Eliminator Lighting Bubbletron EXL Boblemaskine Brugermanual

Indledning

This manual provides essential information for the safe and efficient operation of your Eliminator Lighting Bubbletron EXL Bubble Machine. Please read these instructions thoroughly before initial use to ensure proper setup, operation, and maintenance.

Sikkerhedsoplysninger

Always observe the following safety precautions to reduce the risk of electrical shock, fire, or personal injury:

• Sørg for, at enheden er placeret på en stabil, plan overflade.
• Brug ikke enheden, hvis netledningen er beskadiget.
• Hold enheden væk fra vand eller andre væsker.
• Bloker ikke ventilationsåbninger.
• Use only approved bubble fluid.
• Tag stikket ud af stikkontakten før rengøring eller servicering.
• This device is for indoor use or covered outdoor use in dry conditions only.
• Opbevares utilgængeligt for børn.

Pakkens indhold

• Eliminator Bubbletron EXL Bubble Machine
• 9-foot/3M Wired Remote Control (Model: LC-3)
• Strømledning
• Brugervejledning (dette dokument)

Opsætning

1. Udpakning: Carefully remove the bubble machine from its packaging. Inspect for any damage during transit.
2. Placering: Place the unit on a flat, stable surface. Ensure adequate ventilation around the machine.
3. Væsketank: Locate the EZ-Access front fluid tank. Open the tank cover.
4. Fill with Fluid: Pour appropriate bubble fluid into the tank. Do not overfill; observe the MAX fill line.
5. Strømtilslutning: Connect the power cord to the unit's power input and then to a suitable electrical outlet (120V or 230V, depending on model).
6. Fjernbetjeningsforbindelse: Plug the wired remote control (LC-3) into the designated remote control input on the rear of the unit.

Billedbeskrivelse: An annotated diagram showing the top and rear views of the Eliminator Bubbletron EXL. Key components are labeled, including the Carrying Handle, EZ-Access Front Fluid Tank, Manual Bubble Switch, Input for Remote Control, Fuse, Power Cord, and Large Dual Fans.

Betjeningsvejledning

1. Tænd: Flip the ON/OFF switch located on the rear of the unit to the "ON" position.
2. Aktivér bobler:
   • Wired Remote Control (LC-3): Use the switch on the LC-3 remote control to turn the bubble production ON or OFF.
   • Manuel afbryder: If not using the remote, the manual bubble switch on the rear of the unit can be used to activate bubble production.
3. Bubble Production: The internal bubble wands will begin to rotate, and the dual high-velocity fans will disperse bubbles into the air.
4. Sluk: When finished, turn the bubble production OFF using the remote or manual switch, then flip the main ON/OFF switch on the rear of the unit to the "OFF" position. Unplug the power cord from the electrical outlet.

Billedbeskrivelse: The Eliminator Bubbletron EXL bubble machine in operation, emitting a large quantity of bubbles against a dark background with blue lighting, demonstrating its output capacity.

Opretholdelse

Regular maintenance ensures optimal performance and extends the lifespan of your bubble machine.

• Rengøring af væsketank: After each use, empty any remaining bubble fluid from the tank. Rinse the tank with distilled water to prevent residue buildup.
• Udvendig rengøring: Tør enhedens yderside af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Ventilatoråbninger: Periodically check the fan vents for dust or debris. Use a soft brush or compressed air to clean them.
• Opbevaring: Store the unit in a cool, dry place when not in use. Ensure the fluid tank is empty and clean before storage.

Fejlfinding

Specifikationer

Garanti og support

For warranty information and technical support, please contact Eliminator Lighting directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Kontaktoplysninger: Please refer to the official Eliminator Lighting webwebstedet eller produktemballagen for at få de mest aktuelle kontaktoplysninger til kundesupport.