FLIPSKY FT85RS ESC User Manual

1. Introduktion

This manual provides comprehensive instructions for the FLIPSKY FT85RS ESC (Electronic Speed Controller) with Aluminum Case Water Cooling Enclosure. This high-performance ESC is designed for demanding applications such as E-Foils, fighting robots, surfboards, and AGV robots, offering robust power delivery and advanced control capabilities. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

2. Hvad er der i æsken

Når du åbner pakken, skal du kontrollere, at alle nedenstående komponenter er til stede og i god stand:

• FT85RS ESC With Aluminum Case Water Cooling Enclosure NON-VESC
• Various connection cables (USB, Hall sensor, PPM, ADC, CAN, Power switch)

Image 2.1: Contents of the FLIPSKY FT85RS ESC package, showing the main ESC unit, various connection cables, and a USB cable.

3. Specifikationer

The FLIPSKY FT85RS ESC boasts the following technical specifications:

Image 3.1: Physical dimensions of the FLIPSKY FT85RS ESC, indicating its length, width, and height.

4. Funktioner

Key features of the FLIPSKY FT85RS ESC include:

• Equipped with CPU AT32F403ARCT7 (ARM Cortex-M4 structure), enabling 240MHz CPU clock speed and max PWM switching frequency of 45KHz for improved motor RPM.
• Programmable via Flipsky ESC Tool for compatibility with various motor types, battery voltages, and control methods.
• Also programmable via Flipsky VX4 remote (Firmware Version: VX4_V1.2.1 or above).
• Supports FOC (Field-Oriented Control) for low working noise and smooth motor starting.
• Provides real-time data monitoring and fault alerts.
• Features adaptive variable PWM frequency control.
• Supports both sensored (HALL) and sensorless (IPDS, HFPI) modes.
• Supports Current and Duty Cycle control types.
• Includes multiple speed gear levels: Low, Medium, High, Reverse.
• Supports power on/off button switch or key switch.
• Integrated protection functions: low and high voltage protection, motor over-temperature protection (for NTC-10K-25℃ temperature sensing resistance only), battery over-discharge protection, MOSFETs over-current and over-temperature protection.

5. Sikkerhedsoplysninger

Adherence to safety guidelines is crucial for preventing damage to the ESC and ensuring user safety. Always observe the following:

• Ensure the firmware is V1.3 or above. Firmware updates can be performed via the Flipsky ESC Tool.
• Always disconnect power before making any connections or disconnections.
• Verify correct polarity for battery connections (BAT+ to positive, BAT- to negative). Incorrect polarity will cause severe damage.
• Operate the ESC within its specified voltage and current limits to prevent overheating and component failure.
• Ensure adequate cooling, especially when operating at high currents. The water cooling enclosure requires proper water circulation.
• Avoid short circuits on any terminals.
• Keep the ESC away from moisture, dust, and extreme temperatures.
• If any unusual behavior or smoke is observed, immediately disconnect power.

6. Opsætning og installation

Proper connection of the FT85RS ESC is vital for its functionality. Refer to the connection diagram below and follow these steps:

Image 6.1: Detailed connection diagram for the FLIPSKY FT85RS ESC, illustrating motor, battery, and various signal port connections.

1. Motor Connections (A, B, C): Connect the three phase wires from your motor to the corresponding A, B, and C terminals on the ESC. Ensure secure connections.
2. Battery Connections (BAT+, BAT-): Connect your battery's positive terminal to BAT+ (red wire) and negative terminal to BAT- (black wire). Double-check polarity before connecting.
3. Vandkøling: Connect your water cooling system to the designated inlet and outlet ports on the aluminum enclosure. Ensure proper water flow for effective heat dissipation.
4. Signal Port Connections: The multi-pin connector provides various signal interfaces:
   • 1. UART: For communication with external devices like remote controls (e.g., Flipsky VX4/VX3Pro) or data logging modules.
   • 2. HALL: For Hall sensor input from sensored motors (5V, TEMP, HALL1, HALL2, HALL3, GND).
   • 3. USB: Connect to a computer for programming and configuration using the Flipsky ESC Tool.
   • 4. ADC: Analog-to-Digital Converter inputs (GEAR-H, GEAR-M, GEAR-L, ADC2, ADC1, GND, 3.3V) for various analog sensor inputs or control signals.
   • 5. PPM: Pulse Position Modulation input for standard RC receiver connections (5V, SERVO, GND).
   • 6. CAN/POWER: CAN bus communication (RX, TX, 5V, H, L, GND) and power switch connection (PWR.ON, 5V, H, L, GND).
   • 7. STRØMKNAPP: Dedicated port for connecting the external power switch (GND, IGNITE, BAT+).
5. Indledende konfiguration: After physical connections, connect the ESC to your computer via USB and use the Flipsky ESC Tool to configure motor parameters, battery settings, and control modes according to your specific application.

Billede 6.2: Bund view of the FT85RS ESC, highlighting the two water cooling ports for connecting the cooling system.

7. Betjeningsvejledning

Once the FT85RS ESC is properly installed and configured, follow these general operating guidelines:

• Tænd: Use the connected power switch to turn on the ESC. Observe any indicator lights for status.
• Fjernbetjening: If using a compatible Flipsky remote (VX4, VX3Pro), ensure it is paired and configured correctly.
• Kontroltilstande: The ESC supports Current and Duty Cycle control types. Select the appropriate mode via the Flipsky ESC Tool based on your application requirements.
• Speed Gear Levels: Utilize the programmable speed gear limits (Low, Medium, High, Reverse) to manage motor speed and torque according to your needs. These can typically be switched via your remote or external input.
• Overvågning: The ESC provides real-time data. Monitor parameters like voltage, current, temperature, and RPM through the Flipsky ESC Tool or compatible display units to ensure safe operation.
• Nedlukning: Always power off the ESC using the designated power switch after use.

8. Vedligeholdelse

Regular maintenance helps prolong the lifespan and ensure reliable performance of your FT85RS ESC:

• Rensning: Periodically clean the exterior of the ESC to remove dust, dirt, and debris. Use a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Tilslutningskontrol: Regularly inspect all electrical connections (motor, battery, signal wires) for looseness, corrosion, or damage. Secure any loose connections.
• Vandkølesystem: Ensure the water cooling system is free of blockages and that water flows efficiently. Flush the system if necessary to prevent buildup.
• Firmwareopdateringer: Check the Flipsky website or ESC Tool for available firmware updates. Keeping the firmware up-to-date can improve performance and add new features.
• Opbevaring: When not in use for extended periods, store the ESC in a cool, dry place, away from direct sunlight and extreme temperatures.

9. Fejlfinding

If you encounter issues with your FT85RS ESC, consider the following troubleshooting steps:

For more detailed diagnostics and advanced troubleshooting, refer to the Flipsky ESC Tool software and online resources provided by FLIPSKY.

10. Garanti og support

FLIPSKY products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please visit the official FLIPSKY webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Official FLIPSKY Webwebsted: www.flipsky.net