SENCOR SRW 6010WH Robotvinduesvasker Brugermanual

1. Introduktion

Thank you for choosing the SENCOR SRW 6010WH Robotic Window Cleaner. This device is designed to provide effortless and efficient cleaning of windows, mirrors, and other glass surfaces. Please read this manual thoroughly before operating the device to ensure safe and optimal performance. Keep this manual for future reference.

2. Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden:

• Ensure the safety rope is securely attached and taut before operation, especially when cleaning high windows.
• Do not use the device on cracked or damaged glass surfaces.
• Hold hænder, hår og løstsiddende tøj væk fra bevægelige dele.
• Nedsænk ikke enheden i vand eller andre væsker.
• Brug kun den originale strømadapter, der fulgte med enheden.
• Opbevar enheden på et tørt, køligt sted, når det ikke er i brug.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.

3. Produktet er slutview

3.1 Komponenter

Figur 1: SENCOR SRW 6010WH Robotic Window Cleaner and included accessories. This image displays the main robot unit, power adapter, power cord, remote control, 10 microfiber pads, a water bottle for convenient filling, and the 5-meter safety rope with carabiner.

1. Robotic Window Cleaner Unit
2. Strømadapter
3. Strømledning
4. Remote Control (requires 2x AAA batteries, included)
5. Microfiber Cleaning Pads (10x)
6. Water Bottle for filling
7. Safety Rope (5m)

3.2 Funktioner

• Kraftig sugning: 3,000 Pa vacuum ensures secure attachment to glass surfaces.
• Dual Rotating Discs: Equipped with replaceable microfiber pads for thorough cleaning.
• Integreret vandtank: 60 ml capacity with two ultrasonic nozzles for automatic water spraying.
• Smart gyro-navigation: Sencor Smart Gyro system for systematic movement and detection of frames/edges on frameless surfaces.
• Flere rengøringsmetoder: Three cleaning modes with water dosage control.
• Kontrolmuligheder: Can be controlled via remote control or directly on the unit.
• Backup batteri: Built-in battery for power failure protection.
• Alsidig brug: Suitable for windows, mirrors, and other glass surfaces.

4. Opsætning

1. Oplad batteriet: Before first use, fully charge the internal backup battery. Connect the power adapter to the robot and a power outlet. The charging indicator light will show the status.
2. Attach Microfiber Pads: Securely attach two clean microfiber pads to the rotating discs on the underside of the robot. Ensure they are centered and flat.
3. Fyld vandtank: Open the water tank cap and use the provided water bottle to fill the 60 ml tank with clean water or a suitable glass cleaning solution. Close the cap tightly.
4. Tilslut sikkerhedsrebet: For safety, always attach the 5-meter safety rope to a sturdy anchor point (e.g., a heavy piece of furniture, a window frame hook) before placing the robot on the window. Ensure the rope is taut but allows the robot to move freely across the cleaning area.
5. Tilslut strøm: Plug the power cord into the power adapter, and then connect the adapter to the robot. Plug the power adapter into a wall outlet. The robot requires continuous power during operation. The backup battery is only for power failure protection.

5. Betjeningsvejledning

5.1 Initial Placement and Start

Figur 2: Demonstrates placing the robot on a window and controlling it with the remote. The robot is positioned on the glass, and a hand is shown pressing a button on the remote control.

1. Ensure the glass surface is relatively clean of large debris to prevent scratching.
2. Hold the robot firmly and place it on the glass surface, approximately 10 cm (4 inches) from the edge.
3. Press the power button on the robot or the remote control. The robot will activate its vacuum suction and firmly attach to the glass. Wait for the suction to stabilize before releasing.
4. Once attached, select a cleaning mode using the remote control. The robot will begin its cleaning path.

5.2 Rengøringstilstande

The SENCOR SRW 6010WH offers three cleaning modes:

• Automatic Mode (Z-path): Ideal for tall windows. The robot cleans in a Z-shaped pattern from top to bottom.
• Automatic Mode (N-path): Suitable for wide windows. The robot cleans in an N-shaped pattern from left to right.
• Spot rengøringstilstand: For concentrated cleaning of a specific area. Use the directional arrows on the remote to guide the robot.

You can also control the water spray dosage via the remote control.

5.3 Stopping and Removing the Robot

Figur 3: The SENCOR SRW 6010WH robot actively cleaning a large window, demonstrating its movement and water spray function.

1. To stop the robot, press the power button on the robot or the remote control. The robot will pause its operation.
2. To remove the robot, ensure it is in a safe, accessible position. Press and hold the power button until the vacuum suction releases. Carefully pull the robot off the glass.
3. Always hold the robot firmly when releasing suction to prevent it from falling.

6. Vedligeholdelse

6.1 Rengøring af mikrofiberpuder

The microfiber pads should be cleaned after each use. They are washable and reusable.

• Remove the pads from the rotating discs.
• Hand wash or machine wash the pads with mild detergent. Do not use bleach or fabric softener.
• Air dry completely before reattaching or storing.

6.2 Rengøring af robothuset

Tør robottens yderside af med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.

• Ensure the suction vents are clear of dust and debris.
• Periodically check the ultrasonic nozzles for blockages and clean gently if necessary.

6.3 Opbevaring

When not in use, store the robot and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

SENCOR provides a warranty for this product. Please refer to the warranty card included in your product packaging for detailed terms and conditions. For technical support, spare parts, or service inquiries, please contact SENCOR customer service or visit the official SENCOR website. Spare parts are available for 5 years from the date of purchase.

Note: Always provide your model number (SRW 6010WH) and ASIN (B0D3HJG692) when contacting support.