper

Model: R050_MKLSL_IYZC01C_7B | Brand: ANGEWOZ

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ANGEWOZ 7-Button Key Fob Replacement. Designed for specific Chrysler and Dodge vehicles, this key fob offers reliable keyless entry and remote control functionalities, mirroring the original equipment.

Two ANGEWOZ 7-button key fobs with integrated keys, showing the front and side profiles.

Image: Two ANGEWOZ 7-button key fobs, each with a retractable key blade, displayed side-by-side. The fobs are black with red 'PANIC' buttons and white icons for lock, unlock, remote start, and power sliding doors.

Kompatibilitet

This key fob replacement is specifically designed for the following vehicle models and years. Please verify your vehicle's make, model, and year to ensure compatibility before proceeding with installation.

Important Note: This key fob is NOT compatible with vehicles equipped with KeylessGO / Proximity / Push Button Ignition systems. It is designed for vehicles that use a traditional key ignition.

Compatibility chart showing Chrysler Town & Country 2008-2016 and Dodge Grand Caravan 2008-2020, with a key fob in the foreground.

Image: A graphic illustrating vehicle compatibility for the key fob. It shows a Chrysler Town & Country (2008-2016) and a Dodge Grand Caravan (2008-2020) with a key fob in the foreground. A note states: "Only factory Original features will work. This kit will not add new functions to your vehicle."

Comparison showing a traditional key ignition (green check) versus a push-button start (red X).

Image: A visual comparison indicating the type of ignition system the key fob is compatible with. On the left, a green checkmark is over a traditional key ignition slot. On the right, a red 'X' is over a 'ENGINE START STOP' push button, emphasizing that the product is not for push-button start vehicles.

Funktioner

The ANGEWOZ 7-Button Key Fob Replacement provides the following functions:

Each key fob comes complete with a pre-installed CR2032 battery and has been pre-tested for quality and functionality.

Opsætning og programmering

This key fob requires programming to your vehicle. While some vehicles may support self-programming, it is often recommended to have the key fob programmed by a professional locksmith or dealership to ensure proper functionality and security.

General Programming Information:

The FCC ID for this key fob is IYZ-C01C / M3N5WY783X. This information may be required during the programming process.

Key fob with key blade detached, showing FCC ID: IYZ-C01C M3N5WY783X.

Image: The 7-button key fob with its integrated key blade detached, resting on a blue surface. The image highlights the FCC ID: IYZ-C01C M3N5WY783X, which is crucial for identification and programming.

Betjeningsvejledning

Once programmed, your key fob will function similarly to your original remote. Here's how to use its primary features:

Ensure you are within range of your vehicle for the remote functions to operate effectively. Obstructions or interference may reduce range.

Hand holding key fob, demonstrating remote function with a car in the background.

Image: A hand holding the 7-button key fob, pointing towards a silver SUV in the background. Yellow circles emanate from the key fob, visually representing the remote signal, indicating that the key fob performs the same functions as the vehicle's original equipment.

Opretholdelse

Udskiftning af batteri:

The key fob is powered by one CR2032 coin cell battery. If the remote's range decreases significantly or it stops responding, the battery may need replacement.

  1. Locate the small notch or slot on the side or bottom of the key fob casing.
  2. Lirk forsigtigt c'en opasing using a small flat-head screwdriver or a plastic pry tool.
  3. Note the orientation of the existing CR2032 battery (positive (+) side up or down).
  4. Remove the old battery and insert a new CR2032 battery, ensuring the correct orientation.
  5. Snap the key fob casing back together until it is securely closed.

Pleje og håndtering:

Fejlfinding

ProblemMulig årsagLøsning
Key fob not responding.Dead or low battery. Key fob not programmed. Out of range. Interference.Replace battery. Ensure proper programming (see Setup section). Move closer to vehicle. Move away from sources of strong radio interference.
Reduceret rækkevidde.Low battery. Environmental interference.Replace battery. Try operating in a different location away from large metal objects or strong radio signals.
Key fob works intermittently.Loose battery connection. Damaged internal components.Check battery seating. If problem persists, contact customer support.
Key blade does not fit ignition/door.Key blade not cut or incorrectly cut.Have the key blade professionally cut by a locksmith.

Specifikationer

Garanti og support

ANGEWOZ is committed to providing premium quality products and excellent customer service. Your purchase is backed by our commitment to your satisfaction.

Kundesupport:

If you encounter any issues with your key fob replacement or have questions regarding its functionality, programming, or compatibility, please do not hesitate to contact us. Our technical support team is available 24/7 to assist you and provide the best possible solution within 24 hours.

Please refer to your purchase documentation or the seller's contact information on the platform where you purchased the product for specific contact methods.

Relaterede dokumenter - R050_MKLSL_IYZC01C_7B

Preview ANGEWOZ Nøglebrik og Programmør Brugervejledning til Dodge, Jeep, Chrysler
En omfattende brugervejledning til ANGEWOZ-nøglefjernbetjeningen og programmeringsenheden, der indeholder instruktioner til udskiftning af fjernbetjening på Dodge-, Jeep- og Chrysler-køretøjer. Indeholder ofte stillede spørgsmål og programmeringstrin.
Preview ANGEWOZ brugervejledning til nøglefobprogrammering til Chevrolet, Buick, GMC, Cadillac, Pontiac, Saturn, Suzuki
This user guide provides step-by-step instructions for using the ANGEWOZ key fob programmer to program replacement remotes for select Chevrolet, Buick, GMC, Cadillac, Pontiac, Saturn, and Suzuki vehicles. It includes important notes, programming steps, and frequently asked questions about the device.