Indledning
The STRICH SPS-40B is a versatile and portable power supply designed for guitar and bass effect pedals. Featuring a built-in 10,000mAh rechargeable battery, it provides cord-free power for extended periods. With 10 isolated 9V DC outputs and a 5V/1A USB port, it ensures clean, stable power for a wide range of pedals and can also charge external devices.
Image: The STRICH SPS-40B Pedal Power Supply unit shown with its included power cables.
Sikkerhedsoplysninger
- Udsæt ikke enheden for vand eller overdreven fugt.
- Undgå ekstreme temperaturer.
- Forsøg ikke at skille enheden ad eller ændre den. Overlad al service til kvalificeret personale.
- Use only the provided USB charging cable or a compatible 5V/1A USB power source for charging.
- Sørg for korrekt polaritet og volumentage when connecting pedals to avoid damage.
Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x STRICH SPS-40B Guitar Pedal Power Supply
- 10 x DC Power Cables (for connecting pedals)
- 1 x Type-C USB-opladningskabel
- 1 x Brugermanual (dette dokument)
Image: The complete package contents of the SPS-40B, showing the power supply, ten DC power cables, and a USB-C charging cable.
Produkt overview
The SPS-40B unit features multiple output ports and indicators for ease of use.
- DC 9V Outputs: Ten isolated 9V outputs are available. Two outputs provide 300mA, suitable for higher current draw pedals, while eight outputs provide 100mA for standard pedals. Each output has an indicator light.
- USB 5V/1A udgang: A standard USB-A port for charging external devices like smartphones or tablets.
- Opladningsport: A USB Type-C port for recharging the internal 10,000mAh battery.
- Afbryderen: Slår enheden til/fra.
- Batteriniveauindikatorer: Four LED lights (25%, 50%, 75%, 100%) display the remaining battery charge.
Billede: Detaljeret view of the SPS-40B's output section, highlighting the two 300mA and eight 100mA 9V DC outputs.
Image: Side panel of the SPS-40B, illustrating the power switch, USB-C charging input, USB-A output, and battery status LEDs.
Opsætning
1. Charging the Power Supply
Before initial use, fully charge the SPS-40B. Connect the provided USB Type-C charging cable to the unit's "Charging Port" and the other end to a 5V/1A USB power source (e.g., a wall adapter, computer USB port, or power bank). The battery level indicators will illuminate to show charging progress. All four LEDs will be solid when fully charged.
2. Tilslutning af pedaler
- Ensure the SPS-40B is turned off.
- Identify the power requirements (voltage and current draw in mA) for each of your pedals. Most guitar pedals require 9V DC.
- Connect one end of the included DC power cables to the appropriate 9V output jacks on the SPS-40B. Match the current rating (100mA or 300mA) to your pedal's needs.
- Connect the other end of the DC power cables to the power input jack of your effect pedals. Ensure correct polarity (center negative is standard for most pedals).
Image: The SPS-40B integrated into a pedalboard setup, providing power to several effect pedals.
Betjeningsvejledning
1. Tænd/sluk
Flip the "POWER" switch on the side of the unit to the "ON" position to activate the power supply. The blue indicator LEDs above each active output will light up, confirming power delivery to your pedals. Flip the switch to "OFF" when not in use to conserve battery life.
2. Monitoring Battery Level
The four green LEDs next to the charging port indicate the remaining battery capacity (25%, 50%, 75%, 100%). Recharge the unit when the battery level is low to ensure uninterrupted performance.
3. Using the USB Output
The "OUT DC 5V/1A" USB-A port can be used to charge compatible USB-powered devices. Simply connect your device's USB charging cable to this port. This feature is active when the power supply is turned on.
Video: En overview of the STRICH SPS-40B Pedal Power Supply, demonstrating its features and connectivity. (Source: Strich Direct)
Opretholdelse
- Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the power supply in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, charge the battery to approximately 50-75% every few months to maintain battery health.
- Batteripleje: Undgå at aflade batteriet helt ofte, da dette kan reducere dets levetid.
Fejlfinding
- No Power to Pedals:
- Sørg for, at strømforsyningen er tændt.
- Check the battery level indicators and recharge if necessary.
- Verify that DC cables are securely connected to both the power supply and the pedals.
- Confirm that the pedal's power requirements (9V DC, correct mA) match the output used.
- Overdreven støj/brummen:
- Sørg for, at alle kabler er korrekt afskærmede og i god stand.
- The SPS-40B features isolated outputs to minimize noise. If noise persists, try isolating the problematic pedal or cable.
- Ensure no ground loops are present in your signal chain.
- USB Device Not Charging:
- Sørg for, at strømforsyningen er tændt.
- Check the USB cable and device for proper connection.
- Verify the device's charging requirements are compatible with 5V/1A output.
Specifikationer
| Feature | Specifikation |
|---|---|
| Model | SPS-40B |
| Batterikapacitet | 10,000mAh |
| DC 9V Outputs | 2 x 300mA, 8 x 100mA (10 total, isolated) |
| USB udgang | 5V/1A |
| Opladningsport | USB Type-C |
| Materiale | Alloy, Aluminum |
| Varens vægt | 0.6 kg (1.32 pund) |
| Produktdimensioner | 7.68 x 4.33 x 2.56 tommer |
Garanti og support
STRICH offers a warranty for this product. Please refer to the following details:
- Garantiperiode: Up to 12-month warranty from the date of purchase.
- Returpolitik: 30 dages gratis returret.
- Kundesupport: E-mail chat assistant response within 24 hours. For support, please visit the official STRICH store on Amazon or contact their customer service directly.
