Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplivligere brugervejledning

1. Sikkerhedsoplysninger

Please read all instructions carefully before installing and operating your Memphis Audio PRX1000.1V2 ampleverandør. Manglende overholdelse af disse retningslinjer kan resultere i skade på amphøjttalere eller køretøj, og det kan ugyldiggøre din garanti.

• Professionel installation anbefales: For optimal performance and safety, professional installation by an authorized Memphis Audio dealer is highly recommended.
• Strømkilde: Ensure the vehicle's battery is disconnected before making any power connections to prevent electrical shorts.
• Ledningsføring: Use appropriate gauge wiring for power, ground, and speaker connections as specified in this manual. Improper wiring can lead to overheating and damage.
• Montering: Monter amplifier securely in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate airflow around the amplivligere.
• Lydstyrkeniveauer: Prolonged exposure to high volume levels can cause hearing damage. Always listen at moderate levels.
• Jording: A proper ground connection is crucial for amplifier stability and performance. Connect the ground wire directly to the vehicle's chassis, ensuring a clean, paint-free metal-to-metal contact.

2. Produktet er slutview

The Memphis Audio PRX1000.1V2 is a high-performance monoblock subwoofer amplifier designed to deliver powerful and precise bass. This amplifier is engineered for efficient power delivery, enhancing low-frequency performance in your vehicle's audio system. Its robust design is optimized for driving subwoofers effectively.

Figur 2.1: Øverst view of the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier. This image shows the sleek black casing with the illuminated Memphis logo.

2.1. Nøglefunktioner

• Monoblock subwoofer amplifier design.
• 1000 Watts RMS x 1 at 1-ohm for powerful and precise bass output.
• Optimized for efficient subwoofer driving.
• Efficient power delivery for enhanced low-frequency performance.
• Ideal for dedicated, high-powered subwoofer setups.

2.2. Pakkens indhold

Sørg for, at alle genstande er til stede ved udpakning:

• Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplivligere
• Brugervejledning (dette dokument)
• Monteringsudstyr (skruer osv.)
• Remote Bass Level Control (if included with your model)

3. Installationsvejledning

Korrekt installation er afgørende for din ydeevne og levetid amplifier. If you are unsure about any steps, consult a professional installer.

3.1. Monteringssted

Vælg et monteringssted, der:

• Is dry and free from moisture.
• Allows for adequate airflow around the ampfor at forhindre overophedning.
• Is secure and protected from physical damage.
• Is not exposed to direct sunlight or excessive heat.

Common locations include under a seat, in the trunk, or behind a panel.

3.2. Ledningsforbindelser

Before making any connections, disconnect the vehicle's negative battery terminal.

Figur 3.1: View of the power and speaker output terminals on the Memphis Audio PRX1000.1V2 amplifier. This side features connections for GND (Ground), REM (Remote Turn-On), +12V (Power), and Speaker Out.

1. Strømtilslutning (+12V):

   Connect a heavy-gauge power wire (e.g., 4 AWG or larger, depending on total system power) directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an appropriate fuse holder (rated for the amplifier's current draw) within 18 inches (45 cm) of the battery.
2. Jordforbindelse (GND):

   Connect a heavy-gauge ground wire (same gauge as the power wire) from the GND terminal on the amplifier to a clean, solid metal point on the vehicle's chassis. Ensure the contact point is free of paint, rust, or dirt for an effective ground. The ground wire should be as short as possible, ideally less than 3 feet (1 meter).

3. Fjerntænding (REM):

   Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output (usually a blue/white wire) to the REM terminal on the ampDenne ledning signalerer amplifier til at tænde og slukke med din hovedenhed.

4. Speaker Output (SPEAKER OUT):

   Connect your subwoofer(s) to the SPEAKER OUT terminals. This is a monoblock amplifier, designed for a single subwoofer or multiple subwoofers wired to present a 1-ohm load for maximum power. Ensure correct polarity (+ to + and - to -) for all speaker connections.

Figur 3.2: View of the input and control panel on the Memphis Audio PRX1000.1V2 amplifier. This side includes RCA Input/Output, REM/DC/Audio switch, Input Level control, and Remote bass control port.

5. RCA Input (INPUT):

   Connect RCA cables from your head unit's subwoofer pre-out (or full-range pre-out if no dedicated subwoofer output is available) to the RCA INPUT terminals on the amplivligere.
6. RCA Output (OUTPUT):

   The RCA OUTPUT terminals allow you to pass the audio signal to another ampløfter i en multi-ampopsætning af lift.

7. Remote Bass Control (REMOTE):

   Connect the included remote bass level control to the REMOTE port. This allows for convenient adjustment of the subwoofer level from the driver's seat.

4. Betjeningsvejledning

4.1. Første opstart

After all connections are made and verified, reconnect the vehicle's negative battery terminal. Turn on your head unit. The amplifier should power on, indicated by an illuminated logo or power indicator.

4.2. Adjusting Input Level (Gain)

The INPUT LEVEL control (often referred to as gain) matches the ampjusterer indgangsfølsomheden i forhold til udgangsniveauet på din hovedenhed. Det er ikke en lydstyrkekontrol.

1. Drej på amplifier's INPUT LEVEL control to its minimum (fully counter-clockwise) setting.
2. Set your head unit's volume to about 75-80% of its maximum level.
3. Play a dynamic piece of music with strong bass content.
4. Slowly increase the INPUT LEVEL control on the amplifier until you hear distortion, then back it off slightly until the sound is clean.
5. Avoid setting the gain too high, as this can lead to clipping and damage to your subwoofers.

4.3. REM/DC/Audio Switch

This switch controls how the amplifier turns on:

• REM: De amplifier turns on via the remote turn-on wire from the head unit. This is the standard and recommended method.
• DC: De amplifier senses a DC offset on the speaker-level inputs (if using a line output converter or high-level input) and turns on automatically.
• Lyd: De amplifier senses an audio signal on the RCA inputs and turns on automatically.

For most installations with an aftermarket head unit, set this switch to REM.

4.4. Remote Bass Level Control

The remote bass control allows you to adjust the subwoofer output level conveniently from the driver's position without needing to access the amplader direkte.

5. Vedligeholdelse

The Memphis Audio PRX1000.1V2 ampLifier kræver minimal vedligeholdelse for at sikre langsigtet ydeevne.

• Rensning: Tør regelmæssigt af ampRengør ydersiden af ​​apparatet med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Forbindelser: Annually check all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can cause intermittent performance or damage.
• Ventilation: Sørg for, at amplifier's cooling fins are not obstructed by debris or other objects to maintain proper heat dissipation.

6. Fejlfindingsvejledning

Hvis du oplever problemer med din amplifier, refer to the following common issues and solutions before contacting technical support.

7. Specifikationer

Key technical specifications for the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplivligere:

• Model: PRX1000.1V2
• Type: Monoblok subwoofer Amplivligere
• RMS udgangseffekt: 1000 Watts x 1 at 1-Ohm
• Varens vægt: 4.9 pund
• Pakkedimensioner: 10.8 x 7.6 x 4.2 tommer
• Fabrikant: Memphis lyd
• ASIN: B0CX9YJMT7
• Dato først tilgængelig: 27. februar 2024

8. Garanti og support

8.1. Garantioplysninger

The Memphis Audio PRX1000.1V2 amplifier leveres med en 1 års producentgaranti. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear.

For specific warranty terms and conditions, please refer to the documentation included with your product or contact Memphis Audio directly.

8.2. Teknisk support

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact Memphis Audio customer support or your authorized Memphis Audio dealer. You can typically find contact information on the manufacturer's official webwebsted.

When contacting support, please have your product model number (PRX1000.1V2) and proof of purchase readily available.