ICE-WATCH Ice Digit Retro Digital Watch Instruction Manual

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your ICE-WATCH Ice Digit Retro digital watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.

2. Produktet er slutview

The ICE-WATCH Ice Digit Retro features a digital display and multiple functions controlled by four buttons. Familiarize yourself with the watch's components:

Figur 2.1: Forside view of the ICE-WATCH Ice Digit Retro watch.

Figur 2.2: Side view illustrating the watch buttons.

Knap funktioner:

• MODE knap: Skifter gennem forskellige tilstande (tid, alarm, stopur).
• Genstarts knap: Used for resetting values or selecting items during setting.
• ST/STP-knap: Starts/stops functions (e.g., stopwatch) or adjusts values during setting.
• LIGHT -knap: Aktiverer baggrundsbelysningen for belysning.

3. Opsætning

3.1 Indstilling af tid og dato

1. In Time Display Mode, press the MODE button three times to enter Time Setting Mode. The seconds will begin to flash.
2. Tryk på NULSTIL button to cycle through the setting options: Seconds → Hours → Minutes → Month → Date → Day of the week.
3. While the desired value is flashing, press the ST / STP knappen for at justere værdien. Hold ST / STP to change values faster.
4. To switch between 12-hour and 24-hour format, adjust the hour while in Time Setting Mode. The 'P' indicator signifies PM in 12-hour format.
5. Når alle indstillinger er korrekte, skal du trykke på MODE button to exit Time Setting Mode and return to Time Display Mode.

4. Driftstilstande

4.1 Tidsvisningstilstand

This is the default mode, displaying the current time, day, and date. Press the LYS knappen for at aktivere baggrundsbelysningen i et par sekunder.

4.2 Alarmtilstand

1. Fra tidsvisningstilstand skal du trykke på MODE button once to enter Alarm Mode. The alarm time will be displayed.
2. Tryk på NULSTIL knappen for at vælge den time eller det minut, der skal indstilles.
3. Tryk på ST / STP knappen for at justere den blinkende time eller minut.
4. For at aktivere eller deaktivere alarmen skal du trykke på ST / STP button while in Alarm Mode (without any digits flashing). An alarm icon will appear/disappear on the display.
5. Tryk på MODE button to return to Time Display Mode.

4.3 Stopurstilstand

1. Fra tidsvisningstilstand skal du trykke på MODE button twice to enter Stopwatch Mode. The display will show '00:00:00'.
2. Tryk på ST / STP knappen for at starte stopuret.
3. Tryk på ST / STP knappen igen for at stoppe stopuret.
4. Tryk på NULSTIL knappen for at nulstille stopuret til '00:00:00'.
5. To measure lap/split times, press NULSTIL while the stopwatch is running. The display will show the lap time while the stopwatch continues to run in the background. Press NULSTIL igen for at vende tilbage til visningen af ​​det løbende stopur.
6. Tryk på MODE button to return to Time Display Mode.

5. Vedligeholdelse

5.1 Vandtæthed

Your ICE-WATCH Ice Digit Retro watch is 3 ATM (30 meters) water resistant. This means it is resistant to splashes, rain, and accidental exposure to water. It is ikke egnet for submersion, showering, bathing, swimming, water sports, or diving. Avoid operating buttons while the watch is wet.

5.2 Rengøring

For at rengøre dit ur skal du forsigtigt tørre det af med en blød, tør klud. Ved genstridigt snavs kan du bruge en let tør klud.amp cloth can be used, followed by a dry cloth. Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish and seals.

5.3 Udskiftning af batteri

The watch is powered by a single battery. When the display becomes dim or functions become erratic, the battery may need replacement. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and water resistance. Refer to the specifications for battery type.

6. Fejlfinding

• Skærmen er tom eller svag: Batteriet kan være lavt eller afladet. Udskift batteriet.
• Tidspunktet er forkert: Re-set the time and date following the instructions in Section 3.1. Ensure the 12/24H format is correctly set.
• Alarmen lyder ikke: Ensure the alarm is activated (alarm icon visible on display) and the alarm time is correctly set.
• Knapperne reagerer ikke: Ensure the watch is not wet. If the issue persists, a reset may be required (consult support) or the watch may require servicing.

Hvis problemerne fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.

7. Specifikationer

Figur 7.1: Tilbage view of the watch, displaying model reference and water resistance.

8. Garanti og support

Your ICE-WATCH Ice Digit Retro digital watch comes with a 2 års garanti fra købsdatoen, dækker fabrikationsfejl. Denne garanti dækker ikke skader som følge af forkert brug, ulykker, uautoriserede reparationer eller normal slitage.

Vedrørende garantikrav, teknisk support eller serviceforespørgsler, bedes du kontakte din autoriserede ICE-WATCH-forhandler eller besøge den officielle ICE-WATCH-side. webhjemmeside for kontaktoplysninger til kundeservice.

For mere information, besøg den officielle ICE-WATCH Store.