Comfort Zone Indoor Tower Space Heater

Produkt overview

The Comfort Zone Indoor Tower Space Heater, Model CZ12828, is designed to provide efficient radiant heat for indoor spaces. Featuring dual quartz tubes, it delivers quick warmth and includes fan-assisted heat distribution. This heater is equipped with user-friendly controls and advanced safety features for reliable operation.

Image: The Comfort Zone Tower Space Heater in operation, showing the radiant heating elements glowing.

Vigtige sikkerhedsinstruktioner

Please read all instructions before using this heater to reduce the risk of fire, electric shock, or injury. Keep this manual for future reference.

• Overophedningsbeskyttelse: The heater is equipped with a built-in sensor that automatically turns off the unit if it reaches an unsafe temperature level.
• Vip-omskifter: An integrated safety switch automatically shuts off the heater if it is accidentally knocked over, helping to prevent fire hazards.
• Hold køligt håndtag: The molded handle and housing are designed to remain cool during operation, allowing for safe transport of the unit.
• ETL Approved: This product meets recognized safety standards.

Image: Visual representation of the heater's intelligent safety features, including overheat sensor, tip-over switch, stay-cool handle, and ETL approval.

Opsætning og placering

The Comfort Zone Tower Space Heater requires no assembly and is ready for immediate use. Ensure the heater is placed on a stable, level surface.

• Place the heater in a location where it can effectively warm the desired area, such as a living room, bedroom, or home office.
• Maintain a safe distance from walls, furniture, and other combustible materials.
• Ensure the power cord is not obstructed or placed under rugs.

Image: The heater positioned in a room, illustrating its suitability for various small indoor spaces like living rooms, bedrooms, and offices.

Image: A diagram showing the compact dimensions of the heater, emphasizing its space-saving design and readiness for use without assembly.

Betjening af dit varmelegeme

The heater features two top-mounted control knobs for easy adjustment of heat settings and thermostat.

Kontrolelementer

• Termostatknap: Adjust the desired room temperature by turning the left knob. The heater will cycle on and off to maintain the set temperature.
• Heat Mode Select Knob: Use the right knob to select between 'OFF', 'LOW' (750W), and 'HIGH' (1500W) heat settings.

Billede: En detaljeret view of the heater's top panel, highlighting the two control knobs for thermostat adjustment and heat mode selection.

Varmeindstillinger

Choose between two power outputs to suit your heating needs:

• LAV (750W): Provides a lower heat output for smaller areas or maintaining warmth.
• HØJ (1500W): Delivers maximum heat output for faster warming of larger spaces.

Image: The heater demonstrating its instant and powerful heat, with an overlay indicating the 750W and 1500W output options.

Pleje og vedligeholdelse

Regelmæssig rengøring og korrekt opbevaring vil sikre din varmeovns levetid og effektive drift.

• Tag altid stikket ud af stikkontakten, og lad varmelegemet køle helt af, inden rengøring.
• Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Sørg for, at der ikke trænger vand eller væsker ind i varmelegemets indre.
• For storage, keep the heater in a cool, dry place when not in use.

Fejlfinding

If your heater is not operating as expected, please refer to the following common issues and solutions:

• Varmeapparatet tænder ikke:
  • Kontroller, om netledningen er tilsluttet korrekt til en fungerende stikkontakt.
  • Ensure the heat mode select knob is set to 'LOW' or 'HIGH', not 'OFF'.
  • Verify that the thermostat knob is set to a temperature higher than the current room temperature.
  • Check if the tip-over switch has been activated (if the unit was moved or tilted). Place the heater upright on a stable surface.
• Heater is not producing heat:
  • Confirm the heat mode is set to 'LOW' or 'HIGH'.
  • Indstil termostaten til en højere indstilling.
  • Ensure the overheat protection has not been triggered. Unplug the unit, let it cool for 10-15 minutes, then plug it back in.

Produktspecifikationer

Garanti og kundesupport

For warranty information and customer support, please refer to the documentation included with your product or visit the official Comfort Zone webwebsted. Gem din købskvittering for garantikrav.

For additional assistance, you may contact the manufacturer, Mr. Brands, LLC.

Yderligere produktinformation

Explore more about Comfort Zone heating solutions: