1. Introduktion
This manual provides detailed instructions for the assembly, operation, and maintenance of your Rfiver Table Top TV Stand. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation. This stand is designed to securely hold most 37 to 86 inch flat or curved TVs, with a maximum load capacity of 150 lbs.
2. Sikkerhedsoplysninger
- Sørg for, at alle komponenter er til stede og ubeskadigede før montering. Må ikke anvendes, hvis nogen af delene mangler eller er defekte.
- Overskrid ikke den maksimale vægtkapacitet på 68 kg.
- Verify your TV's VESA mounting pattern is compatible with the stand (200x200mm to 800x600mm).
- Brug altid to eller flere personer til at løfte og placere tv'et på stativet.
- Place the TV stand on a stable, level surface to prevent tipping.
- Hold børn og kæledyr væk fra samlingsområdet.
3. Pakkens indhold
Please check the package to ensure all the following parts are included:
- TV Stand Base (2 pieces)
- Vertical TV Brackets (2 pieces)
- Connecting Bars (2 pieces)
- Hardware-sæt (forskellige skruer, skiver, afstandsstykker til TV-montering)
- Cable Fasteners
- Skridsikre puder
- Soundbar Isolation Pads
- Instruktionsmanual
4. Opsætning og installation
Follow these steps carefully for proper assembly. It is recommended to have a second person assist during the TV attachment phase.
4.1 Assemble Brackets
Begin by assembling the vertical TV brackets and connecting bars. Ensure all screws are tightened securely.
Image showing the first step of assembly: assembling the brackets.
4.2 Fastgør beslag til TV
Carefully place your TV face down on a soft, clean surface. Attach the assembled brackets to the VESA mounting holes on the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and level.
Image illustrating the process of attaching the TV stand brackets to the television's VESA mounting points.
4.3 Attach Feet to Brackets
Connect the TV stand bases (feet) to the vertical TV brackets. This design features a double T-shaped structure for enhanced stability. Ensure all connections are firm.
Image highlighting the T-shaped structural support for improved stability.
4.4 Final Placement and Cable Management
Carefully lift the TV with the attached stand and place it on your desired surface. Apply the non-slip pads to the bottom of the stand's feet to prevent scratches and ensure stability. Use the included cable fasteners to organize and secure cables behind the TV, creating a tidy setup.
Images showing the cable management clip and non-slip pad for organized and stable setup.
5. Betjeningsvejledning
5.1 Højdejustering
The Rfiver Table Top TV Stand features 6 levels of height adjustment, with each level providing approximately 1.8 inches of change. The total height can be adjusted up to 8.9 inches, allowing you to customize the viewing angle for optimal comfort. To adjust the height, carefully loosen the screws on the vertical brackets, slide the TV to the desired height, and then securely tighten the screws.
Image illustrating the various height adjustment levels of the TV stand.
5.2 Placering af soundbar
The stand's design allows for placement of a soundbar on the feet of the stand. Utilize the provided shock-absorbing soundbar isolation pads to reduce vibration and enhance your audio-visual experience.
Image demonstrating a soundbar placed on the stand's feet, utilizing the isolation pads.
6. Vedligeholdelse
For at sikre din TV-messes lange levetid og udseende, skal du følge disse enkle retningslinjer for vedligeholdelse:
- Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver fastspændte. Spænd efter om nødvendigt.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Keep the stand free from dust and debris.
- Avoid placing heavy objects on the stand's feet unless they are specifically designed for that purpose (e.g., soundbars with isolation pads).
7. Fejlfinding
If you encounter any issues with your Rfiver Table Top TV Stand, please refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV wobbles or feels unstable | Screws are loose; stand not on a level surface; weight capacity exceeded. | Check and tighten all screws. Move the stand to a level surface. Ensure TV weight is within 150 lbs limit. |
| Svært ved at justere højden | Screws are too tight; obstruction in adjustment slots. | Loosen adjustment screws sufficiently. Check for any debris in the adjustment slots. |
| Scratches on furniture surface | Non-slip pads not applied or misplaced. | Ensure non-slip pads are correctly applied to the bottom of the stand's feet. |
If the problem persists, please contact Rfiver customer service for assistance.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Rfiver |
| Model | B0CZ7X2W4B |
| Kompatible tv-størrelser | 37 til 86 tommer |
| Maksimal belastningskapacitet | 150 lbs (68 kg) |
| VESA-kompatibilitet | 200x200mm til 800x600mm |
| Højdejustering | 6 levels, up to 8.9 inches total adjustment |
| Materiale | Legeret stål |
| Farve | Sort |
| Produktdimensioner | 17.3 x 14.4 x 37.9 cm (omtrentligt, samlet) |
| Varens vægt | 7.72 pund |
Image detailing the compatibility of the TV stand with various TV sizes and VESA mounting patterns.
9. Garanti og support
Rfiver products are manufactured with quality and durability in mind. For warranty information or technical support, please refer to the warranty card included with your product or visit the official Rfiver website. Our customer service team is available to assist you with any questions or concerns regarding your TV stand.
