Indledning
This manual provides essential information for the safe and effective installation, operation, and maintenance of your HELLA 2JA 959 037-801 Warning Light. Please read this manual thoroughly before use and retain it for future reference.
Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:
- Ensure the vehicle's power supply is disconnected before installation.
- Installation should be performed by qualified personnel to ensure correct wiring and mounting.
- Produktet må ikke ændres på nogen måde, da dette kan ugyldiggøre garantien og kompromittere sikkerheden.
- Kontroller, at driftsvoltage of the vehicle matches the product's specifications (9-33V).
- Securely mount the warning light to prevent detachment during vehicle operation.
Produkt overview
The HELLA 2JA 959 037-801 is an LED warning light designed for various automotive applications. It features a robust construction and a green lens, providing a clear flashing warning signal.
Figure 1: HELLA 2JA 959 037-801 Warning Light. This image displays the rectangular warning light with a prominent green LED lens in the center, flanked by yellow end caps.
Nøglefunktioner:
- LED-teknologi: Energy-efficient and long-lasting illumination.
- Flashing Warning Signal: Designed for clear visibility and safety.
- Wide Voltage Område: Operates on 9-33V DC systems.
- Robust beskyttelse: IP 6K6 and IP 6K7 rated for dust and water ingress.
- Omvendt polaritetsbeskyttelse: Safeguards against incorrect wiring.
- Omprogrammerbar: Functionality can be adjusted as needed.
Specifikationer
| Attribut | Værdi |
|---|---|
| Modelnummer | 2JA 959 037-801 |
| OEM Reference Number | 2JA 959 037-801 |
| VoltagRækkevidde | 9-33 V |
| Strømforbrug | 9 W |
| Lys design | LED |
| Lys funktion | Flashing warning signal |
| Linse farve | Grøn |
| Monteringstype | boltet |
| Kabellængde | 2500 mm |
| Mål (L x B x D) | 20.8 cm x 177 mm x 31 mm (Length x Width x Depth) |
| Højde | 100 mm |
| Vægt | 0.5 kg |
| Protection Type (IP Code) | IP 6K6, IP 6K7 |
| Test Mark | EMC, Fulfils ECE norm: R10 |
| Omvendt polaritetsbeskyttelse | Ja |
| Omprogrammerbar | Ja |
Opsætning og installation
- Forbered til installation:
- Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shock or short circuits.
- Choose a suitable mounting location that provides clear visibility for the warning light and allows for secure bolted mounting.
- Montering af lyset:
- The warning light is designed for bolted mounting. Use appropriate fasteners (not included) to secure the unit firmly to the chosen surface.
- Ensure the mounting surface is flat and strong enough to support the light and withstand vehicle vibrations.
- Ledningsforbindelser:
- The light comes with a 2500 mm cable. Connect the positive (+) wire to a switched power source within the 9-33V range.
- Connect the negative (-) wire to a suitable vehicle ground.
- The unit features reverse polarity protection, but correct wiring is always recommended.
- Ensure all connections are secure and insulated to prevent corrosion and short circuits.
- Endelig kontrol:
- Once mounted and wired, reconnect the vehicle battery.
- Test the warning light to ensure it functions correctly, emitting a clear flashing signal.
Betjeningsvejledning
The HELLA 2JA 959 037-801 Warning Light is designed for straightforward operation.
- Aktivering: The warning light will activate when power is supplied to its connected circuit. This is typically controlled by a switch in the vehicle's cabin.
- Flashing Signal: Upon activation, the LED light will emit a flashing warning signal.
- Omprogrammering: This unit can be reprogrammed. Refer to specific HELLA programming tools and software for details on how to adjust flash patterns or other functionalities. This typically requires specialized equipment and knowledge.
Opretholdelse
The HELLA 2JA 959 037-801 Warning Light requires minimal maintenance due to its durable design and LED technology.
- Rensning: Periodically clean the lens with a soft, damp cloth and mild soap solution to ensure maximum light output. Avoid abrasive cleaners or solvents.
- Inspektion: Regularly check the mounting bolts for tightness and inspect the wiring for any signs of wear, damage, or corrosion.
- Skade: If the housing or lens is damaged, the unit's IP rating may be compromised. Replace damaged units promptly.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset lyser ikke. | No power supply, faulty wiring, blown fuse, incorrect voltage. | Check power connections, vehicle fuse box, and ensure voltage is within 9-33V. Verify wiring for continuity. |
| Lyset flimrer eller er svagt. | Løs forbindelse, utilstrækkelig lydstyrketage, damaged wiring. | Inspect all wiring connections for tightness. Check vehicle's electrical system for stable voltage output. |
| Light pattern is incorrect or inconsistent. | Internal fault, incorrect reprogramming. | If recently reprogrammed, verify the programming steps. If not, contact HELLA technical support for assistance. |
| Fugt inde i linsen. | Compromised seal due to damage or improper installation. | Inspect the unit for cracks or damage. Ensure mounting is secure and not causing stress on the housing. Replace if seal is compromised. |
Garanti og support
For warranty information and technical support, please refer to the official HELLA website or contact your authorized HELLA distributor. Keep your purchase receipt as proof of purchase.
