1. Introduktion
This manual provides comprehensive instructions for the safe and efficient use of the Creality Space PI Filament Dryer Plus and the Creality PLA Plus Filament. Please read this manual thoroughly before operating the device or using the filament to ensure optimal performance and longevity of your products.
Image 1.1: Creality Space PI Filament Dryer Plus and Creality PLA Plus Filament. This image displays the filament dryer unit alongside a spool of rainbow-colored PLA Plus filament and a 3D printed dragon model.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:
- Udsæt ikke enheden for vand eller fugt.
- Sørg for ordentlig ventilation under drift.
- Opbevares utilgængeligt for børn og kæledyr.
- Brug kun den medfølgende strømadapter.
- Do not open or attempt to repair the device yourself. Contact authorized service personnel.
- The heating element can become hot. Avoid direct contact during operation.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Creality Space PI Filament Dryer Plus Unit
- Strømadapter
- PTFE Tubes (2x)
- Creality PLA Plus Filament (1KG Rainbow)
- Brugervejledning (dette dokument)
4. Produktet er slutview
4.1. Dryer Components
Familiarize yourself with the main components of the Creality Space PI Filament Dryer Plus:
- LCD-berøringsskærm: Displays temperature, time, and filament type settings. Used for interaction and control.
- Kontrolknapper: Til navigering i menuer og justering af indstillinger.
- Filament Outlets: Two openings on the top for feeding filament to a 3D printer.
- Heating Chamber: Internal compartment where filament spools are placed for drying.
- PTC-varmer: Efficient heating element for uniform drying.
- Intern ventilator: Circulates hot air 360° for consistent drying.
Image 4.1: LCD Touch Screen and Controls. This image highlights the dryer's LCD touch screen interface, showing temperature and time settings, and indicating one-key set functionality for various filaments.
5. Opsætning
5.1. Udpakning
Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere opbevaring eller transport.
5.2. Strømtilslutning
Connect the provided power adapter to the dryer unit and then plug it into a suitable power outlet.
5.3. Filament Loading
The Space PI Filament Dryer Plus supports up to two 1KG filament spools simultaneously.
- Open the lid of the dryer unit.
- Place one or two filament spools onto the internal rollers. Ensure the filament unwinds smoothly.
- Thread the filament through the designated holes on the top of the dryer.
- Insert the PTFE tubes into the filament outlets to guide the filament to your 3D printer(s).
- Luk låget forsvarligt.
Image 5.1: Two Rolls Capacity Design. This image illustrates the dryer's capability to hold two 1KG filament spools, with filament being fed out through PTFE tubes to two separate 3D printers.
6. Betjening
6.1. Tænd/sluk
Press the power button to turn the dryer on or off. The LCD screen will illuminate upon powering on.
6.2. Basic Drying Process
The dryer features one-key temperature settings for various filament types and allows for custom adjustments.
- Vælg filamenttype: On the LCD touch screen, choose the appropriate filament type from the pre-set options. The dryer supports up to 12 types, including PLA, ABS, TPU, PETG, PP, PC, PA, PET, PLA-CF, PA-CF, PETG-CF, and ASA.
- Juster temperatur: The adjustable temperature range is 45°C to 70°C. You can use the pre-set values or manually adjust to your desired temperature.
- Indstil timer: The timer setting range is 0 to 48 hours. Select the recommended drying time for your filament or set a custom duration.
- Start tørring: Confirm your settings to begin the drying process. The PTC heater and internal fan will activate, circulating hot air 360° for uniform drying.
Image 6.1: Filament Compatibility and Recommended Drying Temperatures. This image displays the dryer's compatibility with 1.75mm and 2.85mm filaments and provides a table of recommended drying temperatures and times for various filament types.
Image 6.2: PTC Heater and 360° Hot Air Circulation. This image illustrates the internal PTC heating element and the fan-driven 360-degree hot air circulation system, designed for efficient and uniform filament drying.
6.3. Drying Multiple Filaments
When drying two spools, ensure both filaments are properly loaded and threaded through their respective PTFE tubes to their printers. The dryer will apply the selected settings to both spools.
7. Creality PLA Plus Filament Usage
7.1. Filament Characteristics
Creality Ender-PLA+ filament offers enhanced toughness and improved printing performance compared to standard PLA. Key characteristics include:
- Stronger Toughness: Less susceptible to breakage, allowing for repeated bending.
- Neat Winding: Full mechanical winding ensures tidy spools, reducing tangling and potential snaps.
- Improved Print Quality: Designed to minimize odor, bubbles, tangling, clogging, and cracking during printing.
Image 7.1: Creality PLA Plus Filament Benefits. This image lists the advantages of using Creality PLA Plus filament, including 'No Odor', 'No Bubble', 'No Tangling', 'No Clog', and 'No Cracking'.
Image 7.2: High Strength and Better Toughness. This image visually compares the flexibility and strength of Creality Ender PLA+ filament (shown bending without breaking) against common PLA filament (shown breaking easily).
Image 7.3: Neat Winding of Filament. This image demonstrates the precise and neat winding of the filament on the spool, highlighting an accuracy of ±0.02mm for the 1.75mm diameter.
7.2. Recommended Printing Parameters for PLA Plus
For optimal results with Creality PLA Plus filament, consider the following printing parameters:
- Extruder Temperature: 190-230°C
- Hotbed Temperature: No heating - 60°C
- Udskrivningshastighed: 40-100 mm/s
Image 7.4: Recommended Print Parameters for PLA Plus. This image displays the recommended extruder temperature (190-230°C), hotbed temperature (No heating - 60°C), and printing speed (40-100mm/s) for Creality Ender-PLA+ filament.
8. Vedligeholdelse
8.1. Rensning
To maintain the dryer's performance and appearance:
- Sørg for, at enheden er slukket og frakoblet før rengøring.
- Tør ydersiden af med en blød, tør klud.
- Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Periodically check the filament path for any debris and clear as needed.
8.2. Opbevaring
When not in use, store the dryer in a cool, dry place away from direct sunlight. If storing for extended periods, consider using the original packaging.
9. Fejlfinding
Hvis du støder på problemer, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Dryer does not power on | Ingen strømforsyning; Defekt strømadapter | Check power connection; Try a different outlet; Contact support if adapter is faulty. |
| Filamentet tørrer ikke effektivt | Incorrect temperature/time settings; Overly saturated filament | Verify settings against recommended values (Section 6.2); Extend drying time. |
| Filament tangling inside dryer | Improper loading; Filament cross-wound | Ensure filament is loaded correctly and unwinds freely; Manually untangle if necessary. |
| Displayet reagerer ikke | Midlertidig softwarefejl | Sluk og genstart enheden. |
10. Specifikationer
10.1. Creality Space PI Filament Dryer Plus
- Kapacitet: 2 rolls of 1KG filament spools
- Varmetype: 110W PTC-varmer
- Luftcirkulation: 360° hot air circulation with built-in fan
- Temperaturområde: 45°C - 70°C
- Timerområde: 0 - 48 timer
- Filament kompatibilitet: Supports 12 types including PLA, ABS, TPU, PETG, PP, PC, PA, PET, PLA-CF, PA-CF, PETG-CF, ASA. Compatible with 1.75mm and 2.85mm diameter filaments.
- Varens vægt: Approximately 2.2 pounds (unit only)
10.2. Creality PLA Plus Filament (1KG Rainbow)
- Materiale: Polylactic Acid (PLA+)
- Nettovægt: 1 kilo
- Diameter: 1.75mm (typical, check spool for exact)
- Diameter Accuracy: ±0.02 mm
- Farve: Regnbue
11. Garanti og support
For warranty information, technical support, or service inquiries, please contact Creality customer support through their official webwebstedet eller forhandleren, hvor produktet blev købt. Hav venligst din produktmodel og købsdato klar, når du kontakter support.
