Indledning
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Metal Twin Bed Frame (Model YT-00136885). Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Sikkerhedsoplysninger
Vigtige sikkerhedsforanstaltninger:
- Do not load more than 204 kg (450 lb) onto the bed frame.
- Carefully follow all assembly instructions to prevent instability or collapse.
- Vær forsigtig omkring skarpe kanter under montering og brug.
- Ensure the bed frame is securely assembled to prevent unintended movement.
- Hold små dele væk fra børn under montering.
Reservedelsliste
Before assembly, verify that all components listed below are present and undamaged. Refer to the assembly video for visual identification of parts.
Frame Components:
- Hovedgærde- og fodgærdesektioner
- Sideskinner
- Center Support Beam with legs
- Metallameller
Hardware:
- Various bolts, nuts, and washers (as per included hardware pack)
- Hex key and wrench (provided for assembly)
Monteringsvejledning
Follow these steps to assemble your Yaheetech Metal Twin Bed Frame. It is recommended to assemble the bed frame on a soft, clean surface to prevent scratches.
Videovejledning til montering:
Video 1: Step-by-step assembly guide for the Yaheetech Metal Bed Frame. This video demonstrates the complete assembly process from unboxing to the final structure.
Step-by-Step Written Instructions:
- Saml hovedgærdet og fodgærdet:
Attach the vertical support posts to the decorative headboard/footboard panels using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until all parts are aligned.
Figure 2: Detail of the headboard's curved design, showing the attachment points for the vertical posts. - Fastgør sideskinner:
Connect the side rails to the assembled headboard and footboard sections. Use the appropriate bolts and washers, ensuring the side rails are correctly oriented. Hand-tighten bolts initially.
- Installer centerstøttebjælke:
Position the center support beam, including its legs, in the middle of the frame. Secure it to the side rails using the designated hardware. This beam provides additional stability.
Figure 3: Illustration of L-shaped plates used to fasten frame components, enhancing structural stability. - Placering af metallameller:
Lay the metal slats across the frame, fitting them into the designated slots on the side rails. Ensure all slats are evenly spaced and securely seated. The side rails are designed to be higher than the inserted slats to prevent mattress movement.
Figure 4: Detail showing the built-in metal slats and the raised side rail design, which helps to keep the mattress in place. - Endelig stramning:
Once all components are in place and aligned, use the provided hex key and wrench to fully tighten all bolts. Do not overtighten. Verify the frame is stable and level.
Produktegenskaber
- Holdbar konstruktion: Crafted from heavy-duty powder-coated metal for long-lasting use.
- Integrated Headboard and Footboard: Features a curved design that adds to the aesthetic and helps secure bedding.
- Ingen boxmadras nødvendig: The metal slat system provides direct support for your mattress.
- Mattress Retention: Side rails are designed to be higher than the slats, preventing the mattress from sliding.
- Opbevaring under sengen: Offers approximately 13 inches of clearance beneath the frame for storage solutions.
- Squeak Resistant: Engineered for a stable and quiet sleep experience.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Yaheetech |
| Modelnummer | YT-00136885 |
| Størrelse | Tvilling |
| Farve | Sort |
| Materiale | Metal |
| Produktmål (L x B x H) | 196.5 x 104.5 x 88.5 cm (77.5 x 41 x 35 tommer) |
| Varens vægt | 13.2 kg (29.2 lb) |
| Maksimal vægtkapacitet | 204 kg (450 lb) |
| Frihøjde | 13 tommer |
| Kompatibel madrasstørrelse | Dobbeltseng (75" x 39") |
| Særlige funktioner | Curved Design Headboard, No Box Spring Needed, Squeak Resistant, Sturdy, Under Bed Storage |
Opretholdelse
For at sikre din sengerammes levetid og optimale ydeevne, skal du følge disse vedligeholdelsesretningslinjer:
- Rensning: Tør metalrammen af med en blød kludamp klud. Undgå slibende rengøringsmidler eller barske kemikalier, der kan beskadige overfladen.
- Stram fastgørelsesanordninger: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent squeaking.
- Undgå overbelastning: Do not exceed the maximum weight capacity of 204 kg (450 lb) to prevent structural damage.
- Flytning: Når du flytter sengerammen, skal du løfte den i stedet for at trække den for at undgå at beskadige rammen eller gulvet.
Fejlfinding
Hvis du støder på problemer med din sengeramme, kan du se følgende almindelige problemer og løsninger:
- Knirkende lyde:
Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard/footboard and the center support beam.
- Frame Instability/Wobbling:
Ensure all bolts are fully tightened. Verify that the center support legs are making firm contact with the floor. Check that all frame components are correctly aligned as per the assembly instructions.
- Madrasglidende:
The bed frame is designed with raised side rails to minimize mattress sliding. Ensure the mattress is correctly positioned within the frame. If sliding persists, consider using a non-slip mattress pad.
Garanti og support
For warranty information or technical support, please refer to the documentation included with your purchase or contact Yaheetech customer service directly. Contact details can typically be found on the manufacturer's webwebstedet eller din købskvittering.
