Indledning
Thank you for choosing the PATPET U11 Anti Barking Device. This ultrasonic device is designed to help control excessive dog barking by emitting a safe, high-frequency sound that is inaudible to most humans but effective for dogs. It features three deterrent modes, automatic barking detection, and is suitable for both indoor and outdoor use. Please read this manual thoroughly before use to ensure proper operation and maximize the device's effectiveness.
Image: The PATPET U11 Anti Barking Device, a green rectangular unit with a yellow power button and two sonic emitters, shown next to a dog.
Produktegenskaber
- Ultrasonic Barking Control: Emits high-frequency sound to deter barking, inaudible to most humans.
- 50FT Effective Range: Detects and deters barking up to 50 feet away.
- 3 Safe Deterrent Modes: Adjustable frequency settings (Low, Medium, High) for different dog sensitivities and barking behaviors.
- Automatic Barking Detection: Built-in microphone accurately recognizes dog barks (above 84dB) to activate the deterrent.
- Dual Sonic Emitters: Equipped with two powerful emitters for broader coverage and stronger emission.
- Genopladeligt batteri: High-capacity battery provides over 45 days of standby time on a single 4-hour charge.
- IPX4 Vandtæt: Designed to withstand splashes and light rain, suitable for outdoor use.
- Fleksibel placering: Can be placed on a table, mounted on a wall, or hung from a tree.
Image: A summary of the PATPET U11's key features, including 50ft control range, 2 sonic emitters, 3 transmission frequencies, 45+ days standby, 25-27KHz frequency range, and automatic barking detection.
Pakkens indhold
Kontroller venligst pakkens indhold ved udpakning:
- 1 x PATPET U11 Anti Barking Device
- 1 x USB-opladningskabel (Type-C)
- 1 x brugermanual
- Mounting Screws (if applicable for wall mount)
Enhed overview
Image: Diagram illustrating the key components of the PATPET U11 device, including the USB Charging Port, On/Off button, Enhanced Ultrasound switch, Normal Ultrasound switch, Powerful Dual Sonic Emitters, Hung Hole, LED Indicator, Microphone, General Ultrasound switch, and Drainage Hole.
- USB opladningsport: Til tilslutning af ladekablet.
- Tænd/sluk-knap (tænd/sluk): Tryk for at tænde eller slukke for enheden.
- Mode Switch: Slide switch to select between Low, Medium, and High frequency modes.
- LED-indikator: Shows device status (e.g., charging, active, low battery).
- Mikrofon: Detects dog barking.
- Sonic Emitters: Emit the ultrasonic sound.
- Hung Hole: For wall mounting or hanging.
- Dræningshul: For water runoff when used outdoors.
Opsætning
- Oplad enheden: Before first use, fully charge the device using the provided USB cable. The LED indicator will show charging status.
- Tænd: Press and hold the power button (yellow button) for a few seconds until the LED indicator lights up, indicating the device is on.
- Vælg tilstand: Use the slide switch to choose the desired ultrasonic frequency mode (Low, Medium, or High). Refer to the "Operating Instructions" section for guidance on mode selection.
- Placering: Position the device in an area where the dog's barking is most frequent and within the 50-foot effective range. Ensure the sonic emitters face the direction of the barking dog.
Betjeningsvejledning
The PATPET U11 operates automatically once powered on and a mode is selected. It uses a built-in microphone to detect dog barking.
- When the device detects barking (above 84dB), it will automatically emit a high-frequency ultrasonic sound.
- The sound is designed to be startling and unpleasant to dogs, encouraging them to stop barking.
- The device will stop emitting the sound once the barking ceases.
- The LED indicator will typically flash or change color to indicate when the ultrasonic sound is being emitted.
Image: An illustration showing the device mounted on a tree, with blue waves indicating ultrasonic emission, and "Before" and "After" images of dogs demonstrating the effect of automatic barking detection.
Understanding Deterrent Modes
The PATPET U11 offers three ultrasonic frequency modes to cater to different dog sensitivities and barking habits:
- Lav frekvens: Recommended for sensitive dogs or initial training. This mode emits a gentler ultrasonic sound.
- Mellem frekvens: Suitable for most dogs and common barking issues. This is a balanced deterrent.
- Høj frekvens: Best for persistent barkers or less sensitive dogs. This mode emits the strongest ultrasonic sound.
Experiment with the modes to find the most effective setting for your dog or the target dog. Start with the Low frequency and increase if necessary.
Image: The PATPET U11 device shown with three different dog breeds, illustrating the recommended use for each of the three ultrasonic modes: Low Frequency for sensitive dogs, Medium Frequency for naughty dogs, and High Frequency for excited dogs.
Opladning af enheden
The PATPET U11 features a built-in rechargeable battery for convenience.
- Tilslut det medfølgende USB Type-C-kabel til opladningsporten på enheden.
- Connect the other end of the USB cable to a compatible power source such as a USB power adapter, PC, laptop, or power bank.
- En fuld opladning tager typisk cirka 4 timer.
- Once fully charged, the device can operate for over 45 days in standby mode.
- The LED indicator will show the charging status (e.g., solid light while charging, off when fully charged).
Billede: Et nærbillede view of the PATPET U11's USB-C charging port, with various charging options illustrated, including power adapter, PC, laptop, and power bank. The image also highlights the 45+ days battery life and 4 hours fast charge.
Placement and Usage Scenarios
The PATPET U11 is versatile and can be used in various locations:
- Indendørs brug: Place on a table, shelf, or mount on a wall in areas where your dog barks excessively, such as near windows or doors.
- Udendørs brug: Mount on a fence, tree, or wall facing the area where barking occurs, such as a yard or towards a neighbor's dog. Ensure the device is within the 50-foot range of the barking source.
- Optimal positionering: For best results, position the device at a height similar to the dog's head and ensure there are no major obstructions between the device and the barking dog.
Image: A collage demonstrating various usage scenarios for the PATPET U11, including indoor use (on a table), outdoor wall mounting, addressing neighbor's dog barking, and use for dogs on the roadside.
Vandtæthed (IPX4)
The PATPET U11 is rated IPX4 waterproof, meaning it is resistant to splashing water from any direction. This makes it suitable for outdoor use in light rain or damp forhold.
- Enheden må ikke nedsænkes i vand.
- Avoid exposing the device to heavy downpours or prolonged periods of extreme wet weather.
- Ensure the drainage hole is clear if used outdoors.
Image: The PATPET U11 device mounted on an outdoor wall during light rain, illustrating its IPX4 waterproof rating and suitability for various weather conditions.
Opretholdelse
- Rensning: Tør enheden af med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: When not in use for extended periods, store the device in a cool, dry place. Ensure it is fully charged before storing to preserve battery life.
- Microphone & Emitters: Keep the microphone and sonic emitters clear of dust and debris to ensure optimal performance.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Low battery; Device is off. | Charge the device fully. Press and hold the power button to turn it on. |
| Device not deterring barking. | Incorrect mode selected; Device too far from dog; Obstructions; Dog not sensitive to ultrasonic sound. | Try a higher frequency mode. Move the device closer (within 50ft) and ensure a clear line of sight. Some dogs may not respond to ultrasonic devices. |
| Kort detektionsområde. | Microphone obstructed; Environmental noise interference. | Ensure the microphone is clean and unobstructed. Reduce background noise if possible. |
| LED-indikatoren virker ikke. | Device off; Malfunction. | Ensure the device is powered on. If problem persists, contact customer support. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | U11 |
| Effektiv rækkevidde | Op til 50 fod (15 meter) |
| Ultrasonic Frequencies | 25-27 KHz (3 adjustable modes) |
| Bark Detection Decibel | Mere end 84dB |
| Batterilevetid (Standby) | ≥45 dage |
| Opladningstid | Ca. 4 timer |
| Vandtæt vurdering | IPX4 |
| Varens vægt | 14 ounce (ca. 397 gram) |
| Dimensioner (L x B x H) | 7.83 x 5.28 x 2.05 tommer (ca. 19.9 x 13.4 x 5.2 cm) |
| Fabrikant | Shenzhen Patpet Technology Co., Ltd. |
Sikkerhedsoplysninger
- This device is intended for use with dogs only.
- Do not use this device on aggressive or anxious dogs without consulting a professional dog trainer or veterinarian.
- Opbevares utilgængeligt for børn.
- Enheden må ikke ændres eller skilles ad.
- Sørg for, at opladningsporten er tør, før du tilslutter USB-kablet.
- The ultrasonic sound is generally inaudible to humans, but prolonged exposure at close range may cause discomfort to some sensitive individuals.
Garanti og support
PATPET products are designed with quality and reliability in mind. For any questions, concerns, or technical support regarding your PATPET U11 Anti Barking Device, please contact PATPET customer service. Refer to the product packaging or the official PATPET webwebsted for kontaktoplysninger.
Gem venligst dit købsbevis for garantikrav.
