ROBOTIME Clear Acrylic Display Case

Indledning

This manual provides instructions for the assembly, use, and maintenance of your ROBOTIME Clear Acrylic Display Case, Model DF03L. This display case is designed to protect and showcase your valuable collectibles, miniature house kits, and other items from dust and damage.

Figure 1: ROBOTIME Clear Acrylic Display Case (DF03L) and its packaging.

Vigtige sikkerhedsoplysninger

• ADVARSEL: Ikke for børn under 3 år på grund af små dele.
• Handle acrylic panels with care to prevent scratches.
• Ensure all panels are securely fitted during assembly to maintain structural integrity.

Pakkens indhold

Your ROBOTIME Clear Acrylic Display Case package includes the following components:

• Acrylic side panels (various sizes)
• Acrylic top panel
• White base panel
• Protective film on all acrylic panels (must be removed before assembly)

Monteringsvejledning

The ROBOTIME Clear Acrylic Display Case features a seamless snap-fit design for quick and easy assembly, typically within 3 minutes. No tools are required.

Trin 1: Forbered paneler

Carefully remove the double-sided protective film from all acrylic panels before beginning assembly. This ensures crystal-clear visibility.

Figure 2: Protective film removal and panel features.

Step 2: Assemble Side Panels to Base

Place the white base panel flat. Insert the side acrylic panels into the grooves on the base, ensuring the grooves on the side panels face inwards. Secure them tightly by pressing down firmly.

Figure 3: Visual guide for panel assembly.

Step 3: Attach Top Panel

Once all four side panels are in place, carefully align and place the top acrylic panel onto the assembled structure. Ensure it snaps securely into the grooves of the side panels.

Figure 4: Attaching the top panel.

Step 4: Front Door Installation

The display case features a front-facing door design. Tilt the front panel slightly to insert it into the top and bottom grooves, then gently push it into place. It should fit snugly.

Monteringsvideoer

For a visual guide on assembly, please refer to the following videos:

Brug

The ROBOTIME Clear Acrylic Display Case is ideal for showcasing a variety of items while protecting them from dust.

• Display Collectibles: Perfect for miniature house kits (except Dora's Loft DG12), action figures, models, figurines, toys, and other memorabilia.
• Støvbeskyttelse: The enclosed design helps keep your items clean and free from dust accumulation.
• Stabelbart design: Multiple display cases can be stacked securely to create a larger display unit, optimizing space and enhancing visual appeal. The classic dovetail structure supports up to 6KG.

Figure 5: Display case providing dust protection for a miniature house.

Figure 6: Stackable design with 6KG carrying capacity.

Figure 7: Front-facing door for easy access.

Opretholdelse

To keep your display case in optimal condition:

• Rensning: Tør akrylfladerne af med en blød, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can scratch or damage the acrylic.
• Støvning: Regularly dust the exterior with a microfiber cloth to maintain clarity.

Specifikationer

Fejlfinding

• Panels not fitting: Ensure the protective film has been completely removed from both sides of all panels. Verify that the grooves are correctly aligned and apply firm, even pressure during assembly.
• Døren lukker ikke ordentligt: Check for any obstructions in the door's path or misalignment of the hinges. Ensure the top and bottom panels are fully seated.
• Scratches on panels: Minor scratches may occur if the protective film was not removed carefully or if abrasive materials were used for cleaning. Always use a soft cloth for cleaning.

Garanti og support

For any questions, concerns, or support regarding your ROBOTIME Clear Acrylic Display Case, please contact ROBOTIME customer service through your retailer's support channels. Please retain your proof of purchase for warranty claims.