1. Sikkerhedsoplysninger
Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Opbevares utilgængeligt for børn.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
- Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
- Efterlad ikke pumpen uden opsyn under drift.
- Avoid exposing the inflator to rain or moisture.
- Do not attempt to disassemble or modify the device. Contact customer support for assistance.
- Brug kun det medfølgende opladningskabel og tilbehør.
- Opbevar pumpen et køligt og tørt sted, når den ikke er i brug.
2. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- 1x SYNCWIRE SW2002 Portable Tire Inflator
- 1x Air Hose
- 1x USB-C opladerkabel
- 1x opbevaringspose
- 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
- 4x Car Tire Valve Caps
- 1x Brugermanual (dette dokument)
- 1x Warranty Policy
Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.
3. Produktet er slutview
3.1 Nøglefunktioner
- High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
- Stort LCD-display: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
- Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
- Automatisk slukning: Stopper automatisk oppustningen, når det forudindstillede tryk er nået.
- Flere oppustningstilstande: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
- Alsidige enheder: Supports PSI, KPA, BAR, and KG/CM².
- Indbygget LED lommelygte: Giver belysning til brug under forhold med svagt lys.
- Nødstrømbank: USB output port allows charging of mobile devices.
- Kompakt og bærbar: Designet til nem opbevaring og transport.
3.2 Enhedslayout
Billede: Forside view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.
- LCD-skærm: Shows current and target pressure, battery level, and selected mode.
- Mode knap: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
- Power knap: Turns the device on/off and starts/stops inflation.
- +/- knapper: Adjusts preset pressure values.
- Enhedsknap: Changes pressure units (PSI, KPA, BAR, KG/CM²).
- LED lys knap: Aktiverer/deaktiverer den indbyggede lommelygte.
- Luftslangeport: Connects the air hose to the inflator.
- USB-C-indgang: Til opladning af inflatoren.
- USB-A-output: Til brug af oppusteren som powerbank.
4. Opsætning
4.1 Opladning af pumpen
- Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
- Connect the other end of the cable to a compatible USB power adapter (not included) or a USB port.
- The battery indicator on the LCD display will flash during charging and become solid when fully charged.
- A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.
4.2 Attaching the Air Hose and Nozzle
- Screw the air hose securely into the air hose port on the top of the inflator.
- Select the appropriate nozzle adapter for the item you wish to inflate.
- Screw the chosen nozzle adapter onto the free end of the air hose.
5. Betjeningsvejledning
5.1 Tænd/sluk
- Tryk og hold på Power knap for 3 seconds to turn the inflator on.
- The LCD display will light up, showing the current battery level and default mode.
- For at slukke, tryk og hold nede Power knap for 3 seconds again, or the device will automatically shut off after a period of inactivity.
5.2 Valg af oppustningstilstand og -enhed
Image: The inflator's LCD screen displaying various preset inflation modes.
- Efter tænding skal du trykke på Mode knap to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
- Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
- Tryk på Enhedsknap to switch between pressure units: PSI, KPA, BAR, KG/CM².
5.3 Indstilling af ønsket tryk
- Once a mode is selected, the preset pressure value will flash on the LCD.
- Brug + og - buttons to adjust the desired target pressure.
- Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.
5.4 Start og stop af oppustning
Image: The inflator actively inflating a car tire, demonstrating its speed.
- Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
- Tryk på Power knap to start inflation. The real-time pressure will be displayed.
- The inflator will automatically stop once the preset pressure is reached.
- To manually stop inflation, press the Power knap igen.
- Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.
5.5 Brug af LED-lommelygten
- Tryk på LED lys knap for at tænde lommelygten.
- Press again to cycle through different light modes (e.g., steady, SOS, flashing).
- Press a third time to turn off the flashlight.
5.6 Powerbankens funktion
Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.
- Connect your device's charging cable to the USB-A output port on the inflator.
- The inflator will begin charging your device. This function is useful for emergencies.
6. Vedligeholdelse
6.1 Rengøring
- Ensure the inflator is turned off and disconnected from any power source before cleaning.
- Tør ydersiden af med en blød, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Keep the air intake and exhaust vents clear of dust and debris.
6.2 Opbevaring
- Store the inflator and its accessories in the provided storage bag.
- Opbevar enheden et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
- For prolonged storage, charge the inflator every 3-6 months to maintain battery health.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Inflatoren tænder ikke. | Lavt batteri. | Charge the inflator fully. |
| Inflator stops prematurely. | Forudindstillet tryk nået. | This is normal operation. Check the pressure reading. |
| Overophedning. | Allow the device to cool down for 10 minutes before resuming use. | |
| Slow inflation or no air output. | Air hose or nozzle not securely connected. | Sørg for, at alle forbindelser er tætte. |
| Incorrect nozzle adapter used. | Select the correct adapter for the item. | |
| Unøjagtige trykaflæsninger. | Incorrect pressure unit selected. | Press the Unit Button to select the desired unit (PSI, KPA, BAR, KG/CM²). |
| Sensorblokering. | Ensure the air hose and valve are clear of debris. |
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnavn | SW2002 |
| Mærke | SYNCWIRE |
| Maksimalt tryk | 150 PSI |
| Luftmængde kapacitet | 18 liter i minuttet |
| Strømkilde | Batteridrevet |
| Driftstilstand | Automatisk |
| Slange længde | 9.05 tommer |
| Varens vægt | 1.05 pund |
| Produktmål (LxBxH) | 5.29 cm x 2.93 cm x 1.85 cm |
| Materiale | Durable, Reliable |
| Farve | Sort |
9. Garanti og support
SYNCWIRE provides a 36 måneders garanti for the SW2002 Portable Tire Inflator.
For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.
Please refer to the included Warranty Policy document for detailed terms and conditions.
