VINGLI Cloud Criss Cross Legged Office Chair (Model CCC-001) Instruction Manual

1. Introduktion

Thank you for choosing the VINGLI Cloud Criss Cross Legged Office Chair. This manual provides detailed instructions for the assembly, operation, and maintenance of your new chair. Designed for ultimate comfort and versatility, this chair features an 18-inch high backrest, a 5.7-inch thick, 24-inch wide padded seat, and three-layer upholstery for superior comfort. Its armless design and 360° swivel functionality make it suitable for various environments, from home offices to vanity setups. Please read this manual carefully before assembly and use to ensure proper function and longevity of your product.

2. Sikkerhedsoplysninger

WARNING: Do not exceed the maximum load capacity of 330 lbs. Full product packaging and documentation may contain additional safety warnings. Always ensure all bolts are fully tightened before using the chair. Regularly check and tighten all bolts every 6 months or whenever needed.

3. Pakkens indhold

Kontroller venligst, at alle komponenter er til stede og ubeskadigede, før du begynder monteringen. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Seat Cushion (A)
• Ryglæn (B)
• Base Plate (C)
• Gas Lift Cylinder (D)
• Star Base (E)
• Legs (F) x 5
• Wheels (G) x 5 (or Foot Pads (H) x 5, depending on model)
• Backrest Support Bracket (I)
• Screws (K, L, M)
• Allen Wrench (N)

Image: All chair components laid out for inspection.

4. Opsætning og montering

Assembly is designed to be straightforward and can typically be completed in 15 minutes. All necessary hardware and tools are included.

1. Assemble the Star Base: Attach the five legs (F) to the central star base (E) using the provided screws (K or L) and Allen wrench (N). Ensure they are securely tightened.
2. Install Wheels/Foot Pads: Firmly push the five wheels (G) or foot pads (H) into the ends of each leg until they click into place. Make sure there is no gap.
3. Indsæt gasløft: Insert the gas lift cylinder (D) into the center hole of the assembled star base (E).
4. Fastgør bundpladen til sædet: Align the base plate (C) with the bottom of the seat cushion (A), ensuring the

   Relaterede dokumenter - CCC-001

   	VINGLI Armless Adjustable Rolling Office Chair Assembly Instructions Step-by-step assembly instructions for the VINGLI Armless Adjustable Rolling Office Chair, including parts list and installation guide.
   	VINGLI Office Chair Assembly and Care Instructions A comprehensive guide for assembling, using, and maintaining your VINGLI office chair, including important safety information and care tips.
   	VINGLI Podium Assembly Instructions | Mobile Desk Setup Guide Detailed assembly instructions for the VINGLI Podium, a versatile mobile desk or stand. This guide includes a complete list of components, step-by-step assembly procedures, and customer support contact information for VINGLI products.
   	VINGLI Moderne Accentstol Samlevejledning Step-by-step assembly guide for the VINGLI Modern Accent Chair, including parts list, hardware details, customer service, and return policy.
   	VINGLI 3-in-1 Convertible Sleeper Chair Instruction Manual Assembly and usage instructions for the VINGLI 3-in-1 Convertible Sleeper Chair, including pre-assembly information, component lists, step-by-step assembly guides, and operating instructions.
   	VINGLI Moderne Accentstol Samlevejledning Trin-for-trin samlevejledning til VINGLI Modern Accent Chair, inklusive stykliste og samletrin.