Jura E8 automatisk kaffemaskine brugsanvisning

1. Introduktion

The Jura E8 is a fully automatic coffee machine designed to prepare a wide range of coffee specialties from freshly ground beans. It offers 17 beverage options, allowing for personalized coffee experiences at the touch of a button. This machine features an advanced P.A.G.2 grinder, an eighth-generation 3D brewing unit, and an intuitive 3.5-inch color display for ease of use.

Figur 1: Forside view of the Jura E8 automatic coffee machine.

2. Opsætning

Follow these steps for the initial setup of your Jura E8 coffee machine:

1. Udpakning: Fjern forsigtigt al emballage, og placer maskinen på en stabil, plan overflade.
2. Strømtilslutning: Connect the power cable to the machine and then to a grounded power outlet.
3. Vandtank: Remove the water tank, rinse it, and fill it with fresh, cold water. Insert the water filter if provided, then reinsert the tank into the machine.


Figur 2: Fyldning af vandtanken.

4. Bønnetragt: Open the aroma preservation cover and fill the bean hopper with fresh coffee beans.

Figure 3: Filling the bean hopper.
5. Indledende opstart: Follow the on-screen instructions on the 3.5-inch color display for the initial setup process, which typically includes language selection, water hardness setting, and rinsing cycles.

3. Betjeningsvejledning

The Jura E8 offers a user-friendly interface for preparing various coffee specialties.

3.1. Beverage Selection

Use the 3.5-inch color display and the six operating buttons to navigate through the menu. The display shows clear pictures and graphics of available options.

Figure 4: The E8's intuitive color display.

To prepare a drink:

1. Stil en kop under kaffetuden.
2. Select your desired beverage from the display. The machine will automatically grind the beans and brew the coffee.
3. For milk-based drinks, ensure the milk system is connected and contains fresh milk.

3.2. Tilpasning

The E8 allows for customization of drinks. Depending on the beverage, you can adjust parameters such as coffee strength, water volume, and milk foam quantity. These options are typically presented on the display before brewing.

3.3. Justering af kværn

The P.A.G.2 grinder setting can be adjusted using the ergonomically shaped selector switch. Adjusting the grinder allows you to fine-tune the fineness of the coffee grounds, impacting the flavor extraction. It is recommended to adjust the grinder only when the grinder is running.

Figure 5: Adjusting the P.A.G.2 grinder.

3.4. Specialty Range

The Jura E8 can prepare a variety of coffee specialties, including:

Figure 6: Jura E8 Specialty Range.

4. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your Jura E8.

4.1. Rengøring af mælkesystemet

The E8 features an automatic one-touch milk system cleaning process. Follow the prompts on the display to initiate this cycle. Regular cleaning prevents blockages and maintains hygiene.

Figure 7: Milk system cleaning.

4.2. Drip Tray and Coffee Grounds Container

The drip tray and coffee grounds container should be emptied and cleaned regularly. The design of the drip tray prevents water from spilling and allows for convenient removal with one hand.

4.3. Udskiftning af vandfilter

The machine will prompt you when the water filter needs to be replaced. Follow the on-screen instructions for replacing the filter to ensure optimal water quality and prevent descaling issues.

4.4. Afkalkning

Depending on your water hardness and filter usage, the machine may require descaling. The display will guide you through the descaling process when necessary.

5. Fejlfinding

This section addresses common issues you might encounter with your Jura E8.

• Issue: Coffee volume is significantly less than selected.
  Mulig årsag: Blockage in the coffee spout or brewing unit, or an issue with the pump.
  Løsning: Perform a cleaning cycle for the coffee system. Ensure the brewing unit is clean. If the problem persists, contact Jura customer service.
• Issue: Machine displays an error message.
  Mulig årsag: Various internal issues.
  Løsning: Refer to the specific error code displayed on the screen and consult the detailed troubleshooting section in the full user manual or Jura's online support. Often, turning the machine off and on again can resolve temporary errors.
• Issue: Milk foam is not consistent or absent.
  Mulig årsag: Milk system is dirty or blocked, or milk is not cold enough.
  Løsning: Perform a thorough milk system cleaning. Ensure all components are correctly assembled. Use fresh, cold milk.
• Issue: Coffee tastes weak or watery.
  Mulig årsag: Grinder setting is too coarse, insufficient coffee dose, or old coffee beans.
  Løsning: Adjust the grinder to a finer setting (see Section 3.3). Ensure the bean hopper is filled with fresh beans. Check coffee strength settings.

If you encounter persistent issues not covered here, please refer to the comprehensive troubleshooting guide available on the official Jura webwebsted eller kontakt deres kundesupport.

6. Specifikationer

7. Garanti og support

For warranty information, please refer to the official Jura manufacturer's website or the documentation included with your product. It is important to purchase your Jura E8 from an authorized dealer to ensure warranty validity. Some third-party purchases may not be covered by the manufacturer's warranty.

For technical support, service, or to order accessories and cleaning products, please visit the official Jura webhjemmeside eller kontakt deres kundeserviceafdeling direkte.

8. Officielle produktvideoer

Der blev ikke fundet nogen officielle produktvideoer fra sælgeren i de angivne data, som kan integreres i denne manual.