OREiN 3500LM Motion Sensor Outdoor Flood Lights (Model OL3600330)

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 3500LM Motion Sensor Outdoor Flood Lights. Please read this manual thoroughly before installation and retain it for future reference.

The OREiN Motion Sensor Outdoor Flood Light is designed to provide reliable and efficient outdoor illumination with advanced motion detection capabilities. It features adjustable light heads, multiple operating modes, and a durable, waterproof design suitable for various outdoor environments.

2. Sikkerhedsoplysninger

ADVARSEL: For at reducere risikoen for død, personskade eller materielle skader som følge af brand, elektrisk stød, nedfaldende dele, snitsår/skrammen og andre farer, bedes du læse alle advarsler og instruktioner, der følger med og på armaturæsken og alle armaturmærkater.

• Always turn off the power supply at the circuit breaker before beginning installation or any maintenance.
• Sørg for, at armaturet er korrekt jordet.
• Installer ikke i nærheden af ​​brændbare materialer.
• Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
• Brug sikkerhedsbriller og handsker under installationen.
• This product is designed for outdoor use and is IP65 waterproof.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• OREiN 3500LM Flood Lights (2 units for 2-pack)
• Instruktionsmanual
• Monteringsbeslag
• Skruer
• Trådmøtrikker

4. Produktfunktioner

• 3 lystilstande: TEST Mode, Dusk-to-Dawn (D2D) Mode, and AUTO (Motion) Mode.
• Wide Motion Detection: Equipped with two infrared detectors for a 240° sensing range and up to 40ft detection distance.
• Høj lysstyrke: 3500 Lumens at 5000K (Daylight) with 26W power consumption.
• Justerbare lyshoveder: Three light panels with a 340° lighting angle for flexible coverage.
• Holdbar og vandtæt: IP65 rated for resistance against rain, snow, and wind, made from Acrylonitrile Butadiene Styrene.
• Effektiv varmeafledning: Designed for long lifespan (50,000 hours).
• Hardwired Electric Powered: Provides stable power and consistent brightness without reliance on batteries or solar charging.

5. Opsætning og installation

This flood light is hardwired and requires installation on a junction box. Please follow these steps carefully.

1. Sluk for strømmen: Før du starter, skal du sørge for, at strømmen til installationsområdet er afbrudt ved afbryderen.
2. Sikker monteringsbeslag: Attach the metal mounting plate to your existing 2.75” or 3.5” junction box using the provided screws.
3. Tilslut ledninger: Connect the fixture's wires to your household wiring. Typically, this involves connecting:
   • Sort (Live) til Sort (Live)
   • Hvid (Neutral) til hvid (Neutral)
   • Grøn/bart kobber (jord) til grøn/bart kobber (jord)
   Use the provided wire nuts to secure connections.
4. Sikre lyset: Juster armaturet med monteringsbeslaget og fastgør det på plads.
5. Insert Waterproof Plug: Ensure all connections are sealed and insert the waterproof plug if applicable to prevent moisture ingress.
6. Gendan strøm: Når installationen er færdig, skal du tænde for strømmen igen ved afbryderen.

6. Betjeningsvejledning

The OREiN flood light features an adjustable motion sensor with three operating modes and customizable time and sensitivity settings.

6.1. Justering af lyshoveder

The three light heads can be independently adjusted to direct illumination where needed. The motion sensor itself can also be angled to optimize detection coverage.

6.2. Mode Selection and Adjustments

The motion sensor unit has dials for selecting the operating mode, adjusting the light duration (Time), and setting the motion detection sensitivity (Sens).

• Funktionsvælger: Vælger driftstilstand.
  • TEST-tilstand: The light turns on for 5 seconds when motion is detected, regardless of ambient light conditions (day or night). This mode is for testing the sensor's coverage.
  • D2D (Dusk to Dawn) Mode: The light automatically turns on at dusk and off at dawn. Motion detection is not active in this mode.
  • AUTO (Motion) Mode: The light turns on only at night when motion is detected. The duration the light stays on and the detection distance are adjustable.
• Time Dial: (Applicable in AUTO Mode) Adjusts how long the light stays on after motion is detected. Options typically include 1 minute, 5 minutes, and 10 minutes.
• Sens (Sensitivity) Dial: (Applicable in AUTO Mode) Adjusts the motion detection range. Options typically include 10ft, 20ft, 30ft, and 40ft.

6.3. Produktvideoer

Watch these videos for a visual guide on the product's features and performance.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din projektør.

• Rensning: Tør lampen og bevægelsessensorens linse af med jævne mellemrum med en blød klud.amp klud til at fjerne snavs og rester. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Inspektion: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections.
• Linsepleje: The sensor filter lens uses ultrasonic technology for a tight seal. Avoid tampgår med det.

8. Fejlfinding

If you encounter issues with your OREiN flood light, refer to the following common problems and solutions:

9. Specifikationer

10. Garanti og support

For warranty information or technical support, please contact OREiN customer service. You can reach us through Amazon directly or by searching for our brand name online to find our official contact channels.

Kontaktoplysninger:

• Amazon Contact: Visit the OREiN Store on Amazon
• General Support: Search "OREiN" online for official contact details.

We recommend retaining your purchase receipt for warranty claims.