1. Introduktion
The Waveshare ESP32-S3-Nano-M is a compact and powerful microcontroller development board designed for a wide range of applications, including IoT and MicroPython projects. It features the ESP32-S3R8 chip with a dual-core 32-bit LX7 processor, offering robust performance and integrated wireless communication capabilities. This manual provides essential information for setting up, operating, and understanding your development board.
Billede 1.1: Top-down view of the Waveshare ESP32-S3-Nano-M Development Board.
2. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- 1x Waveshare ESP32-S3-Nano-M Development Board with pre-soldered header
Image 2.1: The Waveshare ESP32-S3-Nano-M board as included in the package.
3. Produktet er slutview
3.1 Nøglefunktioner
- Adopts ESP32-S3R8 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz.
- Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 16MB Flash memory.
- Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.
- Supports seamlessly switching between Arduino and MicroPython programming, offering flexible usage.
- Compatible with Arduino IoT Cloud, allowing monitoring and control of projects remotely.
- Supports HID, emulating Human Interface Devices such as keyboards or mice via USB port for easier interaction with PC.
3.2 Hvad er der om bord
The following diagram illustrates the main components and their locations on the ESP32-S3-Nano-M development board:
Image 3.1: Labeled components of the ESP32-S3-Nano-M board.
- ESP32-S3R8 dual-core processor: Up to 240 MHz running frequency.
- W25Q128JVSIQ: 16MB Flash for program and data storage.
- MP2322GQH: 3.3V voltage regulator.
- 2.4G ceramic antenna.
- USB Type-C connector: For downloading programs and serial port debugging.
- RST button: For resetting the ESP32-S3R8.
- Arduino Nano Interface: Compatible with Arduino interface, adapting 2.54 pitch solder pad.
- RGB indicator: Blinks and turns off during power on or reset, supports programmable control.
- Strømindikator.
- User LED.
3.3 Pinout Definition and Outline Dimensions
Understanding the pinout is crucial for connecting peripherals and integrating the board into your projects. The following image details the pin assignments and the physical dimensions of the board.
Image 3.2: Pinout definitions and outline dimensions (in mm) of the ESP32-S3-Nano-M board.
4. Specifikationer
Detailed technical specifications for the Waveshare ESP32-S3-Nano-M Development Board:
| Feature | Specifikation |
|---|---|
| mikrocontrollere | ESP32-S3R8 (Dual-core 32-bit Xtensa LX7) |
| Urfrekvens | 240 MHz |
| SRAM | 512KB |
| ROM | 384KB |
| PSRAM | 8 MB |
| Flash-hukommelse | 16 MB |
| Trådløs kommunikation | 2.4GHz Wi-Fi + Bluetooth LE |
| Operation Voltage | 3.3V |
| Strømindgang | 6-21V |
| IO Pin Output Current | 40mA |
| Digitale pins | 14 |
| Analog Pins | 8 |
| PWM-stifter | 5 |
| UART | 2 |
| I2C | 1 |
| SPI | 1 |
| 5V strømudgang | 1000mA Max |
| Dimensioner | 43.18 x 17.78 mm (approximate, refer to pinout diagram for exact details) |
| Vægt | 0.352 ounce |
Image 4.1: Comparison table highlighting key specifications of the ESP32-S3-Nano-M against other models.
5. Opsætning
Follow these steps to set up your Waveshare ESP32-S3-Nano-M Development Board:
- Installer Arduino IDE: Download og installer den nyeste version af Arduino IDE fra den officielle Arduino webwebsted (www.arduino.cc/en/software).
- Add ESP32 Board Support:
- Åbn Arduino IDE, gå til File > Præferencer.
- In the 'Additional Boards Manager URLs' field, add the ESP32 board manager URL (typisk
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json). - Gå til Værktøjer > Tavle > Tavleadministrator.... Søg efter 'ESP32' and install the 'esp32 by Espressif Systems' package.
- Vælg bestyrelse: After installation, go to Tools > Board > ESP32 Arduino and select the appropriate board for ESP32-S3 (e.g., 'ESP32S3 Dev Module' or similar, depending on the installed package version).
- Tilslut brættet: Connect the ESP32-S3-Nano-M to your computer using a USB Type-C cable.
- Vælg port: I Arduino IDE'en skal du gå til Værktøjer > Port and select the serial port corresponding to your connected ESP32 board.
- Installer drivere (hvis nødvendigt): On some operating systems, you may need to install USB-to-serial drivers (e.g., CP210x or CH340/CH341) if the board is not recognized.
6. Betjeningsvejledning
Once the board is set up, you can begin programming and operating it:
- Programming with Arduino IDE:
- Åbn en example sketch (File > Eksamples) or write your own code.
- Click the 'Verify' button (checkmark icon) to compile your code.
- Click the 'Upload' button (right arrow icon) to upload the compiled code to your ESP32-S3-Nano-M board. Ensure the correct board and port are selected.
- Monitor serial output using the Serial Monitor (Tools > Serial Monitor) to debug or view program output.
- Programming with MicroPython:
- Install esptool.py:
pip install esptool. - Erase flash:
esptool.py --chip esp32s3 erase_flash. - Download the latest MicroPython firmware for ESP32-S3 from the official MicroPython webwebsted (micropython.org/download/esp32s3/).
- Flash firmware:
esptool.py --chip esp32s3 --port [YOUR_PORT] write_flash -z 0x0 [FIRMWARE_FILE.bin]. Replace[YOUR_PORT]with your board's serial port and[FIRMWARE_FILE.bin]with the downloaded firmware file. - Use a tool like Thonny IDE to connect to the board and write/upload MicroPython scripts.
- Install esptool.py:
- Using Arduino IoT Cloud:
- Opret en konto på Arduino IoT Cloud webwebsted (create.arduino.cc/iot/).
- Follow the on-screen instructions to register your ESP32-S3-Nano-M board as a new device.
- Develop dashboards and integrate your board with cloud services for remote monitoring and control.
7. Fejlfinding
If you encounter issues with your ESP32-S3-Nano-M board, consider the following troubleshooting steps:
- Board ikke fundet: Ensure the USB Type-C cable is fully inserted and functional. Try a different USB port or cable. Verify that the necessary USB-to-serial drivers are installed on your computer.
- Uploadfejl: Check that the correct board type and serial port are selected in the Arduino IDE. Sometimes, pressing and holding the 'BOOT' button while pressing 'RST' (then releasing 'RST' and then 'BOOT') can put the ESP32 into bootloader mode for successful flashing.
- Code Not Running: After uploading, press the 'RST' button on the board to restart the program. Check your code for logical errors using the Serial Monitor.
- Problemer med Wi-Fi/Bluetooth-forbindelse: Ensure your network credentials are correct in your code. Check for interference from other 2.4GHz devices. Verify antenna integrity.
- Strømproblemer: Ensure the power supply is within the specified 6-21V range. If using external power, ensure connections are secure and polarity is correct.
8. Garanti og support
Waveshare products are designed for reliability and performance. For specific warranty information, please refer to the documentation provided with your purchase or visit the official Waveshare website. For technical support, resources, and community forums, please visit the Waveshare support page or contact their customer service directly.
Always ensure you are using the latest software and firmware versions for optimal performance and security updates.
