Behringer Spice Analog Semi-modulær Polyrhythmisk Synthesizer Brugermanual

Indledning

The Behringer Spice is a powerful analog semi-modular polyrhythmic synthesizer designed for sound exploration and creative music production. Featuring a unique architecture with two voltage-controlled oscillators (VCOs), a multimode voltage-controlled filter (VCF), a voltage-styret amplifier (VCA), and a versatile 32-point patch matrix, the Spice offers extensive sound design possibilities. Its integrated dual 4-step sequencer and polyrhythm generator enable complex rhythmic patterns and evolving sonic textures.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Behringer Spice synthesizer. Please read it thoroughly to ensure proper use and to maximize your creative potential with this instrument.

Produkt overview

Figure 1: Front Panel Layout of the Behringer Spice Synthesizer. This image displays the entire control surface, including the VCO, VCF, VCA, and Sequencer sections, along with the extensive patch matrix and MIDI/audio connections.

The Behringer Spice features a logically laid out front panel, providing intuitive access to its various synthesis parameters. Key sections include:

• VCO 1 & VCO 2: Two independent Voltage Controlled Oscillators with controls for Frequency, Wave Shape, and Sub-Oscillator levels.
• VCF: A bindtage Controlled Filter section with Cutoff and Resonance controls, and a dedicated VCF Envelope.
• VCA: A bindtage Kontrolleret Amplifier section with Attack, Decay, and Volume controls.
• Sekvenser: A dual 4-step sequencer with Tempo, Play/Stop, Trigger, and various sequence manipulation controls.
• Patch Matrix: A 32-point patch bay allowing for extensive signal routing and modulation possibilities.
• Forbindelse: MIDI In/Out/Thru, Audio In/Out, and Headphone output.

Opsætning

1. Strømtilslutning

Connect the supplied power adapter to the DC input jack on the rear panel of the Spice synthesizer. Plug the adapter into a suitable power outlet. The unit will power on automatically.

2. Lydforbindelser

• Main Output (OUT): Connect a 1/4" TS cable from the "OUT" jack on the front panel to your mixer, audio interface, or amplivligere.
• Audio Input (IN): An external audio source can be routed through the Spice's VCF and VCA by connecting it to the "IN" jack.
• Hovedtelefoner (TELEFONER): Connect stereo headphones to the "PHONES" jack for private monitoring. Adjust the main VOLUME knob to control headphone level.

3. MIDI-forbindelser

• MIDI IN: Connect a MIDI cable from your MIDI controller, computer interface, or other MIDI device to the "MIDI IN" port to send MIDI data (notes, CCs) to the Spice.
• MIDI OUT/THRU: Use "MIDI OUT/THRU" to send MIDI data generated by the Spice (e.g., sequencer data) to other MIDI devices, or to pass through incoming MIDI data from the MIDI IN port.

4. Initial Patching

The Behringer Spice is semi-modular, meaning it can produce sound without any patch cables connected. However, its full potential is unlocked by using the 32-point patch matrix. Start by experimenting with simple connections, such as routing a VCO output to a VCF input, or an LFO to a VCO frequency input.

Betjeningsvejledning

Voltage Controlled Oscillators (VCO 1 & VCO 2)

The Spice features two identical VCOs, each with dedicated controls:

• FREKVENS: Adjusts the fundamental pitch of the oscillator.
• FORM: Selects the waveform (triangle, sawtooth, square, pulse). The pulse width can be modulated via the patch matrix (VCO1PWM, VCO2PWM).
• SUB 1 FREQ / SUB 2 FREQ: Controls the frequency of two sub-oscillators, which add lower octaves to the main waveform.
• VCO 1 LEVEL / VCO 2 LEVEL: Adjusts the output level of the main oscillator.
• SUB 1 LEVEL / SUB 2 LEVEL: Adjusts the output level of the respective sub-oscillators.
• SEQ 1 ASSIGN / SEQ 2 ASSIGN: Assigns the sequencer output to modulate OSC 1 or OSC 2, and their sub-oscillators.

Voltage kontrolleret filter (VCF)

The VCF shapes the timbre of the sound:

• SKÆRE AF: Indstiller den frekvens, hvor filteret begynder at dæmpe harmoniske.
• RESONANS: Boosts frequencies around the cutoff point, creating a more pronounced filter effect.

VCF Envelope

This envelope generator modulates the VCF cutoff frequency:

• ANGREB: Controls the time it takes for the envelope to reach its peak level after a note is triggered.
• HENFALD: Controls the time it takes for the envelope to fall from its peak to zero.
• BELØB: Adjusts the intensity of the envelope's modulation on the VCF cutoff.

Voltage Kontrolleret Amplifier (VCA)

The VCA controls the overall volume of the sound:

• ANGREB: Controls the time it takes for the sound to reach its full volume after a note is triggered.
• HENFALD: Controls the time it takes for the sound to fade out after the attack phase.
• BIND: Sets the overall output level of the synthesizer.

Sequencer

The Spice features a dual 4-step sequencer for creating rhythmic and melodic patterns:

• TID: Justerer sequencerens afspilningshastighed.
• AFSPIL/STOP: Starter og stopper sequencer-afspilningen.
• TRIGGER: Manually triggers a single step of the sequencer.
• NULSTIL: Resets the sequencer to its first step.
• EG: Toggles the envelope generator for the sequencer.
• NÆSTE: Advances the sequencer to the next step.
• ±1, ±2, ±5: Controls for transposing the sequence by octaves.
• SEQ OCT: Adjusts the octave range of the sequencer.
• QUANTIZE: Quantizes the sequencer output to specific musical intervals.
• JI / ET: Selects between Just Intonation and Equal Temperament for tuning.
• ASSIGN (SEQ 1 / SEQ 2): Assigns the output of each sequencer to various modulation destinations via the patch matrix.
• RYTME: Controls the polyrhythmic generator, allowing for complex rhythmic patterns.
• DIV: Divides the clock signal for rhythmic variations.

Patch Matrix

The 32-point patch matrix is the heart of the Spice's semi-modular capabilities. It allows you to reroute internal signals and connect external modules. Each jack is labeled with its function (e.g., VCO1, VCA, CLOCK, TRIGGER). Connecting a cable to an input overrides its normalled connection, while connecting to an output allows you to send that signal elsewhere.

Experiment with connecting different sources to different destinations to discover new sounds and modulation possibilities. For exampdet:

• Forbinde VCF EG output til VCO1 FREQ input for pitch modulation.
• Rute UR output til SEQ1 CLK input for external clocking of the sequencer.
• Bruge RYTME outputs to trigger other modules or events.

Opretholdelse

Rensning

To clean the Behringer Spice, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the unit. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and components.

Opbevaring

When not in use for extended periods, store the synthesizer in a cool, dry place away from direct sunlight and extreme temperatures. If possible, keep it in its original packaging or a protective case to prevent dust accumulation and physical damage.

Almen pleje

• Undgå at placere tunge genstande oven på enheden.
• Udsæt ikke enheden for overdreven fugt eller væsker.
• Sørg for korrekt ventilation for at forhindre overophedning.
• Handle patch cables and connectors with care to prevent damage to the jacks.

Fejlfinding

• Ingen strøm:
  • Sørg for, at strømadapteren er korrekt tilsluttet både enheden og en fungerende stikkontakt.
  • Kontroller, at stikkontakten er aktiv ved at tilslutte en anden enhed.
  • Check if the power adapter itself is functioning correctly.
• Ingen lydoutput:
  • Check the VOLUME knob on the Spice and ensure it is turned up.
  • Verify that audio cables are correctly connected to the "OUT" jack and your mixer/interface.
  • Ensure your mixer/interface input levels are set appropriately and not muted.
  • If using headphones, ensure they are plugged into the "PHONES" jack and the volume is up.
  • Check the VCA ATTACK and DECAY settings; if Attack is very long, sound may take time to appear.
  • Ensure the VCF CUTOFF is not set too low, filtering out all sound.
• MIDI svarer ikke:
  • Ensure MIDI cables are correctly connected to "MIDI IN" from your controller/interface.
  • Verify that the MIDI channel settings on your controller and the Spice are matching (refer to advanced MIDI settings in the full manual if available).
  • Check if your MIDI controller is sending data.
• Sequenceren afspiller ikke:
  • Tryk på PLAY/STOP-knappen.
  • Ensure the TEMPO knob is not set to minimum.
  • If using external clock, verify the CLOCK signal is present and connected to the appropriate patch point.

Specifikationer

Garanti og support

Behringer products are designed and manufactured to the highest standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Behringer website. Technical support and service information can also be found on the Behringer webwebstedet eller ved at kontakte din lokale forhandler.

For the most up-to-date information and additional resources, please visit: www.behringer.com