OSD Audio Nero HTA5200 5-Channel Home Theater Amplivligere brugervejledning

1. Introduktion

Thank you for choosing the OSD Audio Nero HTA5200 5-Channel Home Theater Amplifier. Det her amplifier is designed to deliver high-quality audio performance for your home theater system. This manual provides essential information for the safe and efficient operation of your amplifier. Please read it thoroughly before installation and use.

2. Vigtige sikkerhedsinstruktioner

Læs disse instruktioner.
Gem disse instruktioner.
Overhold alle advarsler.
Følg alle instruktioner.
Brug ikke dette apparat i nærheden af vand.
Rengør kun med en tør klud.
Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
Undgå at omgå sikkerhedsformålet med det polariserede stik eller stik med jordforbindelse. Et polariseret stik har to knive, hvor den ene er bredere end den anden. Et stik med jordforbindelse har to knive og et tredje jordstik. Det brede blad eller det tredje ben er tilvejebragt for din sikkerhed. Hvis det medfølgende stik ikke passer i din stikkontakt, skal du kontakte en elektriker for at få udskiftet den forældede stikkontakt.
Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det sted, hvor de kommer ud af apparatet.
Brug kun tilbehør/tilbehør specificeret af producenten.
Brug kun den vogn, stativ, stativ, beslag eller bord, der er specificeret af producenten eller solgt sammen med apparatet. Når en vogn bruges, skal du være forsigtig, når du flytter kombinationen af vognen/apparatet for at undgå skader ved at vælte.
Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.

3. Pakkens indhold

Kontroller venligst, at alle varer er til stede i pakken:

OSD Audio Nero HTA5200 5-Channel Home Theater Amplivligere
Strømledning
Quick Start Guide (This document serves as the detailed user manual)

4. Produktet er slutview

4.1 Frontpanel

Front view of OSD Audio Nero HTA5200 amplivligere — **Billede 4.1:** Front view of the OSD Audio Nero HTA5200 amplifier. Shows the power button and channel status LEDs.

The front panel features the main power button and individual LED indicators for each of the five amplifier channels. These LEDs indicate the operational status of each channel (ON, Standby, or Protection mode).

4.2 Bagpanel

Bag view of OSD Audio Nero HTA5200 amplivligere — **Billede 4.2:** Bag view of the OSD Audio Nero HTA5200 amplifier. Displays input and output connections, power switch, and trigger ports.

The rear panel provides all necessary connections for audio input, speaker output, and power. It includes balanced XLR inputs, unbalanced RCA inputs, 12V trigger ports, and robust speaker binding posts.

Close-up of rear panel connections on OSD Audio Nero HTA5200 amplivligere — **Billede 4.3:** Detaljeret view of the rear panel connections, highlighting the XLR and RCA inputs, speaker terminals, and 12V trigger ports.

4.3 Interne komponenter

Indre view of OSD Audio Nero HTA5200 amplifier showing transformers and circuit boards — **Billede 4.4:** Indre view af ampløfter, showcasing the large toroidal transformers and organized circuit boards, indicative of its Class AB design.

The internal design features high-quality components, including large toroidal transformers, which contribute to the amplifier's stable power delivery and audio fidelity.

5. Opsætning og forbindelser

5.1 Placering

Placer amplifier on a stable, level surface with adequate ventilation. Ensure there is sufficient space around the unit for airflow to prevent overheating. Avoid placing it near heat sources or in enclosed cabinets without proper ventilation.

5.2 Lydindgangsforbindelser

The Nero HTA5200 offers both balanced XLR and unbalanced RCA input options for each channel. Choose the connection type that best suits your pre-amplivligere eller AV -modtager.

XLR-indgange: For optimal signal integrity and noise rejection, use balanced XLR cables to connect your source device to the amplifiers XLR-indgange.
RCA-indgange: Alternatively, use high-quality RCA cables to connect your source device to the amplifiers RCA-indgange.

Note: Do not use both XLR and RCA inputs simultaneously for the same channel. Select one input type per channel.

5.3 Højttalerudgangstilslutninger

Connect your speakers to the corresponding speaker binding posts on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The ampLifier understøtter 4-ohm og 8-ohm højttalere.

Unscrew the binding post cap.
Insert the bare wire or banana plug into the hole.
Tighten the binding post cap securely.

Caution: Ensure all speaker wires are securely connected and do not short-circuit.

5.4 12V Trigger Connection

The 12V trigger input allows the amplifier to be powered on or off automatically by a compatible source device (e.g., an AV receiver). Connect a 3.5mm mono cable from your source's 12V trigger output to the amplifier's 12V TRIGGER IN port. Set the TRIGGER switch on the rear panel to the "ON" position for automatic operation, or "OFF" for manual power control.

5.5 Strømtilslutning

Før du tilslutter netledningen, skal du sørge for at lydstyrken er korrekt.tage selector switch (if present and accessible) is set to your local mains voltage (120V or 240V). Connect the supplied power cord to the amplifier's AC inlet and then to a suitable wall outlet.

6. Betjening

6.1 Tænd/sluk

Manuel betjening: Press the power button on the front panel to turn the amplifier ON or OFF. The front panel LEDs will illuminate when the amplifier er aktiv.
12V Trigger Operation: If the 12V trigger is connected and the rear panel switch is set to "ON", the amplifier will power on automatically when it receives a 12V signal from your source device. It will power off when the signal is removed.

6.2 kanalstatus-LED'er

The LEDs on the front panel indicate the status of each amplifier kanal:

Oplyst: Channel is active and operating normally.
Dim/Off: Channel is in standby mode or powered off.
Flashing/Red: Channel is in protection mode. Refer to the Troubleshooting section.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your OSD Audio Nero HTA5200 ampLifier, følg disse vedligeholdelsesretningslinjer:

Rensning: Støv af amplifier regularly with a soft, dry cloth. For stubborn marks, lightly dampRengør kluden med vand. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
Ventilation: Ensure that the ventilation openings are clear and not obstructed by dust or other objects. Proper airflow is crucial for heat dissipation.
Forbindelser: Periodically check all cable connections (power, input, speaker) to ensure they are secure and free from corrosion.
Miljø: Betjen amplifier in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.

8. Fejlfinding

Hvis du støder på problemer med din ampLifier, se følgende tabel, før du kontakter support:

Problem	Mulig årsag	Løsning
Ingen strøm / Enheden tænder ikke.	Netledningen er ikke tilsluttet. Strømudtaget er ikke aktivt. Rear panel power switch is OFF. 12V Trigger switch is ON, but no trigger signal is present.	Sørg for, at strømkablet er korrekt tilsluttet. Test stikkontakten med en anden enhed. Set the rear panel power switch to ON. Set the 12V Trigger switch to OFF for manual power, or ensure a 12V signal is sent from the source.
Ingen lyd fra højttalere.	Input cables not connected or faulty. Speaker wires not connected or incorrect polarity. Source device not playing audio or volume too low. Amplifier in protection mode (LEDs flashing/red).	Check all input cable connections. Kontroller højttalerledningernes forbindelser og polaritet. Ensure source device is active and volume is adequate. Sluk for amplifier, check speaker connections for shorts, and restart.
Forvrænget eller dårlig lydkvalitet.	Løse eller defekte forbindelser. Incorrect input level. Uoverensstemmelse mellem højttalerimpedans. Kildens lydkvalitet er lav.	Check all cables for secure connection and damage. Ensure input levels from the source are not too high or too low. Verify speakers are compatible with the amplifierens impedansområde. Test med en anden lydkilde.
Amplifier goes into protection mode (LEDs flashing/red).	Overophedning. Speaker short circuit. Overbelastningstilstand.	Sluk for amplifier and allow it to cool down. Ensure proper ventilation. Check all speaker wire connections for shorts (e.g., stray strands touching). Reduce volume or check speaker impedance.

9. Specifikationer

Feature	Detalje
Model	NERO-HTA5200
Kanaler	5
Amplivligere klasse	Klasse AB
Udgangseffekt (4 ohm)	210W per channel (all channels driven)
Udgangseffekt (8 ohm)	145W per channel (all channels driven)
Signal-støj-forhold (SNR)	110 dB (at full power), 105 dB (at 1W)
Indgange	Balanced XLR, Unbalanced RCA
Udløser	12V IN/UD
Produktmål (B x D x H)	17.1 x 16.57 x 6.3 tommer
Varens vægt	63 pund
Fabrikant	OSD lyd

10. Garantioplysninger

The OSD Audio Nero HTA5200 amplifier comes with a comprehensive 5 års garanti. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official OSD Audio webwebsted eller kontakt kundesupport.

11. Kundesupport

If you require further assistance or have questions not covered in this manual, please contact OSD Audio customer support. You can typically find contact information on the official OSD Audio webhjemmeside eller gennem din forhandler.

Online ressourcer: www.osdaudio.com

	OSD AUDIO NERO XA Series Home Theater Ampinstruktionsbog til lifier Comprehensive owner's manual for the OSD AUDIO NERO XA series home theater amplifiers, including the XA5180, XA7180, and XA3200 models. Covers safety instructions, connections, operation, maintenance, specifications, and warranty information.
	OSD Audio NERO MAX12, MAX8, CONTROL12 Multiroom Pre-Amp & Ampinstruktionsbog til løftere Omfattende brugermanual til OSD Audio NERO MAX12, MAX8 og CONTROL12 multirumsforprogrammering.ampløftere og ampliberatorer. Lær om funktioner, installation, forbindelser, app-kontrol og garantioplysninger.
	OSD Audio NERO MAX12 Wi-Fi Multiroom Amplivligere Manual User manual for the OSD Audio NERO MAX12 Wi-Fi Multiroom Amplifier, detailing its features, specifications, connections, and operation via app or optional keypads.
	OSD Audio NERO XA5180 Hjemmebiograf Ampinstruktionsbog til lifier Brugermanual til OSD Audio NERO XA5180 hjemmebiograf Amplifiker, der dækker sikkerhedsforanstaltninger, tilslutninger, betjening, vedligeholdelse, specifikationer og garantioplysninger.
	OSD Audio NERO XA5 Hjemmebiograf Ampinstruktionsbog til lifier Omfattende brugermanual til OSD Audio NERO XA5 hjemmebiografen Ampforsyning, med detaljerede oplysninger om sikkerhedsforanstaltninger, tilslutninger på bagpanelet, strømindstillinger, betjening, vedligeholdelse, ydeevnespecifikationer og garantioplysninger.
	OSD Audio NERO MAX12 Wi-Fi Multiroom Amplivligere brugervejledning Omfattende brugermanual til OSD Audio NERO MAX12 Wi-Fi Multiroom AmpLifier, der beskriver funktioner, specifikationer, installation og betjening til multizone-lyddistribution. Indeholder information om valgfrie tastaturer og app-styring.