ZIPRO justerbare håndvægte brugsanvisning

Indledning

Thank you for choosing ZIPRO Adjustable Dumbbells. This manual provides essential information for the safe assembly, operation, and maintenance of your new fitness equipment. Please read this manual thoroughly before first use and keep it for future reference. These dumbbells are designed to facilitate effective strength training exercises, targeting various muscle groups for a comprehensive workout.

Vigtige sikkerhedsoplysninger

• ADVARSEL: Rådfør dig med en læge, før du starter et træningsprogram.
• Always inspect the dumbbells for any damage or loose parts before each use. Do not use if damaged.
• Ensure all weight plates are securely fastened with the threaded clamps before lifting.
• Brug håndvægtene på en flad, stabil overflade.
• Hold børn og kæledyr væk fra udstyret under brug.
• Do not drop the dumbbells, as this may cause damage to the equipment or injury.
• Store dumbbells in a dry, safe place away from direct sunlight and extreme temperatures.

Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, når du åbner pakken.

• 2 x Dumbbell Bars (35 cm length, steel, ribbed handles)
• 4 x Threaded Clamps (star-shaped collars)
• Weight Plates (various sizes, cast iron, 25 mm diameter):
  • Specific quantities and weights may vary based on total weight purchased (e.g., 2.5 kg, 1.25 kg, 0.5 kg plates to reach 20 kg per dumbbell).
• 1 x Storage Case (for convenient transport and storage)

Image: All components of the ZIPRO Adjustable Dumbbell set, including bars, clamps, and weight plates.

Opsætning og montering

1. Udpak komponenter: Carefully remove all items from the storage case.
2. Vælg vægtskiver: Determine the desired weight for your exercise. The dumbbells allow for 16 different weight settings by combining various plates.
3. Load Plates onto Bar: Slide the selected weight plates onto the smooth ends of the dumbbell bar. Ensure they are centered and balanced.
4. Fastgør med Clamps: Once the desired plates are loaded, screw the threaded clamps onto the ends of the bar until they are hand-tight and the plates are firmly secured. Do not overtighten.
5. Bekræft stabilitet: Gently shake the assembled dumbbell to ensure no plates are loose before beginning your workout.

Image: Two fully assembled ZIPRO Adjustable Dumbbells, ready for use.

Image: Detail of dumbbell bar, weight plates, and threaded clamp.

Betjeningsvejledning

Justering af vægt

To adjust the weight, unscrew the threaded clamps from both ends of the dumbbell bar. Carefully slide off or add the desired weight plates. Once the new weight configuration is set, re-secure the clamps tightly. Always ensure both sides of the dumbbell have equal weight distribution for balanced lifting.

Korrekt brug

• Always maintain proper form during exercises to prevent injury.
• Start with a lighter weight to master the exercise technique before increasing lasten.
• Perform movements in a controlled manner, avoiding sudden jerks or drops.
• Breathe properly throughout your workout.

Pleje og vedligeholdelse

• Rensning: Wipe down the dumbbell bars and plates with a damp cloth after each use to remove sweat and dirt. Do not use abrasive cleaners.
• Opbevaring: Store the dumbbells in their provided case or a dry, cool place when not in use. Avoid prolonged exposure to moisture or direct sunlight.
• Inspektion: Periodically check the threaded clamps and bars for any signs of wear, rust, or damage. Replace any worn parts immediately.

Image: The durable storage case for the ZIPRO Adjustable Dumbbells.

Fejlfinding

Produktspecifikationer

Garanti og support

For warranty information or technical support regarding your ZIPRO Adjustable Dumbbells, please refer to the warranty card included with your purchase or visit the official ZIPRO webwebsted. Gem din købsbevis i tilfælde af garantikrav.

Producent: Morele.net Sp. z oo