WOLFANG WD03 4K/2.5K Front and Rear Dash Cam

1. Produktet er slutview

The WOLFANG WD03 is a high-performance dual dash camera system designed to capture detailed footage of your journeys. It features 4K front recording (when rear camera is disconnected) or 2.5K front and 1080P rear recording, wide-angle lenses, night vision capabilities, and smart connectivity for enhanced road safety and evidence protection.

Pakkens indhold

• 1 x WOLFANG WD03 Front Dash Cam
• 1 x bagkamera
• 1 x Sugekopmontering
• 1 x Type-C USB-kabel
• 1 x biloplader
• 1 x 32 GB Micro SD-kort
• 1 x-kortlæser
• 1 x Pry Tool
• 1 x Pin
• 1 x brugermanual

Figure 1.1: WOLFANG WD03 Dash Cam Packing List. This image displays all components included in the product package, such as the front camera, rear camera, various cables, mounts, and the user manual.

2. Opsætning og installation

2.1 Installation af Micro SD-kort

1. Sørg for, at dashcam'et er slukket.
2. Insert the provided 32GB Micro SD card into the card slot on the side of the dash cam until it clicks into place. The dash cam supports Class 10 (and higher) high-endurance microSD cards from 16GB to 128GB.
3. To remove, gently push the card in until it clicks, then release to eject.

2.2 Montering af frontkamera

1. Clean the windshield area where you intend to mount the dash cam. Ensure it is free from dust and grease.
2. Fastgør sugekopbeslaget til dashcam'et.
3. Press the suction cup firmly against the windshield, ideally near the rearview mirror, and secure it by flipping the lever on the mount. Ensure the camera does not obstruct your view.
4. Adjust the camera angle to ensure it captures the road ahead clearly.

2.3 Installation af bagkamera

1. Mount the rear camera on the rear windshield, ensuring it has a clear view of the road behind. Use the adhesive provided or screws if preferred.
2. Route the rear camera cable to the front dash cam. It is recommended to tuck the cable along the car's headliner and A-pillar trim to keep it neat and out of the way.
3. Connect the rear camera cable to the AV-IN port on the front dash cam.

2.4 Strømtilslutning

1. Connect the Type-C USB cable to the dash cam's power input port.
2. Plug the other end of the USB cable into the car charger.
3. Insert the car charger into your vehicle's cigarette lighter socket.
4. Dashcam'et tænder automatisk og begynder at optage, når bilens tænding tændes.

Figure 2.1: Dash Cam Installation Diagram. This diagram illustrates the recommended cable routing for both the front and rear cameras within a vehicle, ensuring a tidy and secure setup.

3. Betjeningsvejledning

3.1 Grundlæggende betjening

• Tænd/sluk: The dash cam powers on automatically with vehicle ignition. To manually power on/off, press and hold the power button.
• Indspilning: Recording starts automatically when the device is powered on. A red indicator light or icon on the screen will confirm recording is active.
• Nødlås: During recording, press the designated button (often indicated by a lock icon) to manually lock the current video segment. This prevents it from being overwritten by loop recording.

Figure 3.1: One-Click Video Lock. This image demonstrates how to manually lock a video segment on the dash cam, protecting it from being overwritten during loop recording.

3.2 Wi-Fi og Smart App-styring

The WD03 features built-in Wi-Fi for seamless connection to your smartphone via the dedicated app (CarLog or similar, check manual for exact app name). This allows for real-time viewing, playback, download, and sharing of recorded footage.

1. Download the official WOLFANG dash cam app from your smartphone's app store (iOS or Android).
2. Turn on the dash cam's Wi-Fi function (refer to the on-screen menu).
3. On your smartphone, go to Wi-Fi settings and connect to the dash cam's Wi-Fi network (SSID usually starts with WOLFANG or WD03). The default password can be found in the dash cam's settings or the quick start guide.
4. Open the dash cam app. You should now be able to view live footage, få adgang til optagede videoer og administrere indstillinger.

Note: The Wi-Fi connection has an effective range of 3 to 5 meters and does not support remote connection.

Figure 3.2: Wi-Fi Connect & APP Control. This image illustrates the seamless connection between the dash cam and a smartphone app, enabling easy viewing, downloading, and sharing of footage.

3.3 Loop-optagelse

The dash cam automatically overwrites the oldest video files with the newest ones when the memory card is full. This ensures continuous recording without manual intervention. Video segments are typically recorded in 1/3/5 minute intervals.

Figure 3.3: Endless Loop Recording. This visual explains how the dash cam continuously records, automatically overwriting the oldest files to ensure uninterrupted footage.

3.4 G-sensor (tyngdekraftssensor)

The built-in G-Sensor detects sudden shakes or collisions. When triggered, it automatically locks the current video segment, preventing it from being overwritten. This ensures critical incident footage er sikret som bevis.

Figure 3.4: Adjustable G-Sensor Sensitivity. This image depicts the G-Sensor's ability to detect impacts and automatically lock video files, safeguarding crucial evidence.

3.5 24-timers parkeringsovervågning

With the 24H Parking Monitor function, the dash cam can continue to monitor your vehicle even when parked. If a collision or significant vibration is detected, the camera will automatically power on and record a short video segment.

Note: A hardwire kit is required for continuous 24H parking monitoring (kit not included). Please contact customer service if you need to purchase one.

Figure 3.5: 24H Parking Monitor. This image highlights the dash cam's capability to monitor your vehicle around the clock, even when parked, requiring a separate hardwire kit for full functionality.

3.6 Overlegen nattesyn

The dash cam is equipped with a large F1.8 aperture, WDR (Wide Dynamic Range) technology, and 6 high-quality glass lenses. These features ensure optimal performance in low-light conditions, capturing clear details like license plates and road signs even at night or in rainy weather.

Figure 3.6: Superior Night Vision. This image demonstrates the dash cam's advanced features, including a wide aperture and WDR, which enable clear video capture in challenging low-light environments.

3.7 superkondensator for forbedret sikkerhed

Unlike traditional batteries, the WD03 uses a super capacitor. This provides greater temperature resistance and reliability, ensuring stable operation in extreme hot or cold conditions. It also helps preserve data in case of sudden power loss.

Figure 3.7: Enhanced Safety with Super Capacitor. This image highlights the benefits of the super capacitor, which ensures data integrity and reliable operation across a wide range of temperatures.

4. Vedligeholdelse

4.1 Formatting the Micro SD Card

It is recommended to format the Micro SD card regularly (e.g., once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the dash cam's system settings menu.

4.2 Cleaning the Dash Cam

Use a soft, dry cloth to clean the dash cam's lens and body. Avoid using abrasive cleaners or solvents, as they may damage the device. Ensure the lens is free of smudges for clear recording.

5. Fejlfinding

• Dash Cam tænder ikke:
  • Check if the car charger is properly inserted into the cigarette lighter socket and the vehicle's ignition is on.
  • Ensure the USB cable is securely connected to both the dash cam and the car charger.
  • Test the car charger with another device to confirm it's working.
• Recording stops or freezes:
  • Formater Micro SD-kortet.
  • Ensure you are using a Class 10 or higher speed Micro SD card. Lower speed cards may not keep up with the data rate.
  • Try a different Micro SD card to rule out card issues.
• Dårlig videokvalitet:
  • Rengør kameralinsen.
  • Sørg for, at beskyttelsesfilmen er fjernet fra linsen.
  • Kontrollér indstillingerne for videoopløsning i dashcam-menuen.
• Problemer med Wi-Fi-forbindelse:
  • Sørg for, at Wi-Fi er aktiveret på dashcam'et.
  • Genstart både dashcam'et og din smartphone.
  • Ensure your smartphone is within the 3-5 meter effective range of the dash cam's Wi-Fi.
  • Re-enter the Wi-Fi password if prompted.

6. Specifikationer

7. Garanti og support

The WOLFANG WD03 Dash Cam comes with a 12-month warranty, which can be extended to 36 months by registering within 7 days of purchase. Lifetime technical support is also provided.

For any questions, technical assistance, or inquiries regarding accessory upgrades (such as hardwire kits or 64GB memory cards), please do not hesitate to contact our customer service team.

Kundeservice email: support.vc@wolfang.co

We aim to resolve any issues to your satisfaction within 24 hours.