Brugermanual til Vinsetto Ergonomisk Kontorstol (Model: 921-672V00BK)

Produkt overview

Thank you for choosing the Vinsetto Ergonomic Office Chair. This chair is designed to provide comfort and support during extended periods of sitting. It features generous foam padding and breathable mesh fabric, along with multiple adjustment options to customize your seating experience.

Nøglefunktioner:

• Ergonomisk design: Contemporary black finish with a curved mesh backrest for optimal posture.
• Head and Lumbar Support: Features an adjustable headrest and integrated lumbar support to alleviate spinal pressure.
• Justerbar komfort: Customize seat height, armrest position, and lumbar support to fit your preferences and desk height.
• Vippefunktion: Recline the backrest for relaxation and adjust tilt tension for personalized rocking motion.
• Mobilitet: Equipped with a 360° swivel seat and five multi-directional casters for easy movement around your workspace.

En fuld view of the Vinsetto ergonomic office chair in black, featuring a mesh backrest, adjustable headrest, and five-star base with casters.

Vigtige sikkerhedsinstruktioner

ADVARSEL:

• Assembly is required. Please follow all provided assembly instructions carefully to ensure proper setup and safety.
• This product is intended for office use. For your well-being, take regular breaks to avoid potential back discomfort from prolonged sitting.
• Overskrid ikke den maksimale lasteevne for 120 kg (265 lbs). Overloading can cause damage to the chair and potential injury.
• Ensure the product is stable before and during use, especially when utilizing the 360° swivel casters. Avoid sudden movements that could compromise stability.

Pakkens indhold

Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support immediately.

• Ryglænssamling
• Sædepude
• Armlæn (2)
• Gas Lift cylinder
• Femstjernet base
• Hjul (5)
• Mekanismeplade
• Nakkestøtte
• Hardware-sæt (skruer, skiver, unbrakonøgle)
• Instruktionsmanual

Monteringsvejledning

Follow these steps carefully to assemble your Vinsetto Ergonomic Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

Trin 1: Fastgør hjulene til basen

Insert each of the five casters into the holes at the end of the chair's five-star base until they click securely into place.

Et sammensat billedeasing various components and features of the chair, including mesh fabric, thick padding, gas lift, solid base, and swivel design, which includes the casters and base.

Step 2: Insert Gas Lift into Base

Place the gas lift cylinder into the center hole of the assembled five-star base. Ensure it is seated firmly.

Step 3: Attach Mechanism Plate to Seat Cushion

Align the mechanism plate with the screw holes on the underside of the seat cushion. Secure it using the provided screws from the hardware kit. Ensure the 'FRONT' arrow (if present) on the mechanism points towards the front of the seat.

Trin 4: Fastgør armlænene til sædehynden

Fastgør armlænene til siderne af sædehynden med de dertil beregnede skruer. Spænd dem ikke for hårdt i starten.

Step 5: Attach Backrest to Seat Cushion and Armrests

Connect the backrest to the seat cushion and armrests. Secure with screws. Once all screws are in place, tighten all screws on the armrests and backrest evenly.

Step 6: Attach Headrest

Slide the headrest into the designated slots at the top of the backrest. Adjust to your preferred height and angle.

En detaljeret view of the adjustable headrest, showing its vertical sliding and rotational capabilities for personalized neck support.

Trin 7: Tilslut sædeenheden til gasløfteren

Carefully place the assembled seat and backrest onto the gas lift cylinder. Press down firmly to secure the connection.

Betjening af din stol

Sædehøjdejustering

To adjust the seat height, locate the lever on the right side of the seat. To raise the seat, lift your weight off the chair while pulling the lever upwards. To lower the seat, remain seated and pull the lever upwards.

An image highlighting the lever for adjusting the seat height, with arrows indicating the 'up' and 'down' directions.

Backrest Tilt Function

To recline the backrest, pull the lever on the left side of the seat outwards. This will unlock the backrest, allowing it to tilt. To lock the backrest in an upright position, push the lever inwards. The chair allows for a comfortable rocking motion when unlocked.

Justering af hældningsspænding

The round knob located under the front of the seat controls the tilt tension. Turn the knob clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).

An illustration demonstrating the backrest tilt function, showing the chair reclining and the knob for adjusting tilt tension.

Justerbar nakkestøtte

The headrest can be adjusted vertically by sliding it up or down to find your optimal neck support. It can also be rotated slightly for fine-tuning the angle.

Justering af lændestøtte

The integrated lumbar support is designed to provide optimal support for your lower back. Adjustments typically involve sliding or rotating a mechanism on the backrest to position the support where it feels most comfortable for you.

A close-up photograph of the lumbar support cushion, emphasizing its ergonomic shape and material.

Pleje og vedligeholdelse

Rensning

• For mesh and fabric surfaces, use a soft cloth dampened with mild soap and water. Gently wipe the affected areas. Do not use harsh chemicals, abrasive cleaners, or bleach, as these can damage the material.
• Tør plastik- og metaldele af med en sprayflaskeamp cloth. Dry immediately to prevent water spots or corrosion.
• Avoid excessive moisture. If the chair becomes wet, dry it thoroughly before use.

Almen pleje

• Regularly check all screws and bolts to ensure they are tight. Retighten as necessary to maintain stability and prevent squeaking.
• Keep the chair away from direct sunlight and heat sources (e.g., radiators, fireplaces) to prevent material degradation, fading, or warping.
• Avoid standing on the chair or using it for purposes other than its intended use as an office chair.

Fejlfinding Guide

Issue: Chair does not adjust height.

Løsning: Ensure the gas lift lever is fully engaged. Check if the gas lift cylinder is properly seated in both the base and the mechanism plate. If the issue persists, the gas lift may be faulty and require replacement.

Issue: Chair squeaks or wobbles.

Løsning: Check all assembly screws and bolts and tighten them securely. Ensure the casters are fully inserted into the base. If squeaking persists, a small amount of silicone-based lubricant can be applied to moving parts, avoiding contact with fabric.

Issue: Backrest does not recline or lock.

Løsning: Verify that the tilt lock lever is correctly engaged or disengaged. Adjust the tilt tension knob (located under the seat) to ensure it's not too tight or too loose, which can affect the recline mechanism.

Produktspecifikationer

A technical diagram illustrating the key dimensions of the Vinsetto office chair, including overall height, width, depth, seat height, and backrest height.

Garantioplysninger

This Vinsetto product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, terms, and conditions, please refer to the documentation included with your purchase or contact Vinsetto customer support directly. Please retain your proof of purchase for warranty claims.

Kundesupport

If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please do not hesitate to contact Vinsetto customer support. Contact information can typically be found on the product packaging or the official Vinsetto webwebsted.

For online support and further information, please visit: www.vinsetto.com