RHINO DISBEF-3T Tredobbelt Tank Kolde Drikkevare Dispenser Brugsanvisning

Indledning

Thank you for choosing the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and retain it for future reference.

Billede: Forside view of the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser, showcasing its three clear tanks and stainless steel base with dispensing levers.

Vigtige sikkerhedsinstruktioner

• Læs alle instruktioner før brug.
• Sørg for, at strømforsyningen stemmer overens med specifikationerne på typeskiltet.
• Nedsænk ikke apparatet, ledningen eller stikket i vand eller andre væsker.
• Hold øje med børn for at sikre, at de ikke leger med apparatet.
• Træk stikket ud af stikkontakten, når det ikke er i brug, og før rengøring.
• Betjen ikke noget apparat med en beskadiget ledning eller stik, eller efter at apparatet ikke fungerer korrekt eller er blevet beskadiget på nogen måde.
• Brug kun tilbehør anbefalet af producenten.
• Må ikke bruges udendørs.
• Lad ikke ledningen hænge ud over kanten af ​​et bord eller bord, eller rør ved varme overflader.
• Placer altid apparatet på en stabil, plan overflade.
• Dette apparat er beregnet til kommerciel brug.

Produktkomponenter

The RHINO DISBEF-3T dispenser consists of the following main components:

• Basisenhed: Contains the cooling system and electrical components, made of stainless steel.
• Beverage Tanks (x3): Transparent, food-grade polycarbonate tanks, each with an 18-liter capacity.
• Låg (x3): Covers for each beverage tank.
• Dispensing Levers (x3): "Push" type levers for controlled beverage flow.
• Drip Trays (x3): Removable trays located below each dispensing lever to catch spills.
• Agitation System: Fountain-type agitators within each tank to keep beverages mixed and chilled.

Image: An illustrative diagram highlighting key features of the dispenser, including triple tanks, polycarbonate construction, stainless steel cabinet, 680W power, and 18 liters per tank capacity.

Opsætning og installation

1. Udpakning: Tag forsigtigt dispenseren ud af emballagen. Undersøg den for eventuelle skader.
2. Placering: Place the dispenser on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit, especially at the rear and sides, to allow for proper heat dissipation from the cooling system.
3. Rensning: Before first use, thoroughly clean all removable parts (tanks, lids, drip trays, agitators) with mild soap and water. Rinse thoroughly and dry.
4. Forsamling:
   • Insert the agitators into their respective positions within the base unit.
   • Place the clean beverage tanks onto the base unit, ensuring they are securely seated.
   • Attach the lids to the tanks.
   • Position the drip trays under each dispensing lever.
5. Strømtilslutning: Plug the power cord into a grounded electrical outlet that matches the appliance's voltage and frequency (680W power requirement).

Betjeningsvejledning

1. Filling Tanks: Open the lids and pour your desired cold beverages into each of the three 18-liter tanks. Do not overfill.
2. Tænd: Locate the power switch (usually on the side or rear of the base unit) and turn the dispenser ON.
3. Cooling and Agitation: The cooling system will begin to chill the beverages, and the fountain-type agitation system will start mixing the contents to maintain an even temperature and prevent settling. This process may take some time depending on the initial temperature of the beverages.
4. Udlevering: To dispense a beverage, place a cup under the desired dispensing lever and press the lever inward. Release the lever to stop the flow.
5. Overvågningsniveauer: Regularly check beverage levels in the transparent tanks and refill as needed.

Billede: Et nærbillede view of the three "PUSH" dispensing levers on the front of the stainless steel base, indicating how to operate them.

Billede: Et nærbillede view of the three removable drip trays located beneath the dispensing levers, designed to catch any spills.

Rengøring og vedligeholdelse

Regelmæssig rengøring og vedligeholdelse er afgørende for din dispensers levetid og hygiejniske drift.

1. Daglig rengøring:
   • Turn off and unplug the dispenser.
   • Empty any remaining beverages from the tanks.
   • Remove the tanks, lids, agitators, and drip trays.
   • Wash these removable parts with warm, soapy water. Use a soft brush for agitators if needed.
   • Rinse thoroughly with clean water and allow to air dry completely.
   • Wipe down the exterior of the base unit with a damp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke basenheden i vand.
2. Periodisk vedligeholdelse:
   • Kontroller netledningen for tegn på beskadigelse.
   • Ensure ventilation openings on the base unit are clear of dust and debris.

Fejlfinding Guide

Specifikationer

Image: A diagram illustrating the dimensions of the dispenser: 70 cm width, 40 cm depth, and 73 cm height, with a total weight of 48 kg.

Garanti og support

For warranty information, technical support, or service inquiries, please contact RHINO customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Refer to the official RHINO webwebstedet eller din købsdokumentation for specifikke kontaktoplysninger og garantivilkår.