Tru-Bolt 440-3350

Tru-Bolt Amherst oliegnidet bronze dørhåndtag, brugsanvisning

Model: 440-3350

For installation, operation, and maintenance

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Tru-Bolt Amherst Oil Rubbed Bronze Entry Door Handleset, Model 440-3350. Please read these instructions carefully before beginning installation to ensure proper function and longevity of your product. Keep this manual for future reference.

Produkt overview

The Tru-Bolt Amherst Entry Door Handleset features a transitional farmhouse design with an oil rubbed bronze finish. It is designed for standard size doors and includes an adjustable throughbolt and backset for flexible installation.

Nøglefunktioner:

  • Transitional farmhouse design with an oil rubbed bronze finish.
  • Adjustable throughbolt for flexible positioning.
  • Compatible with all standard size doors.
  • Robust metalkonstruktion for holdbarhed.
  • Adjustable backset fits doors 1-3/8" to 1-3/4" thick.

Pakkens indhold

Kontroller venligst, at alle komponenter er til stede, før installationen påbegyndes:

  • Exterior Handleset Assembly
  • Interior Knob/Lever Assembly
  • Installation Hardware (screws, spindle, etc.)
  • Note: Strike plate is not included and must be purchased separately if needed.

Sikkerhedsoplysninger

  • Brug altid passende sikkerhedsudstyr, såsom handsker og øjenbeskyttelse, under installationen.
  • Ensure all screws are tightened securely to prevent loosening over time.
  • Hold små dele væk fra børn.
  • Hvis du er usikker på et trin, skal du kontakte en kvalificeret fagperson.

Opsætning og installation

Before you begin, ensure your door is prepared with the necessary bore holes and backset. This handleset is designed for doors 1-3/8" to 1-3/4" thick.

Nødvendige værktøjer (ikke inkluderet):

  • Phillips hovedskruetrækker
  • Målebånd
  • Blyant

Installationstrin:

  1. Forbered døren: Ensure the door has standard bore holes and the correct backset. The adjustable backset feature allows for flexibility.
  2. Installer låsebolten: Insert the latch bolt into the edge bore hole of the door. Secure it with screws. Ensure the bevel of the latch faces the door frame.
  3. Installer udvendigt håndtag: Position the exterior handleset (the part with the long handle) onto the door, aligning the spindle through the latch bolt. The adjustable throughbolt allows for precise alignment.
  4. Exterior Tru-Bolt Amherst Handleset in Oil Rubbed Bronze

    Billede 1: Udvendigt view of the Tru-Bolt Amherst Oil Rubbed Bronze Entry Door Handleset. This shows the main handle and the upper lock mechanism.

  5. Install Interior Knob/Lever: Place the interior knob or lever assembly onto the door, aligning it with the exterior handleset and the spindle.
  6. Interior Tru-Bolt Amherst Knob in Oil Rubbed Bronze

    Billede 2: Interiør view of the Tru-Bolt Amherst Oil Rubbed Bronze knob. This is the component that goes on the inside of the door.

  7. Secure Assemblies: Use the provided installation hardware (screws) to securely fasten the interior and exterior assemblies together. Ensure the handleset operates smoothly before fully tightening all screws.
  8. Test drift: Close the door and test the latching and locking mechanisms to ensure proper function.

Betjeningsvejledning

  • Sådan åbnes udefra: Insert the correct key into the cylinder and turn to unlock. Depress the thumb-latch to retract the latch bolt.
  • Sådan åbnes indefra: Turn the interior knob/lever to retract the latch bolt.
  • Sådan låses udefra: Use the key to engage the deadbolt (if paired with one) or the handleset's locking mechanism.
  • Sådan låses indefra: Use the turn-button or lever on the interior knob/lever to engage the lock.

Opretholdelse

  • Rensning: Clean the handleset with a soft, damp cloth. Avoid abrasive cleaners, solvents, or polishing agents, as these can damage the oil rubbed bronze finish.
  • Smøring: Periodically apply a small amount of graphite lubricant to the keyway if the lock mechanism feels stiff. Do not use oil-based lubricants.
  • Inspektion: Regularly check all screws for tightness and ensure the handleset operates smoothly. Tighten any loose screws as needed.

Fejlfinding

ProblemMulig årsagLøsning
Handleset is stiff or hard to turn.Lack of lubrication; misaligned components.Apply graphite lubricant to the keyway. Check for proper alignment during installation.
Låsebolten trækkes ikke helt ind.Screws too tight; latch bolt misaligned.Loosen mounting screws slightly and re-test. Ensure latch bolt is installed correctly.
Handleset feels loose.Monteringsskruerne er løse.Spænd alle synlige monteringsskruer.

Specifikationer

FeatureDetalje
MærkeTru-Bolt
Modelnummer440-3350
FarveBronze
StilOvergangsbestemt
SlutteOlie gniddet
MaterialeMetal
Håndtag TypeLever (Interior Knob/Lever)
Antal stykker2 (Handleset and Interior Knob/Lever)
Særlige funktionerAdjustable throughbolt, Adjustable backset
Dørtykkelseskompatibilitet1-3/8" to 1-3/4"
Produktdimensioner30.35 x 7.01 x 7.01 cm (ca. 11.95 x 2.76 x 2.76 tommer)
Inkluderede komponenterInstallationshardware

Garanti og support

For information regarding warranty coverage or technical support, please refer to the official Tru-Bolt webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købsbevis til garantikrav.

Bemærk: Specifikke garantivilkår kan variere afhængigt af region og forhandler.

Relaterede dokumenter - 440-3350

Preview Tru-Bolt Genesis elektronisk dødbolt installations- og programmeringsvejledning
Omfattende vejledning til installation og programmering af Tru-Bolt Genesis elektronisk dødbolt med biometrisk berøringsskærm og adgangshåndtag. Dækker installation af dødbolt, installation af håndtag, udskiftning af batteri og programmering af brugerkoder og fingeraftryk.
Preview Tru-Bolt Gemini biometrisk deadbolt installations- og programmeringsvejledning
Omfattende vejledning til installation og programmering af Tru-Bolt Gemini biometrisk aktiveret dødbolt med tastatur, inklusive oplysninger om opsætning, fejlfinding og garanti.
Preview Tru-Bolt Classic digitalt håndtag med tastatur installations- og programmeringsvejledning
Omfattende vejledning til installation og programmering af Tru-Bolt Classic digitalhåndtag med tastatur, inklusive fejlfinding og garantioplysninger.
Preview Installations- og brugervejledning til Tru-Bolt Luna biometrisk aktiveret deadbolt
Omfattende guide til installation og betjening af Tru-Bolt Luna biometrisk aktiveret dødbolt, inklusive opsætning, app-integration og fejlfinding.
Preview TRU-BOLT Orion Wi-Fi Deadbolt installations- og programmeringsvejledning
Omfattende vejledning til installation, programmering og fejlfinding af TRU-BOLT Orion Wi-Fi-aktiveret dødbolt med tastatur (model 1743010, 1743011). Indeholder trinvise instruktioner, app-opsætning, fejlfindingstips og garantioplysninger.
Preview Tru-Bolt Orion Wi-Fi Deadbolt installations- og programmeringsvejledning
Omfattende vejledning til installation og programmering af Tru-Bolt Orion Wi-Fi-aktiveret dødbolt med tastatur. Indeholder trinvise instruktioner, fejlfindingstips og garantioplysninger.