PAL Lighting Evenglow 64-EGMIC-150 Treo Micro Nicheless Pool & Spa Light Brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PAL Lighting Evenglow 64-EGMIC-150 Treo Micro Nicheless Pool & Spa Light. Please read all instructions carefully before proceeding.

1.1. Produktet er slutview

The PAL Lighting Evenglow 64-EGMIC-150 Treo Micro is a multicolor nicheless LED light designed for pools and spas. It features 16 million colors, brightness control, and is designed for plug-and-play installation in any standard 1.5-inch wall fitting. The light operates on 12/24V DC and comes with a 150ft cable.

1.2. Sikkerhedsoplysninger

• Elektrisk sikkerhed: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before installation or servicing.
• Vanddybde: The underwater light should be installed in water depths between 2-12 inches (5-30.5 cm).
• Kabelintegritet: Do not cut or splice the factory-sealed cable. Any damage to the cable can compromise the waterproof seal and void the warranty.
• Voltage: Ensure the power supply matches the light's operating voltage of 12/24V DC.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før installationen påbegyndes.

• PAL Lighting Evenglow 64-EGMIC-150 Treo Micro Nicheless Pool & Spa Light with 150ft Cable
• Installationsmanual
• Gasket and Locking Tabs (for GloBrite replacement, if applicable)
• Installationsværktøj (hvis relevant)

Figure 1: The PAL Lighting Evenglow 64-EGMIC-150 pool light with its 150ft cable coiled.

Figure 2: The light head of the PAL Lighting Evenglow 64-EGMIC-150, shown detached from its cable, highlighting the connection point.

Figure 3: Close-up of the PAL Lighting Evenglow 64-EGMIC-150 light head and its waterproof cable connector.

3. Installation

The Evenglow 64-EGMIC-150 is designed for easy installation into a standard 1.5-inch threaded wall fitting. The light operates on 12/24V DC. Ensure the power supply is compatible and properly installed.

3.1. Generelle installationstrin

1. Prepare the Niche: Ensure the 1.5-inch wall fitting is clean and free of debris.
2. Før kablet: Carefully feed the 150ft cable through the conduit to the power source. Avoid kinking or damaging the cable.
3. Insert the Light: Thread the light fixture into the 1.5-inch wall fitting. Hand-tighten until snug. Do not overtighten.
4. Sikre lyset: Use the provided locking tabs or gasket (if applicable for your specific pool type, e.g., fiberglass) to secure the light firmly in place.
5. Elektrisk tilslutning: Connect the light's cable to a compatible 12/24V DC power supply. Ensure all connections are waterproof and meet electrical code requirements.

3.2. Installationsvideoreference

The following video demonstrates the installation process for a 1.5-inch pool light. While the specific product in the video may vary slightly from your PAL Lighting model, the general installation principles for a nicheless 1.5-inch light are applicable.

4. Betjening

Your PAL Lighting Evenglow Treo Micro light offers multiple color options and brightness control. Control can typically be achieved via a compatible remote control or a dedicated app, depending on your system configuration.

4.1. Color Modes and Brightness Control

• 16 millioner farver: Access a wide spectrum of colors to customize your pool or spa ambiance.
• Lysstyrkekontrol: Adjust the light intensity to suit your preference.
• Pre-programmed Modes: The light may include various pre-set color changing sequences (e.g., Party Mode, Romance Mode, Color Wash, Royal Mode) for dynamic lighting effects.

4.2. Fjernbetjening og app-styring

The light is designed to be controlled by a compatible multi-smart remote control or a smartphone application. Please refer to the specific instructions provided with your controller for detailed pairing and operation.

Note: While the product description indicates a remote control, some packages may require a separate purchase of a compatible controller for full functionality. Please check your product packaging.

4.3. Controller Demonstration Video

The following video demonstrates the use of a ColorSync Controller for pool lights. This provides a general understanding of how such controllers operate to change colors and modes.

5. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your pool light.

• Rensning: Periodically clean the light's lens to remove any algae, mineral deposits, or debris that may obstruct light output. Use a soft brush or cloth and mild pool-safe cleaning solutions.
• Inspektion: Regularly inspect the cable for any signs of wear, cuts, or damage. Check the light fixture for any cracks or loose components. Address any issues promptly to prevent water ingress.
• Vinterisering: If you winterize your pool, follow standard procedures for your region. Ensure the light remains submerged or is properly protected according to local guidelines.

6. Fejlfinding

If you encounter issues with your pool light, refer to the following common solutions:

7. Specifikationer

8. Garanti og support

For warranty information and technical support, please refer to the documentation included with your purchase or contact PAL Lighting directly through their official webwebstedet eller kundeservicekanaler. Gem din købsbevis til garantikrav.