Juno 2-tommer fladkantet LED-downlight uden kanyle, brugsanvisning

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Juno 2-Inch Flat Trim Canless Wafer LED Downlight. This innovative lighting solution is designed for quick and easy installation in various ceiling spaces, eliminating the need for traditional recessed housings. It features an all-in-one design with switchable white color temperature and adjustable lumen output, offering versatile lighting for accent, task, or general illumination.

Figure 1: Juno 2-Inch Flat Trim Canless Wafer LED Downlight with its remote driver box.

2. Sikkerhedsoplysninger

Læs alle instruktioner omhyggeligt inden installation, og gem denne manual til senere brug. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller andre farer.

• Sluk altid for strømmen ved afbryderen, før du påbegynder installation eller udfører vedligeholdelse.
• All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
• Undlad at modificere eller ændre produktet på nogen måde.
• Sørg for, at forsyningen voltage er kompatibel med armaturet (120 volt).
• This product is suitable for wet locations and is IC Rated for direct contact with insulation.
• Do not install damaged products. Inspect the product upon receipt.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter installationen:

• LED Lens (Integrated with Downlight Fixture)
• Mounting Hardware (Spring clips, remote driver box)

Note: The downlight fixture and remote driver box are typically pre-assembled or connected.

4. Funktioner

The Juno 2-Inch Flat Trim Canless Wafer LED Downlight offers advanced features for optimal lighting performance and ease of use:

• Dåsefrit design: No housing required, allowing installation directly into ceiling drywall.
• Switchable White Color Temperature (SWW5): Easily select from five color temperature options:
  • 2700K blød hvid
  • 3000K varm hvid
  • 3500K Neutral Hvid
  • 4000K Cool White
  • 5000K dagslys
• Adjustable Lumen Output (ALO25): Choose from three brightness levels (Low, Medium, High) to suit your needs.
• Dæmpbar: Compatible with most standard TRIAC dimmers, dimming down to 10 percent.
• Energieffektiv: Long-life LEDs and a high-efficiency driver ensure superior illumination and extended service life.
• IC vurderet: Approved for direct contact with insulation, simplifying installation in insulated ceilings.
• Wet Location Certified: Suitable for use in bathrooms, showers, and outdoor covered areas.

Figure 2: Switches on the remote driver box allow selection of color temperature and lumen output.

Figure 3: Visual guide to the different color temperatures available.

5. Opsætning og installation

The canless design simplifies installation. Follow these steps for a secure and proper setup:

1. Sluk for strømmen: Before starting, ensure the power to the installation area is turned off at the circuit breaker.
2. Forbered åbning: Cut a 2-inch diameter hole in the ceiling drywall at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the ceiling space.
3. Tilslut ledninger:
   • Open the remote driver box.
   • Connect the building's supply wires (hot, neutral, ground) to the corresponding wires in the driver box using appropriate wire connectors.
   • Sørg for, at alle forbindelser er sikre og korrekt isolerede.
   • Close the driver box cover.
   

   Figure 4: The remote driver box houses the electrical connections and adjustment switches.

4. Select Settings (Pre-Installation): Before inserting the downlight into the ceiling, use the switches on the remote driver box to select your desired color temperature (2700K-5000K) and lumen output (Low, Medium, High). These settings can be adjusted later if needed, but it's easier before final installation.
5. Insert Driver Box: Place the remote driver box into the ceiling opening. Its slim design allows it to fit into tight spaces.
6. Installer downlight:
   • Gently push the spring-loaded clips on the sides of the downlight upwards.
   • Insert the downlight into the ceiling opening.
   • Once the downlight is fully inserted, release the clips. The clips will spring back down and firmly secure the fixture against the ceiling.
   

   Figure 5: Dimensions of the downlight and driver box for installation planning.
7. Gendan strøm: Turn the power back on at the circuit breaker. Test the downlight's functionality.

6. Betjeningsvejledning

Your Juno LED Downlight is designed for simple operation once installed.

• Tænd/sluk: Control the light using a standard wall switch connected to the circuit.
• Dæmpning: If connected to a compatible TRIAC dimmer switch, adjust the brightness by manipulating the dimmer control. The light can be dimmed down to 10% of its maximum output.
• Adjusting Color Temperature and Lumen Output:

  The color temperature and lumen output are set via switches located on the remote driver box (refer to Figure 2). To change these settings after installation, you will need to access the driver box, which may require temporarily removing the fixture from the ceiling or accessing the box through an attic/access panel if it was placed there. It is recommended to set these preferences during installation.

  • Farvetemperaturkontakt: Select from 2700K, 3000K, 3500K, 4000K, or 5000K.
  • Lumen Output Switch: Choose Low, Medium, or High brightness.

7. Vedligeholdelse

The Juno LED Downlight requires minimal maintenance due to its durable design and long-life LEDs.

• Rensning: Sørg for, at strømmen er slukket, inden rengøring. Tør armaturet af med en blød, tør eller let fugtet klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller de elektriske komponenter.
• LED levetid: The integrated LEDs are designed for extended operation and do not require replacement under normal use.

8. Fejlfinding

If you encounter issues with your downlight, refer to the following common problems and solutions:

Hvis problemet fortsætter efter at have prøvet disse løsninger, skal du kontakte kundesupport.

9. Specifikationer

10. Garanti og support

Garanti: This product comes with a Limited Warranty. Please refer to the product packaging or the manufacturer's official website for specific terms and conditions of the warranty.

Kundesupport: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Juno customer support. Contact information can typically be found on the product packaging or the official Juno webwebsted.

Online ressourcer: For additional information, product updates, or FAQs, visit the official Juno webwebsted: www.acuitybrands.com/brands/juno