SingularXYZ E1 RTK GNSS-opmålingsudstyr brugermanual

1. Introduktion

The SingularXYZ E1 RTK GNSS Survey Equipment is a high-precision Global Navigation Satellite System (GNSS) receiver designed for professional surveying applications. It offers full-constellation signal tracking, robust anti-interference capabilities, and an advanced RTK algorithm to achieve stable fixed solutions rapidly, even in challenging environments. Its compact and lightweight design, coupled with extended battery life and versatile connectivity options, makes it an ideal tool for efficient field operations.

Nøglefunktioner

• Full-Constellation Tracking: Supports GPS, GLONASS, Galileo, BDS, QZSS, IRNSS, SBAS for robust signal acquisition.
• Rapid Fixed Solution: Achieves stable fixed solutions in seconds, even in challenging environments.
• Kompakt og let: Φ133.5 mm × 67 mm size and 870g weight for enhanced portability.
• Forlænget batterilevetid: Over 20 hours of continuous operation on a single charge with 2.5 hours fast charging via Type-C.
• Integrated IMU: Supports 60° tilt measurements with 5-second initialization for improved efficiency.
• Abundant Transmission Options: NFC, Bluetooth, Type-C USB, WiFi, TNC connector for UHF, and RS232 serial port.
• Ultra-Long Baseline: Up to 15km in enhanced internal UHF mode, 20km in external mode, and over 50km via PDA CORS mode.
• IP68 Durable Design: Yder beskyttelse mod indtrængen af ​​støv og vand.

Pakkens indhold

The E1 RTK GNSS Survey Equipment package typically includes the following components:

• E1 GNSS Receiver (2 units)
• SC200 Data Collector (1 unit)
• SingularPad Software (pre-installed on collector)
• Transport Case (2 units)
• USB-Type C Cable (2 units for receivers)
• Super Charger (2 units for receivers)
• USB cable (1 unit for collector)
• Super Charger (1 unit for collector)
• Bracket (1 unit for collector mounting)
• Hurtigstartguide (1 enhed)
• Quick Start Card (1 unit)
• Whip Antenna (2 units)
• Tape Measure (1 unit)
• 20 cm extension rod plugged on tribrach (1 unit)

Figure 1.1: SingularXYZ E1 RTK GNSS Survey Equipment setup with data collector.

2. Opsætning

2.1 Udpakning og inspektion

Carefully unpack all components from the transport cases. Verify that all items listed in the 'Package Contents' section are present and undamaged. If any items are missing or damaged, contact SingularXYZ support immediately.

Figur 2.1: Detaljeret view of the E1 RTK GNSS Base and Rover packaging lists, showing included accessories like chargers, cables, antennas, and the SC200 data collector.

2.2 Charging the E1 GNSS Receiver

The E1 GNSS receiver features an internal battery. Before first use, fully charge the receiver using the provided USB-Type C cable and Super Charger. A full charge takes approximately 2.5 hours and provides over 20 hours of continuous operation.

• Connect the Type-C cable to the receiver's Type-C interface.
• Connect the Super Charger to a power outlet.
• The Power Indicator light (red) will flash when charging and stay solid green when fully charged.

2.3 Connecting the SC200 Data Collector

The SC200 Data Collector connects to the E1 receiver via Bluetooth or NFC for data exchange and control. Ensure both devices are charged before attempting connection.

• NFC-forbindelse: For quick pairing, simply tap the NFC area of the SC200 Data Collector against the NFC tag on the E1 receiver.
• Bluetooth-forbindelse: Turn on Bluetooth on both the E1 receiver and the SC200. On the SC200, search for available Bluetooth devices and select the E1 receiver to pair.

Figure 2.2: The E1 GNSS receiver's front panel showing indicators and buttons, and its interfaces including NFC, Type-C, TNC, and RS232 ports.

2.4 Mounting the Equipment

The E1 receiver is compatible with standard 5/8" thread poles. Attach the receiver securely to a survey pole or tripod using the appropriate mounting accessories. The SC200 Data Collector can be mounted to the pole using the provided bracket for convenient access during surveying.

3. Betjeningsvejledning

3.1 Tænd/sluk

• Tænd: Long press the Power Button on the E1 receiver until the Power Indicator (red) illuminates.
• Sluk: Long press the Power Button again until the Power Indicator turns off.

3.2 GNSS Signal Tracking

Upon powering on, the E1 receiver will automatically begin tracking GNSS satellites. The Satellite Tracking Indicator will flash to show the number of tracking satellites. The robust signal tracking capabilities ensure a quick and stable fixed RTK solution, even in challenging environments with multipath interference or tree canopy.

3.3 Data Collection with SC200 Data Collector

The SC200 Data Collector, pre-installed with SingularPad field surveying software, provides a comprehensive interface for data collection, project management, and real-time surveying. The software supports various functions including Point Survey, Point Stakeout, CAD Mapping, DSM Stakeout, Road Stake, Volume Calculation, Perimeter and Area, and Localization.

Figure 3.1: The SC200 Data Collector displaying the SingularPad field surveying software interface, highlighting its multi-language, multi-device, and multi-functional capabilities, along with supported file formater.

3.4 Tilt Surveying

The E1 GNSS receiver is equipped with a new generation IMU module, enabling tilt surveying up to 60°. This feature significantly improves efficiency by allowing measurements without needing to perfectly level the pole.

• Initialisering: The IMU can be initialized in just 5 seconds. One initialization is typically sufficient for the entire work session, maintaining an accuracy requirement of ±2.5cm.
• Refer to the SingularPad software manual for detailed instructions on activating and utilizing the tilt compensation feature.

Figure 3.2: The E1 GNSS receiver showcasing its 60° tilt surveying capability, enabled by the new generation IMU, which enhances measurement efficiency.

3.5 Data Transmission and Management

The E1 receiver offers multiple ways to manage and transmit data:

• Web UI: Access the receiver's web page via WiFi for static data download, firmware upgrades, device status checks, and configuration.
• Type-C USB: Connect the receiver directly to a computer for data download and firmware updates.
• UHF Radio: The internal UHF radio supports data transmission up to 15km. An external radio can extend this range to 20km.
• CORS Mode: Connect via PDA CORS mode for ranges over 50km.

Figure 3.3: The E1 GNSS receiver highlighting its NFC one-touch connection, easy data download via Web UI, and 2.5-hour fast charging capability, emphasizing its smaller and lighter design.

3.6 UHF Radio Operation (FCC Note)

The E1 RTK GNSS Survey Equipment includes a UHF function (450–470 MHz) for radio communication between the rover and base units. This function allows for long-range data transmission.

Important Note for U.S. Users:

U.S. users must apply for an FCC radio license for commercial use (e.g., surveying, construction) with the UHF function (450–470 MHz). The device is FCC certified, and supporting information can be provided upon request to assist with the licensing process.

4. Vedligeholdelse

4.1 Rengøring

Regularly clean the exterior of the E1 receiver and SC200 Data Collector with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the housing or screen. Ensure all ports are free of dust and debris.

4.2 Pleje af batterier

For at maksimere batteriets levetid:

• Undgå at aflade batteriet helt ofte.
• Opbevar enheden med en delvis opladning (ca. 50%), hvis den ikke bruges i længere perioder.
• Charge the device in a cool, well-ventilated area.

4.3 firmwareopdateringer

Kontroller SingularXYZ regelmæssigt website or the E1's Web UI for available firmware updates. Keeping the firmware updated ensures optimal performance, new features, and bug fixes.

4.4 Opbevaring

When not in use, store the E1 RTK GNSS Survey Equipment in its transport case in a dry, cool environment, away from direct sunlight and extreme temperatures.

4.5 Durability (IP68)

The E1 receiver boasts an IP68 rating, indicating it is dust-tight and protected against continuous immersion in water. While durable, avoid intentional submersion or exposure to high-pressure water jets.

5. Fejlfinding

This section provides solutions to common issues you might encounter with your E1 RTK GNSS Survey Equipment.

For issues not listed here or if troubleshooting steps do not resolve the problem, please refer to the 'Technical Support' section for assistance.

6. Tekniske specifikationer

7. Garanti og support

7.1 Garantioplysninger

The SingularXYZ E1 RTK GNSS Survey Equipment comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use. Please retain your proof of purchase for warranty claims.

7.2 Teknisk support

SingularXYZ is committed to providing comprehensive after-sales technical support to ensure your equipment operates perfectly. Our skilled and professional support team is available to assist with any technical queries or issues you may encounter.

• Kontaktmetoder: You can reach our technical support team via email or through the contact information provided on the official SingularXYZ webwebsted.
• Video Conference Guidance: We offer video conference guidance for more personalized assistance with setup, operation, or troubleshooting.
• Softwareopdateringer: Enjoy permanent free software upgrades and updates for the SingularPad and Post-processing Software.
• User Manuals & Tutorials: Complete user manuals and video tutorials are available to help you get started and master the equipment.

Figure 7.1: SingularXYZ's dedicated after-sales technical support team, ready to provide assistance and ensure customer satisfaction.