Indledning
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Perlegear Electric Ceiling TV Mount (Model PGCM10). Please read this manual thoroughly before installation and retain it for future reference. This motorized mount is designed for flat or curved screen TVs ranging from 32 to 70 inches, with a maximum weight capacity of 88 lbs and VESA mounting patterns from 200x100mm to 600x400mm.
Vigtige sikkerhedsoplysninger
ADVARSEL: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Do not install on sloped ceilings. This mount is designed for flat roofs or concrete ceilings only.
- Sørg for, at monteringsfladen sikkert kan bære den samlede vægt af beslaget og tv'et.
- Use only the provided hardware. If any parts are missing or defective, contact Perlegear customer support.
- Overskrid ikke den maksimale vægtkapacitet på 40 kg.
- Dette produkt indeholder små genstande, der kan udgøre en kvælningsfare, hvis det sluges. Holdes væk fra børn.
- Always use a stud finder to locate wood joists or ensure concrete is suitable for drilling.
- Two people are recommended for installation to ensure safety.
Pakkens indhold
Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter med installationen.
Image: All components of the Perlegear Electric Ceiling TV Mount, including the main motorized unit, remote control, and various hardware bags.
- Motoriseret loftmonteringsenhed
- TV Bracket Assembly (various parts)
- Fjernbetjening (kræver 2 AAA-batterier, medfølger ikke)
- Strømadapter
- Hardware Kit (bolts, washers, spacers, Allen key, wrench)
- Boreskabelon
- Instruktionsmanual
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | PGCM10 |
| Tv -størrelse kompatibilitet | 32" - 70" Flat and Curved Screens |
| Maksimal belastningskapacitet | 88 lbs (40 kg) |
| VESA monteringsmønstre | 200x100mm til 600x400mm |
| Tilt justering | 0° - 75° |
| Justering af nivellering | ±2° (Manual) |
| Full Expansion Time | 32 sekunder |
| Motorkraft | 150W |
| Materiale | Legeret stål |
| Fjernbetjenings rækkevidde | Op til 33 fod |
Image: Visual summary of compatibility: TV size 32"-70", Max VESA 600x400mm, Min VESA 200x100mm, Max Load 88 lbs. Compatible with wood joist and wood wall installations.
Opsætning og installation
Before beginning, ensure you have all necessary tools and that the mounting location is suitable. This mount is not compatible with sloped ceilings.
Step 1: Function Test
Before full installation, perform a function test to ensure the motorized unit is working correctly.
- Connect the power adapter to the motorized ceiling mount unit.
- Sæt strømadapteren i en stikkontakt.
- Sæt 2 AAA-batterier (medfølger ikke) i fjernbetjeningen.
- Use the remote control to extend and retract the mount. Verify smooth operation.
Video: An official Perlegear video demonstrating the motorized extension and retraction of the ceiling TV mount, highlighting its smooth operation.
Step 2: Attach the TV Bracket Assembly
Assemble the TV bracket arms to the center plate using the provided bolts and nuts. Ensure all connections are secure.
Image: The TV bracket assembly process, showing the attachment of the horizontal arms to the central plate.
Step 3: Attach the TV Bracket Assembly to Your TV
Depending on your TV's back panel design (flat or curved/with a bump), select the appropriate mounting option and use the correct screws and spacers from the hardware kit. Ensure the bracket is centered and securely fastened to the TV's VESA holes.
Image: Diagram illustrating the wide compatibility of the mount with various TV sizes (32"-70") and VESA patterns, along with the maximum load capacity of 88 lbs.
Video: Official Perlegear installation video for the PGCM10, demonstrating how to attach the TV bracket assembly to the TV, including options for flat and curved back TVs.
Step 4: Attach the Mount to the Ceiling
Locate the wood joists or suitable concrete area in your ceiling. Use the drilling template to mark pilot holes. Secure the main ceiling mount unit using the appropriate lag bolts for your ceiling type. Ensure the mount is firmly attached and level.
- For Wood Joists: Use a stud finder to locate the center of the wood joists. Mark and drill pilot holes. Secure the mount with lag bolts.
- Til betonlofter: Use a concrete drill bit to drill pilot holes. Insert concrete anchors (not included, but typically required for concrete installations) and then secure the mount with lag bolts.
Image: The motorized ceiling mount securely installed, demonstrating its robust construction and ability to support a TV.
Step 5: Hang the TV on the Ceiling Mount
Carefully lift the TV (with the attached bracket) and align the keyhole slots on the TV bracket with the corresponding bolts on the ceiling mount. Slide the TV into place and ensure it is securely seated. Partially tighten the bolts to allow for level adjustment.
Image: The TV is shown attached to the ceiling mount, demonstrating its ability to extend and retract, and highlighting the 75-degree tilt and ±2° leveling features.
Trin 6: Niveaujustering
Before fully tightening the bolts, use the manual ±2° leveling feature to fine-tune your TV's horizontal position. Once level, fully tighten all bolts to secure the TV in place.
Trin 7: Kabelstyring
Organize and secure all cables using the provided cable straps. This prevents cables from interfering with the motorized mechanism and ensures a clean, tidy appearance.
Image: A comparison illustrating effective cable management with the Perlegear mount, showing neatly secured cables, versus a cluttered appearance with unmanaged cables.
Betjeningsvejledning
The Perlegear Electric Ceiling TV Mount is operated using the included remote control.
- Udvid/Tilbage: Tryk på UP or NED buttons on the remote to extend or retract the TV. The mount offers a full expansion in approximately 32 seconds.
- Justering af hældning: The mount allows for a tilt range of 0° to 75°. Use the remote control to adjust the tilt angle to your preferred viewing stilling.
- Stopping at Any Angle: You can stop the movement at any desired angle by pressing any button on the remote during extension or retraction.
- Manual Leveling: After installation, if minor leveling adjustments are needed, use the manual ±2° leveling feature on the TV bracket.
Image: The remote control in use, demonstrating its sensitive operation and 33 ft range to adjust the TV's tilt from the ceiling.
Opretholdelse
- Regularly check that all screws and connections are tight and secure.
- Clean the mount and TV with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not lubricate the motorized parts unless specifically instructed by Perlegear customer support.
- Ensure cables remain properly managed and do not interfere with moving parts.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Mounten reagerer ikke på fjernbetjeningen. | Dead batteries in remote, power not connected. | Replace remote batteries. Check power adapter connection to mount and outlet. |
| Mount movement is jerky or stops. | Obstruction, overloaded weight. | Check for any obstructions. Ensure TV weight does not exceed 88 lbs. |
| TV'et er ikke i vater. | Leveling bolts not adjusted correctly. | Adjust the manual ±2° leveling bolts on the TV bracket. |
Garanti og kundesupport
Perlegear offers a comprehensive warranty for its products. For specific warranty details, product support, or any questions regarding installation or operation, please contact our U.S.-based product support team. Refer to the product packaging or the official Perlegear webhjemmeside for aktuelle kontaktoplysninger.
Kontakte: Please refer to the Perlegear official website or your purchase documentation for the most up-to-date customer support contact details.
