Sachtler System Ace M GS Mk II 2 Stage Aluminium Tripod

1. Produktet er slutview

The Sachtler Ace M GS Mk II is a lightweight and compact 2-stage aluminium tripod system designed for precision and consistent performance. It supports camera rigs weighing up to 4kg (8.8lbs) and features fast counterbalance and smooth drag adjustments. This system is ideal for various shooting environments, from urban settings to outdoor locations.

Nøglefunktioner:

• Ace M system with 2-stage aluminium tripod
• Supports payloads up to 4kg (8.8lbs)
• Five steps of counterbalance for quick payload matching
• Height range: 22.83 inches (58 cm) to 68.11 inches (173 cm)
• 104mm (4.1in) sliding range for the balance plate
• Includes Ace bag, ground spreader, and carry handle

Figure 1: Sachtler System Ace M GS Mk II Tripod with included carrying bag.

2. Opsætningsvejledning

Follow these steps to set up your Sachtler Ace M GS Mk II tripod system:

1. Udpak komponenter: Carefully remove all components from the packaging, including the tripod legs, fluid head, quick release plate, ground spreader, and carrying bag.
2. Fastgør væskehoved: Ensure the fluid head is securely mounted to the tripod legs. The Ace M head is typically pre-attached to the tripod legs for this system.
3. Deploy Tripod Legs: Extend the tripod legs to the desired height. Loosen the leg locks, extend the sections, and then firmly tighten the locks. Ensure all leg sections are fully extended and locked for maximum stability.
4. Attach Ground Spreader: If using the ground spreader, attach it to the base of the tripod legs. This provides additional stability on flat surfaces.
5. Monter kamera: Attach your camera to the quick release plate. Slide the quick release plate into the fluid head until it clicks securely into place. Ensure the camera is balanced on the head before releasing dit greb.

Figure 2: The Sachtler Ace M GS Mk II Tripod fully extended, ready for camera mounting.

3. Betjeningsvejledning

Operating the Sachtler Ace M GS Mk II involves adjusting the fluid head for optimal camera movement and stability.

1. Balancejustering: The Ace M head features five steps of counterbalance. Rotate the counterbalance dial (typically numbered 0-4 or 0-5) to match the weight of your camera rig. Start with a lower setting and increase until the camera remains level when tilted without being held.
2. Trækjustering: The fluid head offers smooth pan and tilt drag adjustments. Use the dedicated pan and tilt drag knobs to set the desired resistance for horizontal (pan) and vertical (tilt) movements. A higher setting provides more resistance for smoother, slower movements.
3. Camera Plate Sliding Range: The balance plate has a 104mm (4.1in) sliding range. Loosen the plate lock and slide the camera forward or backward to achieve perfect balance, especially with accessorized cameras. Tighten the plate lock firmly once balanced.
4. Pan Bar: Attach the pan bar to the fluid head for precise control over pan and tilt movements. Adjust its angle for comfortable operation.

Figur 3: Detaljeret view of the Sachtler Ace M fluid head, showing counterbalance and drag controls.

Figur 4: Side view of the Sachtler Ace M fluid head, highlighting the quick release plate lever and additional controls.

4. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your Sachtler Ace M GS Mk II tripod system.

• Rensning: After each use, especially in dusty or sandy environments, wipe down the tripod legs and fluid head with a soft, dry cloth. For stubborn dirt, a slightly damp en klud kan bruges, efterfulgt af øjeblikkelig tørring. Undgå skrappe kemikalier eller slibende rengøringsmidler.
• Smøring: The fluid head is factory-lubricated. Do not attempt to lubricate internal components yourself. If movements become stiff or noisy, contact Sachtler customer support.
• Opbevaring: Store the tripod in its included carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure all locks are loosened slightly during long-term storage to prevent stress on components.
• Inspektion: Periodically inspect all screws, bolts, and leg locks for tightness. Ensure the quick release plate mechanism functions smoothly and securely.

5. Fejlfinding

This section addresses common issues you might encounter with your Sachtler Ace M GS Mk II tripod.

• Problem: Stativet er ustabilt.
  Løsning: Ensure all leg locks are fully tightened. Verify that the ground spreader (if used) is properly attached and deployed. Check that the tripod is placed on a level and stable surface.
• Issue: Camera does not stay level when tilted.
  Løsning: Adjust the counterbalance setting on the fluid head. Increase the counterbalance step until the camera remains in position when tilted. Also, ensure the camera is properly balanced on the quick release plate by adjusting its position within the 104mm sliding range.
• Issue: Pan or tilt movements are not smooth.
  Løsning: Adjust the pan and tilt drag settings. Increase the drag for a smoother, more controlled movement. If the issue persists, ensure no dirt or debris is obstructing the head's movement.
• Issue: Quick release plate is difficult to insert or remove.
  Løsning: Ensure the quick release lever is fully open. Check for any obstructions or debris in the plate slot. Do not force the plate; if it's still difficult, inspect the plate and head for damage.

6. Specifikationer

7. Garanti og support

For detailed warranty information and technical support, please refer to the official Sachtler webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Sachtler Official Webwebsted: www.sachtler.com