Pxwaxpy HX45K8

Pxwaxpy Mini Bærbar Oplader Powerbank Brugermanual

Model: HX45K8

Indledning

Thank you for choosing the Pxwaxpy Mini Portable Charger Power Bank. This compact and powerful device is designed to provide convenient and fast charging for your iPhone on the go. With its 5200mAh capacity and 20W PD fast charging capability, you can keep your device powered throughout your day without the need for extra cables. This manual will guide you through the setup, operation, and maintenance of your new power bank.

Produkt overview

Nøglefunktioner

Pakkens indhold

Kompatibilitet

This portable charger is specifically designed for iPhone models with a Lightning port. It is compatible with:

Note: This power bank is NOT compatible with iPhone 15 Series or any USB-C devices.

Pxwaxpy Mini Portable Charger connected to an iPhone, showing 100% charge on its digital display.

Figure 1: Pxwaxpy Mini Portable Charger connected to an iPhone.

Compatibility chart showing various iPhone series (14, 13, 12/11, X, 8/7/6) and a reminder that USB-C devices are not applicable.

Figure 2: Compatibility details for the Pxwaxpy Mini Portable Charger.

Opsætning

Første opladning af powerbanken

  1. Locate the included USB-A to USB-C charging cable.
  2. Insert the USB-C end of the cable into the USB-C port on the side of the power bank.
  3. Tilslut USB-A-enden af ​​kablet til en kompatibel USB-vægadapter (medfølger ikke) eller en computers USB-port.
  4. The LCD digital display on the power bank will show the charging progress, indicating the battery percentage.
  5. Charge the power bank until the display shows 100% for optimal performance on first use. A full charge typically takes about 3 hours with a 5V/2A charger, or 1.5 hours with a 9V/2A quick charger.
Image showing the power bank being recharged via its USB-C port connected to a wall adapter, with text indicating 1.5 hours for 9V/2A quick charger and 3.0 hours for 5V/2A normal charger.

Figure 3: Recharging the Pxwaxpy Mini Portable Charger.

Betjeningsvejledning

Opladning af din iPhone

  1. Remove the protective cap from the Lightning connector on the power bank.
  2. Align the Lightning connector with your iPhone's charging port.
  3. Gently plug the power bank directly into your iPhone. Ensure a secure connection.
  4. The power bank will automatically begin charging your iPhone. The LCD display will show the remaining battery percentage af powerbanken.
  5. To stop charging, simply unplug the power bank from your iPhone.
Image showing a hand holding an iPhone with the Pxwaxpy Mini Portable Charger plugged directly into its charging port, highlighting cordless charging.

Figure 4: Direct charging of an iPhone using the power bank.

Genopladning af Power Bank

When the power bank's battery level is low, as indicated by the LCD display, recharge it using the provided USB-C cable as described in the "Initial Charging of the Power Bank" section. You can also charge the power bank while it is simultaneously charging your iPhone (pass-through charging).

Image illustrating pass-through charging, where the power bank is plugged into a wall charger via USB-C and an iPhone is plugged into the power bank, showing both devices charging.

Figure 5: Pass-Through Charging capability.

Vedligeholdelse og pleje

Fejlfinding

ProblemMulig årsagLøsning
Power bank not charging iPhone.Low battery on power bank; loose connection; incompatible iPhone model.Recharge the power bank; ensure the Lightning connector is fully inserted; verify iPhone model compatibility.
Powerbanken oplades ikke.Defekt opladningskabel eller adapter; løs forbindelse; funktionsfejl på powerbanken.Try a different USB-C cable and wall adapter; ensure the USB-C cable is fully inserted; contact customer support if the issue persists.
LCD-skærmen virker ikke.Power bank is off or completely drained; internal issue.Press the power button (if applicable, though this model seems to auto-activate); recharge the power bank; contact customer support.
Langsom opladning.Using a low-power adapter for recharging; iPhone battery health; background apps on iPhone.Use a 20W PD compatible wall adapter for faster recharging; close unnecessary apps on your iPhone.

Specifikationer

AttributDetalje
ModelnummerHX45K8
Batterikapacitet5200mAh
Udgang (Lyn)DC 5V=2A (for all iPhones)
Indgang/udgang (USB-C)DC 5V=3A (PD Type-C)
Produktdimensioner3.03 x 1.93 x 1.05 tommer
Varens vægt3.53 ounces (ca. 100 g)
FabrikantDongguan Yuanhaoxun Technology Co., Ltd
Image showing the compact size of the Pxwaxpy Mini Portable Charger next to a credit card and being placed into a small purse, with dimensions 3.03*1.45*1.05 inches and weight around 100g.

Figure 6: Dimensions and portability of the power bank.

Garanti og support

Pxwaxpy is committed to providing high-quality products and excellent customer service. Your Mini Portable Charger Power Bank comes with:

For support inquiries, please refer to the contact information provided on the product packaging or the official Pxwaxpy webwebsted.

Relaterede dokumenter - HX45K8

Preview Pxwaxpy HX200J2 Bærbar Powerbank Brugermanual
Brugervejledning til den bærbare powerbank Pxwaxpy HX200J2, der dækker funktioner, specifikationer, opladningsmetoder (USB og solcelleanlæg), LED-indikatorer, lommelygtefunktion og sikkerhedsadvarsler.
Preview Brugsanvisning: Pxwaxpy HX160Y1 Bærbar strømkilde
Detaljerede betjeningsvejledninger og specifikationer for den bærbare strømkilde Pxwaxpy HX160Y1 (powerbank), inklusive opladning, afladning, sikkerhedsfunktioner og advarsler.
Preview Brugsanvisning til bærbar strømkilde
Omfattende betjeningsvejledning til en bærbar strømkilde, med detaljerede oplysninger om produktfunktioner, opladningsmetoder (USB og solcelleanlæg), strømindikatorfunktioner og vigtige sikkerhedsmeddelelser og advarsler.